Simple Woodworking Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they’re after because all the ideas and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and jobs in Ted’s package quite easy. No doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will be able to locate any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking packages that are available throughout the internet. Ted has done his best to guide them in every possible way he could, through easy to understand textual directions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. Therefore, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home Simple Woodworking Plans

Woodworking is 1 hobby that could also be a rewarding profession if you love to work together with your hands and build beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to build all kinds of furniture, (beds, table, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Simple Woodworking Plans.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really nice furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you create it? How long can it take to finish the project? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you speak about your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Plans

If you are thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Simple Woodworking Plans.

Start with an idea in your mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for purchase from online woodworking merchants. A couple of woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a couple. Of course, you can start out with as grand a woodworking program as you pick. On the other hand, the chances are if you start out using a little woodworking project at first, you will get a better chance of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Length of: woodworking equipment, the amount and type of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Only buy what you want to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry place to work and might require a pair of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which beginners will need. You can always increase your arsenal as you gain experience!

Simple Woodworking Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Each month the authors in woodworking publications do a story on how to increase your woodworking craft. Whether it’s showing you how you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Simple Woodworking Plans

If you’re a beginner and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you do not have the right information, education, and skill, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential factors you should keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Do not start a project if you’re not interested, because this might land you in a bad place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and analyze the time you have, before you begin with a job.

4. Start projects that you’re able to complete. If you are in the middle of a work, then it’s better to not begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Simple Woodworking Plans

If you keep these essential points in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking jobs that you want to start with. As a newcomer, always pick a job that has a very basic construct up or a simple structure. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Simple Woodworking Plans

Tools would be the means whereby you can win the struggle of woodworking. Many people believe power tools are needs. But for novices, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you buy a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws out there in the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You can even buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking projects. Dependent on the sort of project you want to complete, pricing could be determined. The simple the job, the less cost it involves. But at the beginning purchasing the tools will probably be a little hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you do not have to buy any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things which each and every newcomer should follow. Instructions guide is quite simple to comprehend the process, what to do and how to do it. Time also has a significant part in the building of woodworking jobs. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which can allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the purpose of woodworking, then the item you need to construct, the resources you require to own and the typical time you can give every day; then you’re ready to go.

Conclusion, Simple Woodworking Plans

All these tips and instruction will create the woodworking projects and strategies for novices quickly to complete. Always ensure you have all the essential tools, materials, area ready. Read the instructions for building a product handy. Appropriate strategy and preparation will allow you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Plans

People if you’re trying to find a way to pass time or desire an alternate way to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which project to begin with because there are jobs which may be too tough for a beginner. But don’t worry about that because we are going to provide you tips on the ideal way to start woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your project you have to know whether you have the available resources to work on that job. Try not to spend a good deal of cash on purchasing equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the artistic hand as well as the hands.

Starting Your First Woodworking Shop Simple Woodworking Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to research different projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at any time learning about various projects.
It’s extremely important that you know more about the different kinds of wood available for creating projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you’ll need for certain jobs you might want to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good jobs to fulfill your needs.

Simple Woodworking Plans practice makes perfect so make sure you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so you can find the hang of using the tools. When starting out you can make a number of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Simple Woodworking Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal amount of gear and equipment. A little home workshop may produce a broad array of simple projects that can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you will perform your woodworking, based on the dimensions of your home, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding might be perfect to set up your very first store. A heated shop detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops is, of course, the noise level. You can work without disturbing the remainder of the household. A good compromise could be the garage of your home.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Simple Woodworking Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can stay in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the beginning, establish a bench area where you can store and use most of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf beneath the bench to home your hand power tools along with a pegboard over the seat to hang other gear. Install a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Simple Woodworking Plans

The reach of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality lightly used tools out there that belong to people who embarked on that 1 molding project around the house or received tools as gifts which they will never utilize. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you make a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and possibly travel expenditures. Weigh the benefits of traveling across town to save a few extra dollars on a inexpensive piece of equipment. The excess expense of time and travel in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal quantity of hand gear yet produced sophisticated and intricate bits. Focus on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this may end up being the most flexible tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be used to build an whole house. As mentioned earlier get an excellent manufacturer saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you start your second project. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut corners. It’s ideal for cutting holes in wood too like handle slots. At some point, you’ll want to get a band saw. Bandsaws are much more flexible but a quality floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss over the standard 3/8 inch version. Through hard lessons learned, I have found that buying quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want in your workshop. Buy an assortment of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an excess source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Get a pair of the maximum clamps which you can afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you quick release mechanisms that enabled the consumer to quickly open and close the jaws without dull handle rotation. The wood clamping surfaces on your vice will periodically require replacement. I would rather use soft pine in my vices that will not crush or damage many of the different forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most often used tools. Buy a fantastic quality name brand tape measure with a wide tape typically from the 25-foot selection. Although in your shop you may not be using the tape in these spans, the larger tape measures offer more rigid tapes that will not flop around and slide off the end of planks. Assessing when you’re by yourself will be a lot easier, and of course, quality tape measures can last for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools will help you in marking the right angles in addition to compound angles. Additionally, get an assortment of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of glue through all of your projects is a little cost consideration. For that reason, it makes sense to decide on the best. I also have found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Simple Woodworking Plans

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Workbench (woodworking)

A workbench is a table used by woodworkers to hold workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working. Most benches have two features in common: they are heavy and rigid enough to keep still while the wood is being worked, and there is some method for holding the work in place at a comfortable position and height so that the worker is free to use both hands on the tools. The main thing that distinguishes benches is the way in which the work is held in place. Most benches have more than one way to do this, depending on the operation being performed.

Probably the oldest and most basic method of holding the work is a planing stop or dog ear, which is simply a peg or small piece of wood or metal that stands just above the surface at the end of the bench top. The work is placed on the bench with the end pushed against the stop. The force of the planing keeps the board in place, so long as the force is always toward the stop. Planing against a stop gives the woodworker good feedback - they can tell a lot about what is going on just by the pressure, force and balance required. A stop can take the form of a batten attached to the end of the bench, or it can be adjustable, able to be moved up and down according to the size of the work - or pushed down below the surface when not needed. A simple bench dog can serve as a planing stop.

Another ancient method of holding the work is the hold fast or holdfast. A holdfast looks like a shepherd's crook. The shank goes into a hole in the bench top and the tip of the hook is pressed against the work from above. The holdfast is set by rapping the top with a mallet, and released by hitting the back side. A good holdfast works remarkably well, and is inexpensive and easy to install.

Video: Woodworking Projects