School Woodworking Project | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because all the thoughts and projects Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are in fact lots of things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. People that are only getting started will find the ideas and jobs in Ted’s package quite simple. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who buy it will be backed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large size. Yet, with a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his best to guide them in every conceivable way he could, through simple to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always add to your arsenal as you get experience!

School Woodworking Project Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the authors in woodworking publications do a story on the best way best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home School Woodworking Project

If you are just beginning and very interested in doing a DIY job for house then, woodworking could be interesting. If you do not have the right information, instruction, and skill, you may land up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you should remember, before beginning with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a project if you’re not interested, because this might land you at a terrible location.

2. Think of the main reason for creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start projects that you’re able to finish. If you’re in the midst of a work, then it is better not to start any project in any way.

Finding Woodworking Projects and Plans for Beginners School Woodworking Project

If you keep those essential things in your mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you want to begin with. As a beginner, always pick a job that has quite a basic build up or a simple construction. A few easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always move into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, School Woodworking Project

Tools are the means whereby you will win the battle of woodworking. Many men and women think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws out there in the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You might also buy keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking projects. Based on the sort of project that you would like to complete, pricing could be set. The easy the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the project. Purchasing the basic tools will make certain you don’t have to buy any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things that every newcomer should follow. Instructions manual is quite simple to understand the process, what to do and the way to get it done. It keyword is a systematic manual for completing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that will allow you to achieve success is proper planning. With proper planning and a strategy, it is possible to achieve success immediately. If you know the objective of woodworking, the thing you want to construct, the resources you require to own and the average time you can give every day; then you are ready to go.

Conclusion, School Woodworking Project

All these strategies and education is likely to make the woodworking projects and strategies for beginners fast to complete. Always ensure you have all of the essential tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and planning can allow you to make a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking School Woodworking Project

People if you’re looking for a way to pass time or desire an alternate way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be quite careful when choosing which job to start out with since there are projects that may be too tough for a beginner. But do not worry about that because we are going to provide you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your project you have to know whether you’ve got the available resources to work on such a project. Try not to invest a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking School Woodworking Project

Woodworking in your home will give you time to research different projects and find out a lot of things. That is why it’s very important to invest less money when starting out so you can afford to make mistakes and at some time learning about various projects.
It’s extremely important you know more about different types of wood available for making projects. Expect carpenters use different types of wood quality for decorating bits, learning what kind of wood they use can help you prepare the wood you will need for certain projects you may want to pursue.
Once you know the fundamentals of wood choice and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

School Woodworking Project practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so you may get the hang of using the tools. When starting out you may earn a number of mistakes but with time you will find out how to properly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners School Woodworking Project

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad variety of simple projects that will help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s discuss where you’ll perform your woodworking, based on the size of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, of course, the sound level. You can work without bothering the remainder of the family. A good compromise might be the garage of your property.

This can help minimize the problems of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking School Woodworking Project

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. School Woodworking Project if you’re able to have a dedicated place for a workshop all the greater. Floor tools and bench top gear can remain in place from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, set up a seat area where you are able to store and use the majority of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard over the bench to hang additional equipment. Install a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, School Woodworking Project

The reach of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, purchase your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or alternative local advertisements. There are plenty of quality gently used programs out there that belong to individuals who stumbled on that one molding job around the house or received tools as presents which they will never utilize. You can usually purchase tools for all these sellers for under half the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple extra dollars on a inexpensive piece of equipment. The excess expense of travel and time in these situations is generally justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your skills with your start-up set of tools and prevent lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often known as a skill saw after the popular brand name, this may end up being the most versatile tool in a startup workshop. In fact, at the hands of a professional, a power hand saw can be employed to construct an whole house. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next project. After selecting the proper saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It is ideal for cutting holes in wood too like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more flexible but a excellent floor unit can be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you do not need in your workshop. Purchase an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor version disc and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on the first few projects you’ll find your palm sander with just a bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Start with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Get a pair of the longest clamps which you can afford. You can contact them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enabled the consumer to quickly open and close the limbs without tedious handle turning. The wood beamed surfaces on your vice will periodically need replacement. I would rather utilize soft pine in my vices that won’t crush or damage lots of the various forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape typically from the 25-foot range. Even though in your store you may not use the tape in these spans, the bigger tape measures offer more rigid tapes which will not flop around and slide off the ending of planks. Measuring when you are on your own will be a lot simpler, and naturally, quality tape steps can last for several years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can help you in marking the right angles as well as compound angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are made equal. Avoid inexpensive home brands sold as carpenter’s glue. The cost of adhesive through all your jobs is a minor cost consideration. Therefore, it is sensible to go with the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, School Woodworking Project

The peaceful gratification of woodworking is an excellent experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Tommy Mac (carpenter)

Born in Dorchester, Massachusetts, MacDonald attended the Blue Hills Regional Vocational High School, but dropped out and did not complete his schooling; he later received a GED. He worked as a carpenter for 17 years, but was injured while doing construction work on the Big Dig project in Boston. He later attended the North Bennet Street School in Boston, where he learned woodworking. He started his own business in Canton, Massachusetts, and his work was noticed by Bob Vila, who later invited him to appear on his television series Home Again and on video podcasts for the BobVila.com website.[1] In 2010, MacDonald was signed by WGBH-TV to host his own woodworking instructional program.[2]

After seven seasons, MacDonald's contract with WGBH was not renewed and he had assumed that Rough Cut would end, but WGBH eventually announced a new season of the show with a new host and a similar title. In response, MacDonald filed a lawsuit against WGBH for trademark infringement, citing that advertisements for the new show had used his name, image and trademarks without permission.[3]

Video: Woodworking Tools