Rocking Horse Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People who are only getting started will discover the thoughts and jobs in Ted’s package quite simple. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to find any job of their choice in this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available across the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to understand textual directions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Rocking Horse Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the writers in woodworking publications do a story about how to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Rocking Horse Woodworking Plans

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you may wind up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors that you need to remember, before starting with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special sense. Don’t begin a project if you’re not interested, as this may land you at a bad place.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a job.

4. Start projects which you’re able to complete. If you are in the midst of some work, then it is wise to not start any project at all.

The Benefits of Woodworking Rocking Horse Woodworking Plans

If you keep these vital points in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to start with. As a beginner, always select a project which has quite a basic build up or a very simple structure. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Rocking Horse Woodworking Plans

Tools would be the ways through which you can win the struggle of woodworking. A lot of men and women believe power tools are requires. But for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might also buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed price on woodworking projects. Based on the type of job you would like to complete, pricing can be determined. The simple the project, the less price it involves. But at the beginning buying the tools will be a little hefty. Therefore, it’s better to fix a budget first on the resources, then keyword on the project. Purchasing the basic tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is very simple to comprehend the procedure, what to do and the way to do it. Time also has a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing you want to construct, the resources you require to own and the average time it’s possible to devote daily; then you are ready to go.

Conclusion, Rocking Horse Woodworking Plans

All these tips and education will create the woodworking projects and plans for novices fast to complete. Always make sure that you have all of the vital tools, materials, space prepared. Keep the instructions for building a product handy. Appropriate strategy and preparation will help you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Rocking Horse Woodworking Plans

Folks when looking for a way to pass time or want an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to begin with since you will find jobs which can be too difficult for a beginner. But do not worry about that because we are going to give you guidelines on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, so before you pick your project you have to know if you have the available tools to work on such a project. Try not to invest a good deal of money on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Rocking Horse Woodworking Plans

Woodworking at home will provide you time to research unique jobs and find out a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make mistakes and at any time learning about various projects.
It’s extremely important you know about the different kinds of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning which kind of wood they use will help you prepare the wood you will need for certain projects you may want to pursue.
As soon as you understand the fundamentals of wood selection and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good projects to fulfill your needs.

Rocking Horse Woodworking Plans practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of designs utilizing a variety of tools so that you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Rocking Horse Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum number of tools and equipment. A small home workshop may produce a broad variety of simple projects which will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us discuss where you will do your woodworking, based on the dimensions of your home, you might have the ability to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first shop. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the rest of the household. A good compromise might be the garage of your home.

This might help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Rocking Horse Woodworking Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to function in. Rocking Horse Woodworking Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a seat area where you can shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf below the seat to home your hands power tools and a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of your bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Rocking Horse Woodworking Plans

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. You will find plenty of quality gently used tools out there that belong to individuals who stumbled on that 1 molding job around the home or received tools as presents which they will never use. You can usually buy tools for all these sellers for less than half the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh the benefits of traveling around town to save a few added bucks on a cheap piece of equipment. The extra cost of time and travel in these situations is generally justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and complex pieces. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. With this setup I’m protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may prove to be the most flexible tool in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be employed to build an whole house. Eventually, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you start your second job. After selecting the proper saw install a quality blade. Most skill saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It is perfect for cutting holes in timber too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Buy an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you’ll find that your palm sander with just a little bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Start with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a set of the maximum clamps which you can afford. You may contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enable the consumer to quickly open and close the limbs without dull handle turning. The wood clamping surfaces on your vice will occasionally need replacement. I prefer to use soft pine in my vices which will not crush or damage lots of the various forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you might not be using the tape in these spans, the larger tape steps provide more rigid tapes which won’t flop around and slide off the ending of boards. Measuring when you’re on your own will be a lot easier, and of course, quality tape measures can endure for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. The expense of adhesive through all of your projects is a minor cost consideration. For that reason, it makes sense to go with the very best. I have also discovered over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Rocking Horse Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

House on the Rock

The House on the Rock is a tourist attraction located between the cities of Dodgeville and Spring Green, Wisconsin. Opened in 1959,[2] it is a complex of architecturally distinct rooms, streets, gardens, and shops designed by Alex Jordan Jr.

Both of Jordan's biographers[2][3] relate a story told by Sid Boyum,[4] which places the inspiration for the house in a meeting between Alex Jordan Jr. and Frank Lloyd Wright, at some unspecified time between 1914 and 1923. Jordan Sr. supposedly drove with Boyum to Taliesin to show Wright the plans for a building, the Villa Maria in Madison.[5] Jordan worshipped the famous architect and hoped for his approval. Wright looked at the plans and told Jordan: "I wouldn't hire you to design a cheese crate or a chicken coop. You're not capable." Fuming, on the drive back on Highway 23, Jordan pointed to a spire of rock and told Boyum: "I'm going to put up a Japanese house on one of those pinnacle rocks and advertise it."[6] Balousek says Wright "apparently didn't forget the incident", noting that Wright "complained publicly to Iowa County officials about the house the Jordans were building" and bought a nearby piece of property, "perhaps as a way to get back at Jordan."[7]

The legitimacy of this story is also questioned in the biography of Alex Jordan written by Tom Kupsh.[11] Tom Kupsh's book lists many of the same reasons as The House on the Rock website and also states that "The first agreement (an extended lease) with the Christianson family, who owned Deer Shelter Rock, was made some 30 years later in 1953 and no sign appeared at the road entrance until The House on the Rock opened to the public in 1960."

Video: Woodworking Tools