Simple Timber Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re after because all the ideas and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers are going to have the ability to find any project of their choice within this bundle quite easily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large size. Nonetheless, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that can be found across the net. Ted has done his best to direct them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find inside. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and much more woodworking power tools , but the idea is to buy the essential hand and power tools that beginners will need. You may always increase your arsenal as you gain experience!

Simple Timber Projects Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Each month the writers in woodworking magazines do a story about the best way to improve your woodworking craft. When it is showing you the way you can apply an end to a completed project, or how to make a mortise and tenon joint, something new can be heard every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Simple Timber Projects

If you’re just beginning and very interested in doing a DIY project for house then, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a few essential factors you need to keep in mind, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Making something new with your own hands is a special feeling. Do not begin a project if you’re not interested, as this may land you at a bad location.

2. Think of the main reason for creating this woodworking project. Decide on the uses of the item you’re making.

3. Consider your skills and examine the time that you have, before you start with a job.

4. Start jobs that you can complete. If you are in the midst of a work, then it is better to not start any project in any way.

The Benefits of Woodworking Simple Timber Projects

If you maintain those essential things in your mind before you begin a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking jobs you wish to begin with. As a newcomer, always pick a job that has quite a basic build up or a very simple construction. A few easy to begin projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking projects, like cupboards, sheds, and others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Simple Timber Projects

Tools are the ways whereby you can win the battle of woodworking. Many people believe power tools are needs. But for beginners, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws out there on the marketplace. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You might even purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pens, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed cost on woodworking jobs. Based on the sort of project that you want to finish, pricing can be determined. The easy the job, the less price it involves. However, at the beginning buying the tools will be a little hefty. Therefore, it’s better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not need to buy any more material aside from the wood ply.

Time and Instructions

Directions are one of the principal things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the process, what to do and the way to get it done. Time also has a significant role in the construction of woodworking jobs. Woodworking projects require time and therefore it is necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, the item you need to build, the resources you require in order to possess and the average time it’s possible to devote every day; then you’re all set to go.

Conclusion, Simple Timber Projects

These strategies and instruction will make the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all of the essential tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and planning will help you to make a great woodworking project for your property.

|

How to Become a Master Woodworker From Your Own Home Simple Timber Projects

Folks when looking for a way to pass time or want an alternate way to make money they usually turn to a hobby they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be very careful when choosing which job to begin with because you will find jobs that may be too difficult for a newbie. But do not worry about that because we will give you guidelines on the right way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, so before you choose your job you need to be aware of if you’ve got the available tools to work on that project. Try not to invest a good deal of money on purchasing equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Simple Timber Projects

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking at home will provide you time to research different projects and find out so many things. That is why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about different projects.
It’s extremely important you know about different kinds of wood available for making jobs. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what kind of wood that they use can allow you to prepare the wood you’ll need for specific jobs you might choose to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in building good jobs to satisfy your wants.

Simple Timber Projects practice makes perfect so be sure that you practice your work daily if possible. Try out a lot of layouts using a variety of tools so you may get the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Simple Timber Projects

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum amount of gear and equipment. A little home workshop may generate a wide variety of simple projects which can help you develop your creative and construction skills while rewarding you with artistic and practical wood products that you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us discuss where you will perform your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking tasks. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first store. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields located in the cellar draw dust up into the top levels of the house. Another benefit of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Simple Timber Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Simple Timber Projects if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least try to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. At the beginning, establish a seat area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf beneath the seat to home your hand power tools along with a pegboard above the seat to hang other equipment. Install a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Simple Timber Projects

The reach of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in the regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality lightly used programs out there which belong to people who embarked on that one molding job around the home or obtained tools as gifts which they will never utilize. You can usually buy tools for all these sellers for less than half the initial cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and perhaps travel expenditures. Weigh out the advantages of traveling across town to save a couple extra bucks on a inexpensive piece of gear. The excess cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite brand name, this may end up being the most flexible instrument in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an entire house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your next job. After choosing the proper saw install an excellent blade. Most saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut curves. It is perfect for cutting holes in wood too like handle slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Through tough lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t want in your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you might discover that your palm sander with a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll find that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in timber pieces. {Begin with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a pair of the longest clamps that you can spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of your seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the consumer to quickly open and close the jaws without dull handle turning. The wood clamping surfaces in your vice will occasionally require replacement. I would rather use soft walnut in my vices which won’t crush or damage many of the various forests that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a good quality name brand tape measure with a wide tape usually in the 25-foot range. Although in your store you might not use the tape in these lengths, the larger tape steps provide more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you are on your own will be a lot simpler, and naturally, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I discover that the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered bits. Last, get a pair of 12-inch wood files. The cost of adhesive through all your jobs is a little cost consideration. Therefore, it makes sense to decide on the very best. I also have found over time that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Simple Timber Projects

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Timber framing

Timber framing and "post-and-beam" construction are traditional methods of building with heavy timbers, creating structures using squared-off and carefully fitted and joined timbers with joints secured by large wooden pegs. It is commonplace in wooden buildings from the 19th century and earlier. If the structural frame of load-bearing timber is left exposed on the exterior of the building it may be referred to as half-timbered, and in many cases the infill between timbers will be used for decorative effect. The country most known for this kind of architecture is Germany. Timber framed houses are spread all over the country except in the southeast.

The method comes from working directly from logs and trees rather than pre-cut dimensional lumber. Hewing this with broadaxes, adzes, and draw knives and using hand-powered braces and augers (brace and bit) and other woodworking tools, artisans or framers could gradually assemble a building.

Since this building method has been used for thousands of years in many parts of the world, many styles of historic framing have developed. These styles are often categorized by the type of foundation, walls, how and where the beams intersect, the use of curved timbers, and the roof framing details.

Video: Woodworking Projects