Shop Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are following because all the ideas and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more challenging to make the ideal choice. There are actually many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are just getting started will discover the ideas and projects in Ted’s package quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step-by-step instructions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to locate any job of their choice in this package quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the net. Ted has done his very best to direct them in every possible way he can, through easy to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools that novices will need. You can always add to your toolbox as you get experience!

Shop Woodworking Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve bought your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the writers in woodworking publications do a story on how best to improve your woodworking craft. When it’s showing you the way to apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Starting Your First Woodworking Shop Shop Woodworking Plans

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking can be interesting. If you don’t have the right information, education, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential aspects you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t start a job if you’re not interested, because this might land you at a bad place.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start jobs which you’re able to complete. If you’re in the midst of a work, then it’s better to not begin any project at all.

The Benefits of Woodworking Shop Woodworking Plans

If you keep those essential things in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a newcomer, always pick a project that has quite a basic build up or a very simple construction. Some easy to begin projects include, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Shop Woodworking Plans

Tools would be the means whereby you will win the struggle of woodworking. Many people think that power tools are requires. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws out there in the market. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking projects. Based on the sort of job that you want to complete, pricing can be determined. The simple the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to fix a budget on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t need to purchase any more material other than the wood ply.

Time and Directions

Directions are one of the principal things that each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very simple to comprehend the process, what to do and the way to get it done. It keyword is a systematic manual for finishing the job. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you know the objective of woodworking, the thing that you need to build, the resources you need to possess and the average time it’s possible to devote daily; then you’re all set to go.

Conclusion, Shop Woodworking Plans

These tips and instruction is likely to create the woodworking projects and plans for novices fast to finish. Always ensure that you have all the essential tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Shop Woodworking Plans

People when trying to find a way to pass time or desire an alternate way to make money they generally turn into a hobby they enjoy. It is very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be quite careful when choosing which project to begin with because there are jobs that can be too tough for a newbie. But do not worry about that because we are going to provide you tips on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your job you have to know whether you have the available resources to work on such a job. Try not to spend a good deal of money on purchasing equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will be no gap between the hand and the hands.

The Benefits of Woodworking Shop Woodworking Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking in your home will give you time to research different projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make mistakes and at any time learning about various jobs.
It is very important that you know more about the different types of wood available for creating projects. Expect carpenters use different types of wood quality for decorating bits, learning what type of wood they use can allow you to prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you understand the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Shop Woodworking Plans practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Shop Woodworking Plans

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a broad variety of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us talk about where you will perform your woodworking, based on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to set up your first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without bothering the remainder of the household. A fantastic compromise might be the garage of your home.

This might help minimize the problems of dust and noise, however based on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Shop Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Shop Woodworking Plans if you can have a dedicated place for a workshop all the better. Floor gear and bench top gear can stay in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable growth as you acquire more tools and gear. At the beginning, set up a seat area where you are able to store and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the bench to house your hands power tools and a pegboard over the seat to hang other equipment. Put in a woodworking at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Shop Woodworking Plans

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality lightly used tools out there which belong to individuals who embarked on that one molding project around the home or received tools as presents that they will never use. You can usually purchase tools for all these sellers for under half of the initial cost and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few extra dollars on a inexpensive piece of equipment. The extra cost of time and travel in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your startup set of tools and prevent lamenting about the equipment you wished you had.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to those noise levels can affect hearing and result in tinnitus and other hearing losses. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may end up being the most versatile instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an whole property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you start your second job. After selecting the proper saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut curves. It is perfect for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you don’t want in your workshop. Buy an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor version disc and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander with just a little bit of effort can transform rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood bits. {Begin with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a few years to collect a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you could afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer quick release mechanisms that enable the consumer to rapidly open and close the jaws with no tedious handle turning. The wood clamping surfaces on your vice will occasionally require replacement. I would rather use soft walnut in my vices that won’t crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be one of your most often used tools. Buy a good excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your shop you may not be using the tape in these spans, the bigger tape steps offer more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you’re on your own will be a lot simpler, and naturally, quality tape measures can last for several years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Shop Woodworking Plans

Woodworking is referred to as the construction or the creation of items from wood. You can produce a great deal of unique objects from woodworking and these objects are often as big as gazebos or as small as wooden toys. No matter how big or small your private project maybe you’ll be quite likely to accomplish that aim with woodworking. In addition, woodworking has lots of personal in addition to psychological benefits! In the following article, I am going to briefly identify some of these benefits for you.

Woodworking as a Career:

Individuals who build things from wood are usually known keyword as carpenters. Carpenters can operate on a variety of woodworking projects and job types. For example, some carpenters possess their carpentry business and these folks have the luxury to place their job hours. This benefit allows carpenters the opportunity to spend additional time with their own families and also have less job strain. Raising children is a very difficult task regardless of what way you approach the endeavor! To get a carpenter who possesses their own company, this task might not be as hard because that individual will have more time to become a part of his or her child’s life. By playing a larger part in the life of your child you will be having a larger impact on the type of character that child develops into, which is a massive concern for any loving parent. Besides such advantages, carpentry can also have health benefits too.

Starting Your First Woodworking Shop Shop Woodworking Plans

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a lot. This results in more physical activity, which results in better physical health. Maintaining your body physically healthy is vital and keyword will assist in preventing the occurrence of various illnesses in the foreseeable future life. By being physically fit you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and reduce the chances of having a range of different disorders.

Shop Woodworking Plans, Do It Yourself Woodworking Saves Money:

I always feel as I paid way too much when I go to home improvement shops and purchase patio furniture, and I am certain that I’m not the only person who has felt this way! A successful business owner once told me to always raise the sales price of a product to double what you’ve got it for. In this manner, you always have the option to decrease the product to 50 percent away and still come out without getting any losses. This seems like it may be exactly the same strategy that home improvement stores use in selling their own wooden furniture products. Regardless, there’s a way which you can get around paying the extra cash and that’s to do with building it yourself. Luckily, there are several really good woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different project types. Thus, you really can build whatever you want or see in almost any home improvement store. Doing something does require a little bit of time but time is well spent when you end up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.