Schools That Offer Carpentry | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking whenever they are after because most of the thoughts and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more difficult to make the right choice. There are in fact lots of things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to locate any job of their choice within this bundle quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and those who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every possible way he could, through simple to comprehend textual directions, clear images and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that beginners will need. You may always add to your toolbox as you gain experience!

Schools That Offer Carpentry Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Each month the writers in woodworking publications do a story on how best to increase your woodworking craft. Whether it’s showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Schools That Offer Carpentry

If you’re just beginning and very interested in doing a DIY project for house afterward, woodworking could be interesting. If you do not have the right information, instruction, and ability, you may wind up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Do not start a job if you’re not interested, as this may land you at a bad location.

2. Think of the main reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your skills and examine the time you have, until you start with a job.

4. Start projects which you can complete. If you are in the midst of a work, then it is wise not to start any project at all.

The Benefits of Woodworking Schools That Offer Carpentry

If you maintain these vital points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to start with. As a newcomer, always pick a project that has quite a basic construct up or a very simple structure. A few easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you can always move into the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less frustrating so you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Schools That Offer Carpentry

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women believe power tools are needs. But for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you buy a hammer, always check the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You can also purchase keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this is not a tool for novices, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking projects. Dependent on the sort of project that you would like to complete, pricing could be determined. The simple the project, the less price it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Buying the basic tools will make certain you don’t have to purchase any more material other than the wood ply.

Time and Directions

Directions are among the primary things which each and every newcomer should follow. Instructions guide is very simple to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also has an important role in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you know the objective of woodworking, the item you need to construct, the resources you need to own and the typical time you can give every day; then you are ready to go.

Conclusion, Schools That Offer Carpentry

These tips and education will make the woodworking projects and plans for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and planning will allow you to make a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Schools That Offer Carpentry

People when looking for a way to pass time or want an alternative method to make money they generally turn to a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very cautious when choosing which project to start out with since you will find projects that may be too difficult for a beginner. But don’t worry about that since we will give you guidelines on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you pick your job you have to be aware of whether you have the available resources to work on such a job. Try not to spend a good deal of money on purchasing gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Schools That Offer Carpentry

Woodworking at home will give you time to explore unique jobs and learn so many things. That is why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s extremely important you know about the different kinds of wood available for making projects. Anticipate carpenters use different types of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood choice and the use of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to satisfy your wants.

Schools That Offer Carpentry practice makes perfect so be sure that you practice your work every day if at all possible. Try out lots of designs utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Schools That Offer Carpentry

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimum amount of tools and equipment. A small home workshop may produce a broad variety of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us discuss where you will do your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space to your woodworking activities. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns located in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the sound level. You can work without disturbing the remainder of the family. A good compromise might be the garage of your property.

This can help minimize the problems of dust and sound, however based on where you live, a keyword garage workshop may not be practical during extremes of cold or hot weather.

Starting Your First Woodworking Shop Schools That Offer Carpentry

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Schools That Offer Carpentry if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can stay in place from project to project. If this setup is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, establish a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard above the seat to hang other gear. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Schools That Offer Carpentry

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, purchase your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative regional advertisements. There are plenty of quality gently used tools out there that belong to people who embarked on that one molding job around the house or obtained tools as gifts that they won’t ever use. You can usually purchase tools for these sellers for under half of the original cost and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a couple extra dollars on a inexpensive piece of gear. The excess expense of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of resources and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. With this set up I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this can end up being the most flexible instrument in a start-up workshop. In fact, in the hands of an expert, a power hand saw can be employed to build an entire house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second job. After choosing the right saw put in an excellent blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit can be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you don’t need in your workshop. Buy an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries occur. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more appropriate to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you might find your palm sander with a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in timber pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Get a set of the longest clamps which you can afford. You may get in touch with them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the limbs with no dull handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I prefer to use soft walnut in my vices which will not crush or damage lots of the various woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot range. Although in your store you might not be using the tape in these lengths, the larger tape measures offer more rigid tapes which won’t flop around and slip off the ending of planks. Measuring when you’re by yourself will be a great deal easier, and naturally, quality tape steps can last for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The cost of adhesive through all your projects is a little cost consideration. Therefore, it is sensible to decide on the very best. I have also discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Schools That Offer Carpentry

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic equipment and tools, anyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

North Bennet Street School

North Bennet Street School (NBSS) is a private vocational school in Boston, Massachusetts. NBSS offers nine full-time programs, including bookbinding, cabinet and furniture making, carpentry, jewelry making and repair, locksmithing and security technology, piano technology: basic, piano technology: advanced, preservation carpentry, and violin making and repair, as well as a range of short courses and continuing education opportunities. Housed for more than 130 years at 39 North Bennet Street, near the Old North Church in Boston's North End, the School completed renovations on the former Police Station One and former City of Boston Printing Plant in September 2013. The subsequent move to the fully renovated 65,000 sq. ft. facility at 150 North Street brought all of their programs under one roof.

Founded in 1879 as the North End Industrial Home by volunteers from the Associated Charities as a settlement house serving the needs of recent immigrants, North Bennet Street Industrial School was officially incorporated in 1885. The vocational and preparatory programs underwent changes throughout the nineteenth and twentieth century and the school assumed its present name and mission in 1981.

The North End Industrial Home was originally established at 39 North Bennet Street in 1879 by fifty volunteers from an organization known as the Associated Charities[1] as a settlement house serving the needs of recent immigrants in Boston's North End. In the late nineteenth century, the North End was among the most densely populated areas in the United States.[2] The low-rent tenements near the docks had been drawing immigrants for generations. Driven by a philanthropic philosophy of "elevation by contact",[3] the Associated Charities volunteers sought to improve the circumstances of the poor through visitation and by way of example. The volunteers taught sewing and laundry classes to those they called the "worthy poor": widows, single women, and women supporting their husbands.[4] Class participants received instruction and wages for piece work.[5]

Video: Woodworking Projects