Shed Design Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are following because most of the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are in fact lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit from Ted’s woodworking Package. Those who are just getting started will discover the ideas and jobs in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; however, they will find it really easy to follow Ted’s simple step by step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to locate any job of their choice in this package quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it will be endorsed by a 60-day guarantee, so if this woodworking package fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overrun considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that are available across the net. Ted has done his best to direct them in every conceivable way he could, through easy to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You may always add to your toolbox as you gain experience!

Shed Design Plans Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. When it is showing you how to apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Shed Design Plans

If you’re a beginner and very enthusiastic about doing a DIY job for home then, woodworking can be fun. If you don’t have the proper information, education, and skill, you might wind up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential factors you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a job if you’re not interested, because this might land you in a bad place.

2. Consider the main reason for creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs that you’re able to complete. If you’re in the middle of a work, then it’s better not to begin any project at all.

Starting Your First Woodworking Shop Shed Design Plans

If you maintain those vital points in mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you want to start with. As a beginner, always pick a project which has a very basic construct up or a simple construction. Some simple to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their resources. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Shed Design Plans

Tools would be the ways whereby you will win the struggle of woodworking. A lot of men and women think that power tools are requires. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things much simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available in the market. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills can make the job much simple.

8. Other small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed cost on woodworking jobs. Dependent on the type of job that you would like to complete, pricing could be set. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Therefore, it is better to resolve a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not have to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the process, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and therefore it is necessary for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper planning. With proper planning and a plan, it is possible to achieve success quickly. If you understand the objective of woodworking, then the thing that you want to construct, the resources you need in order to own and the typical time you can devote every day; then you’re all set to go.

Conclusion, Shed Design Plans

These tips and education is likely to create the woodworking projects and strategies for novices fast to complete. Always make sure you have all the essential tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and preparation will allow you to make a great woodworking project for your home.

|

The Benefits of Woodworking Shed Design Plans

People when trying to find a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very careful when choosing which project to start out with since there are jobs which may be too difficult for a beginner. But don’t be concerned about that because we are going to give you guidelines on the ideal means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your project you have to be aware of if you have the available tools to work on such a job. Try not to spend a lot of money on buying equipment when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the hand and the hands.

Starting Your First Woodworking Shop Shed Design Plans

Woodworking at home will give you time to research unique jobs and find out so many things. That is why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about various projects.
It’s very important that you know more about the different kinds of wood available for making jobs. Anticipate carpenters use different types of wood quality for decorating bits, learning which type of wood that they use can allow you to prepare the wood you will need for specific jobs you might want to pursue.
As soon as you understand the basics of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to satisfy your needs.

Shed Design Plans practice makes perfect so make sure you practice your work every day if possible. Try out lots of layouts using various tools so you can get the hang of working with the tools. When starting out you may make a range of errors but with time you will learn how to properly use them and produce quality projects.

|

The Benefits of Woodworking Shed Design Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of gear and equipment. A small home workshop may generate a broad array of simple projects that can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products that you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, based on the size of your home, you might be able to create a dedicated space to your woodworking activities. This might be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your very first shop. A heated shop detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the upper levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the rest of the household. A fantastic compromise might be the garage of your property.

This might help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Shed Design Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to work in. Shed Design Plans if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top equipment can remain in place from project to project. If this installation is not impossible, at least try to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. At the start, establish a seat area where you can store and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to house your hands power tools and a pegboard above the seat to hang other equipment. Put in a woodworking vice at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Shed Design Plans

The scope of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at the local construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are plenty of quality lightly used programs out there that belong to people who stumbled on that 1 molding job around the house or received tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for under half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of gear. The excess cost of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal quantity of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your startup set of tools and prevent lamenting about the equipment you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high noise levels. Select effective hearing protection which you find comfortable and effective. These may contain earplugs or full ear keyword muff protectors. I find a quality pair of ear muff guards is ideal for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw after the popular name, this can end up being the most flexible instrument in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be used to construct an entire property. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your next project. After selecting the right saw put in an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid . These have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot just cut curves. It is ideal for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries happen. Although the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander using a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you could spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the consumer to rapidly open and close the jaws with no tedious handle rotation. The timber clamping surfaces on your vice will occasionally need replacement. I would rather use soft pine in my vices which will not crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you may not use the tape at these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slip off the end of boards. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape steps can endure for several years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Get the number three and two Robertson set. I find that the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes along the way.

Adhesives: Not all glues are created equal. Stay away from inexpensive house brands sold as carpenter’s glue. The expense of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to decide on the best. I have also found over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Shed Design Plans

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Shed

A shed is typically a simple, single-story roofed structure in a back garden or on an allotment that is used for storage, hobbies, or as a workshop. Sheds vary considerably in the complexity of their construction and their size, from small open-sided tin-roofed structures to large wood-framed sheds with shingled roofs, windows, and electrical outlets. Sheds used on farms or in industry can be large structures. The main types of shed construction are metal sheathing over a metal frame, plastic sheathing and frame, all-wood construction (the roof may be asphalt shingled or sheathed in tin), and vinyl-sided sheds built over a wooden frame.

A culture of shed enthusiasts exists in several countries for people who enjoy building sheds and spending time in them for relaxation. In Australia and New Zealand there are magazines called The Shed, an association for shed hobbyists (the Australian Men's Shed Association), and a book entitled Men and Sheds.

The simplest and least-expensive sheds are available in kit form. These kits are designed for regular people to be able to assemble themselves using commonly available tools (e.g., screwdriver). Both shed kits and DIY (do-it-yourself) plans are available for wooden and plastic sheds. Sheds are used to store home and garden tools and equipment such as lawn tractors, and gardening supplies. In addition, sheds can be used to store items that are not suitable for indoor storage, such as petrol (gasoline), pesticides, or herbicides. For homes with small gardens or modest storage needs, there are several types of very small sheds. The sheds not only use less ground area but also have a low profile less likely to obstruct the view or clash with the landscaping.

Video: Woodworking Projects