Sideboard Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re following because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still seem unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step by step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any project of their choice in this package quite easily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so comprehensive and vast it contains pretty much every woodworking project a woodworker may be interested in building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his very best to guide them in every possible way he could, through easy to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Starting Your First Woodworking Shop Sideboard Woodworking Plans

Woodworking is one hobby that can also be a rewarding career if you love to work together with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Sideboard Woodworking Plans.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to create some really nice furniture to you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How did you make it? Just how long can it take to finish the project? What type of tools did you use? How on earth did you make such a beautiful piece of furniture? As you discuss your job, a feeling of pride will encounter you and also do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Sideboard Woodworking Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Sideboard Woodworking Plans.

Begin with a concept in mind of what you want to build then get a excellent woodworking project plan that’s geared toward beginners. There are several small woodworking projects for beginners available for sale from online woodworking retailers. A few woodworking plan suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Of course, you can start out with as grand a woodworking program as you choose. However, the odds are if you begin using a little woodworking project initially, you will get a better prospect of keyword completing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you need to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget that the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry place to work and may require a pair of saw horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools here, but the concept is to buy the crucial hand and power tools that beginners will need. You may always add to your toolbox as you get experience!

Sideboard Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the authors in woodworking magazines do a story about the best way best to increase your woodworking craft. When it’s showing you how you can apply a finish to a finished job, or how to make a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Sideboard Woodworking Plans

If you are just beginning and very interested in doing a DIY job for house afterward, woodworking can be fun. If you don’t have the right information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a job if you’re not interested, as this may land you in a terrible location.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and examine the time you have, until you start with a job.

4. Start jobs which you can complete. If you’re in the middle of a work, then it is wise not to begin any project at all.

The Benefits of Woodworking Sideboard Woodworking Plans

If you keep these essential things in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to begin with. As a newcomer, always pick a project which has a very basic build up or a very simple construction. A few easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Sideboard Woodworking Plans

Tools would be the means whereby you will win the struggle of woodworking. Many men and women think that power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, offer ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You might also purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for beginners, but using it would make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking jobs. Based on the type of job you want to complete, pricing could be set. The easy the project, the less price it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Directions

Instructions are one of the principal things that each and every newcomer should follow. It is like the woodworking Bible. Instructions guide is very simple to comprehend the procedure, what to do and the way to get it done. Time also has an important part in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which will help you to reach success is proper preparation. With proper planning and a strategy, it’s likely to achieve success immediately. If you know the objective of woodworking, the item you want to construct, the resources you require to own and the average time it’s possible to give daily; then you are ready to go.

Conclusion, Sideboard Woodworking Plans

All these strategies and education will create the woodworking projects and strategies for beginners fast to complete. Always ensure you have all of the essential tools, materials, area prepared. Read the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a great woodworking project for your property.

|

Starting Your First Woodworking Shop Sideboard Woodworking Plans

Folks if you’re looking for a way to pass time or desire an alternative way to make money they usually turn into a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be quite cautious when choosing which job to begin with since there are jobs which may be too difficult for a beginner. But do not be concerned about that because we will provide you guidelines on the right means to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you have to know whether you’ve got the available tools to work on that job. Try not to spend a good deal of cash on buying gear when starting out, buy more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand as well as the normal hands.

Starting Your First Woodworking Shop Sideboard Woodworking Plans

Woodworking at home will give you time to explore unique jobs and find out so many things. That is why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different jobs.
It’s very important you know more about different kinds of wood available for making projects. Anticipate carpenters utilize several kinds of wood quality for decorating bits, learning which kind of wood they use can allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good projects to fulfill your wants.

Sideboard Woodworking Plans practice makes perfect so make sure that you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so you can get the hang of using the tools. When starting out you can earn a number of mistakes but with time you will find out how to correctly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Sideboard Woodworking Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A little home workshop can generate a broad array of simple projects which will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you can appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you’ll do your woodworking, based on the dimensions of your home, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or on your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however depending on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Sideboard Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Sideboard Woodworking Plans if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can stay in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, set up a bench area where you are able to shop and use most of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf below the seat to home your hands power tools along with a pegboard over the seat to hang other gear. Install a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Sideboard Woodworking Plans

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local advertisements. There are plenty of quality gently used tools out there which belong to individuals who stumbled on that 1 molding project around the home or obtained tools as gifts which they will never utilize. You can usually purchase tools for these sellers for less than half the original cost and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private individuals will take additional time and perhaps travel expenditures. Weigh the benefits of traveling around town to save a few extra bucks on a cheap piece of equipment. The excess cost of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular name, this can end up being the most versatile instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be used to build an entire house. Eventually, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second job. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they are a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut corners. It is perfect for cutting holes in timber too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the standard 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their battery life will be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t need on your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents occur. Although the most ordinary, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll find your palm sander using a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Start with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Start with a pair of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the longest clamps that you could afford. You can contact them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle rotation. The timber clamping surfaces in your vice will occasionally need replacement. I would rather use soft pine in my vices that will not crush or damage lots of the various woods that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most frequently used tools. Buy a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you may not use the tape in these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slip off the end of planks. Assessing when you are by yourself will be a lot easier, and of course, quality tape steps can last for many decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Get the number three and two Robertson set. I find the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are made equal. Avoid cheap house brands marketed as carpenter’s glue. The cost of glue through all your projects is a little cost consideration. For that reason, it makes sense to decide on the best. I have also discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Sideboard Woodworking Plans

The peaceful gratification of woodworking is an excellent experience in this era of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most basic equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Gustav Stickley

Gustav Stickley (March 9, 1858 – April 21, 1942) was an American furniture manufacturer, design leader, publisher and the chief proselytizer for the American Craftsman style, an extension of the British Arts and Crafts movement.

One of eleven children of German émigrés Leopold and Barbara Schlager Stoeckel, Gustav Stickley was born Gustavus Stoeckel on March 9, 1858, in Osceola, Wisconsin. The eldest surviving son, Stickley experienced the rigors of life upon a small Midwestern farm, forgoing his formal education in 1870 to continue work in his father’s field of stonemasonry and help support his struggling family. By early 1876, Stickley’s mother and siblings moved to Brandt, Pennsylvania, where Gustav worked in his uncle’s chair factory – his first formal training in the furniture industry.

With his brothers Charles and Albert, Gustav formed Stickley Brothers & Company in 1883, the same year in which he married Eda Ann Simmons.[1] Within five years, the company was dissolved and Stickley’s ambitions led him to partner with Elgin Simonds, a salesman in the furniture trade, to form the firm of Stickley & Simonds in Binghamton, New York. During the 1890s, Stickley divided his efforts between his new enterprise and, with his brother Leopold, served as a foreman of furniture operations at the Auburn State Prison. In 1898 he orchestrated the removal of his business partner and formed the Gustave Stickley Company (he dropped the use of the "e" in 1903).

Video: Woodworking Tools