Shelf Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because all the ideas and projects Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are just getting started will discover the thoughts and jobs in Ted’s package quite simple. Without doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step-by-step instructions. Presently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice within this bundle quite readily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who buy it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every conceivable way he could, through simple to understand textual instructions, clear images and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always increase your arsenal as you get experience!

Shelf Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story about how best to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

The Benefits of Woodworking Shelf Plans

If you’re just beginning and very interested in doing a DIY project for house then, woodworking can be fun. If you do not have the right information, education, and ability, you may land up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors that you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a job if you are not interested, as this may land you in a terrible place.

2. Consider the main reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time you have, before you start with a job.

4. Start jobs that you can finish. If you are in the middle of some work, then it’s better to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Shelf Plans

If you maintain these vital points in your mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking projects that you wish to start with. As a newcomer, always select a project which has quite a basic construct up or a simple construction. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Shelf Plans

Tools are the ways through which you can win the struggle of woodworking. Many people believe power tools are requires. But for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and measurements. The workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, constantly check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you in advance woodworking. You can even purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this is not a tool for novices, but using it might make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking jobs. Based on the type of project you would like to finish, pricing could be determined. The simple the job, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it’s much better to fix a budget first on the resources, then keyword on the undertaking. Buying the basic tools will ensure that you don’t have to buy any more material aside from the timber ply.

Time and Directions

Instructions are one of the principal things that each and every beginner should follow. Instructions guide is very simple to understand the process, what to do and the way to get it done. It keyword is a systematic manual for finishing the job. Time also has a significant part in the construction of woodworking jobs. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, then the thing you want to build, the tools you require to possess and the average time you can devote every day; then you’re ready to go.

Conclusion, Shelf Plans

These tips and instruction is likely to make the woodworking projects and strategies for novices fast to complete. Always ensure you have all the vital tools, materials, space prepared. Keep the instructions for constructing a product handy. Proper strategy and preparation will help you to make a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Shelf Plans

People when trying to find a way to pass time or desire an alternative method to make money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very cautious when choosing which project to start out with because there are jobs which can be too tough for a beginner. But do not worry about that because we will provide you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you have to know whether you’ve got the available tools to work on such a project. Try not to invest a good deal of cash on purchasing gear when starting out, buy more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will not be any difference between the artistic hand and the hands.

Starting Your First Woodworking Shop Shelf Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research unique projects and find out a lot of things. That is why it’s very important to spend less money when starting out so that you can afford to make mistakes and at some time learning about different jobs.
It is extremely important you know more about different kinds of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood that they use will help you prepare the wood you will need for specific jobs you might choose to pursue.
Once you understand the basics of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your wants.

Shelf Plans practice makes perfect so make sure that you practice your work daily if possible. Try out lots of designs using a variety of tools so you can find the hang of using the tools. When starting out you may earn a number of errors but with time you will find out how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Shelf Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can generate a wide array of simple projects that will help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you will perform your woodworking, Depending on the dimensions of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help decrease the difficulties of dust and sound, however depending on where you live, a keyword garage layout might not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Shelf Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Shelf Plans if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in place from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a bench area where you are able to shop and use most of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools along with a pegboard over the bench to hang additional equipment. Install a woodworking vice at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Shelf Plans

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you are starting on a shoestring always buy quality gear. If you can afford it, then purchase your quality tools at your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. You will find plenty of quality lightly used programs out there which belong to people who stumbled on that 1 molding job around the home or obtained tools as gifts which they will never utilize. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will take extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a few extra dollars on a inexpensive piece of gear. The extra cost of travel and time in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand gear yet generated sophisticated and complex pieces. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. With this setup I’m shielding my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Often known as a skill saw after the popular name, this may prove to be the most versatile tool in a startup workshop. In reality, at the hands of a professional, a power hand saw can be used to construct an entire property. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After choosing the right saw install a quality blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid blade. These have a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot only cut corners. It’s ideal for cutting holes in wood also like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the standard 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life will be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Buy an assortment of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Although the most ordinary, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might discover that your palm sander with a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber bits. {Begin with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure is still the same. Receive a pair of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their full length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the consumer to quickly open and close the jaws without dull handle turning. The wood beamed surfaces in your vice will periodically need replacement. I would rather use soft pine in my vices that won’t crush or damage many of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot selection. Even though in your store you might not use the tape in these spans, the bigger tape measures offer more rigid tapes which will not flop around and slip off the ending of boards. Measuring when you are on your own will be a lot simpler, and of course, quality tape measures can last for many decades.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles as well as chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The expense of glue through all of your jobs is a little cost consideration. For that reason, it makes sense to decide on the best. I also have found over the years that I get the best results with both indoor and outdoor projects once I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Shelf Plans

The peaceful gratification of woodworking is an excellent experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most basic equipment and tools, everyone can learn the rewarding skills of his time-tested hobby and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Shelf life

Shelf life is the length of time that a commodity may be stored without becoming unfit for use, consumption, or sale.[1] In other words, it might refer to whether a commodity should no longer be on a pantry shelf (unfit for use), or just no longer on a supermarket shelf (unfit for sale, but not yet unfit for use). It applies to cosmetics, foods and beverages, medical devices, medicines, explosives, pharmaceutical drugs, chemicals, tires, batteries and many other perishable items. In some regions, an advisory best before, mandatory use by or freshness date is required on packaged perishable foods. The concept of expiration date is related but legally distinct in some jurisdictions.[2]

Shelf life is the recommended maximum time for which products or fresh (harvested) produce can be stored, during which the defined quality of a specified proportion of the goods remains acceptable under expected (or specified) conditions of distribution, storage and display.[3]

According to the USDA, "canned foods are safe indefinitely as long as they are not exposed to freezing temperatures, or temperatures above 90 °F (32.2° C)". If the cans look okay, they are safe to use. Discard cans that are dented, rusted, or swollen. High-acid canned foods (tomatoes, fruits) will keep their best quality for 12 to 18 months; low-acid canned foods (meats, vegetables) for 2 to 5 years.[4]

Video: Woodworking Tools