Shed Designs And Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are after because all the thoughts and projects Ted’s source are simple to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more challenging to make the ideal choice. There are actually lots of things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are only getting started will find the ideas and projects in Ted’s package quite simple. Without doubt, complicated carpentry is demanded; however, they will find it really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice within this package quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it will be backed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large dimensions. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through simple to understand textual directions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Shed Designs And Plans

Woodworking is 1 hobby that could also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Shed Designs And Plans.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to create some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation when you have friends come over to see. They’ll ask: How did you make it? Where did you get the woodworking programs? Just how long did it take to complete the project? What type of wood did you use? What kind of tools did you use? Just how on earth did you make such a gorgeous item of furniture? As you speak about your job, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Shed Designs And Plans

If you are thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Shed Designs And Plans.

Start with a concept in your mind of what you would like to construct then get a excellent woodworking project plan that is geared toward novices. There are numerous little woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can begin with as expansive a woodworking program as you pick. However, the chances are if you start out with a little woodworking job at first, you’ll have a better chance of keyword completing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the amount and variety of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking gear, but it is simple to break the bank buying a great deal of tools you may not utilize all that often. When you do buy tools, buy quality. Do a little research and compare products. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry area to work and may require a set of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that novices will need. You can always add to your toolbox as you gain experience!

Shed Designs And Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Every month the writers in woodworking magazines do a story about the best way best to increase your woodworking craft. Whether it’s showing you how you can apply an end to a finished project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Shed Designs And Plans

If you are just beginning and very enthusiastic about doing a DIY job for home afterward, woodworking can be fun. If you don’t have the right information, education, and ability, you might wind up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having said, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t begin a job if you are not interested, because this might land you at a bad location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of the thing you are making.

3. Consider your skills and examine the time you have, until you begin with a project.

4. Start projects which you can finish. If you’re in the midst of some work, then it is wise not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Shed Designs And Plans

If you maintain those vital things in your mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to begin with. As a newcomer, always pick a job which has a very basic build up or a very simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always proceed into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Shed Designs And Plans

Tools would be the ways through which you can win the struggle of woodworking. Many people believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably easy for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are different types of saws out there on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them can help you in advance woodworking. You might even buy keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking projects. Dependent on the type of project you want to finish, pricing can be determined. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it is better to resolve a budget on the resources, then keyword on the project. Buying the basic tools will ensure that you do not have to purchase any more material other than the wood ply.

Time and Directions

Directions are among the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the project. Time also has a significant role in the building of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper preparation. With proper planning and a strategy, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing you need to construct, the resources you require in order to possess and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Shed Designs And Plans

These strategies and instruction will create the woodworking projects and strategies for novices fast to finish. Always make sure you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and planning can help you to make a great woodworking project for your property.

|

Starting Your First Woodworking Shop Shed Designs And Plans

People if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and anyone can get started.

When doing woodworking at home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which project to start out with because there are jobs that can be too difficult for a beginner. But do not be concerned about that because we will give you guidelines on the ideal way to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you need to know if you have the available resources to work on that job. Try not to invest a lot of cash on buying equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Shed Designs And Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research different projects and find out so many things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about different jobs.
It is extremely important that you know more about different kinds of wood available for making jobs. Anticipate carpenters use different kinds of wood quality for decorating pieces, learning what type of wood they use can help you prepare the wood you’ll need for specific projects you may want to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Shed Designs And Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs using a variety of tools so that you can get the hang of using the tools. When starting out you can make a range of errors but with time you will find out how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Shed Designs And Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum amount of gear and equipment. A small home workshop may produce a broad array of simple projects that will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you’ll perform your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking tasks. This may be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to set up your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the family. A fantastic compromise could be the garage of your home.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Shed Designs And Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Shed Designs And Plans if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in place from project to project. If this installation is not hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the seat to house your hand power tools and a pegboard above the seat to hang additional gear. Install a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Shed Designs And Plans

The reach of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools at your regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find plenty of quality gently used tools out there which belong to individuals who embarked on that one molding project around the home or obtained tools as presents that they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess expense of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimal quantity of hand gear yet generated sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this can end up being the most versatile tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be employed to build an entire house. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next project. After selecting the proper saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid . These possess a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut corners. It’s ideal for cutting holes in wood also like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t need in your workshop. Purchase an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The head usually comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll discover your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find this grade of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in timber bits. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually requires the novice woodworker a couple of years to collect a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure remains the same. Receive a pair of the maximum clamps which you can afford. You can contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the user to quickly open and close the limbs without dull handle turning. The wood beamed surfaces on your vice will periodically need replacement. I would rather use soft pine in my vices that won’t crush or damage many of the different forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you might not be using the tape at these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are by yourself will be a lot easier, and of course, quality tape steps can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Additionally, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I find that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. The expense of adhesive through all your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Shed Designs And Plans

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary tools and equipment, everyone can learn the profitable skills of his time-tested hobby and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

The Shed (Hudson Yards)

The Shed (formerly known as Culture Shed and Hudson Yards Cultural Shed) is a cultural center under construction on the far west side of Manhattan, New York City. Opened on April 5, 2019, the Shed commissions, produces, and presents a wide range of activities in performing arts, visual arts, and pop culture.

The Shed is located in the Bloomberg Building, adjacent to the northern leg of the High Line elevated park, near the Chelsea gallery district. It is attached to 15 Hudson Yards, a skyscraper within the Hudson Yards real estate development, although the Shed itself is located on city-owned land. The cultural center is maintained by an independent nonprofit cultural organization of the same name. The CEO/Artistic Director for the Shed is Alex Poots.

Construction on the Shed started in 2015, using a design from lead architect Diller Scofidio + Renfro and collaborating architect Rockwell Group. The Shed features several architectural features, including a retractable shell that creates a space, named The McCourt, for large-scale performances, installations and events; a 500-seat theater; and two levels of exhibition space. The plans for the cultural center have drawn praise from numerous media outlets and art institutions. It was initially criticized by the surrounding community, but as construction progressed, media reviews of the Shed have leaned more positive.

Video: Woodworking Tools