Simple Woodworking Project Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure whether they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal option. There are actually lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step by step directions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to locate any job of their choice in this package quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and those who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large size. Nonetheless, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every possible way he could, through easy to understand textual instructions, clear images and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s certainly worth buying!

How to Become a Master Woodworker From Your Own Home Simple Woodworking Project Ideas

Woodworking is one hobby that could also be a rewarding career if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and eventually become a fine woodworking craftsman, you will have the ability to build all types of furniture, (table, beds, and chairs), with ease. After that you can sell your completed woodworking jobs and make a handsome profit. Simple Woodworking Project Ideas.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking plans? How long can it take to finish the project? What kind of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you speak about your job, a sense of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Simple Woodworking Project Ideas

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Simple Woodworking Project Ideas.

Start with a concept in your mind of what you would like to construct then get a really good woodworking project plan that is geared toward beginners. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Obviously, you can begin with as expansive a woodworking plan as you choose. On the other hand, the chances are if you begin using a small woodworking project initially, you’ll have a better chance of keyword completing the project.

Your woodworking project plan should include some lists! Length of: woodworking equipment, the quantity and type of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you need to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools aren’t cheap. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that frequently. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not overlook that the wood glue and a brush to spread the wood glue! Of course, you’ll require a dry area to work and may need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and much more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Simple Woodworking Project Ideas Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the authors in woodworking publications do a story about how to improve your woodworking craft. When it’s showing you the way to apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be learned each month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Simple Woodworking Project Ideas

If you’re just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking could be interesting. If you do not have the right information, instruction, and skill, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first have to be very interested in woodworking. Making something new with your hands is a special sense. Don’t start a job if you’re not interested, as this may land you at a terrible location.

2. Think of the primary reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start projects that you can finish. If you’re in the midst of a work, then it’s better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Simple Woodworking Project Ideas

If you keep those vital things in your mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a newcomer, always select a job that has a very basic build up or a very simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, and others. Beginning jobs should keyword be less complicated and less bothersome so you have a better comprehension of working with forests and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Simple Woodworking Project Ideas

Tools are the means whereby you will win the battle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters considerably easy for you. When you purchase a hammer, constantly assess the equilibrium between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws available on the market. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you in advance woodworking. You can also buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for beginners, but having it would make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Dependent on the type of job you want to complete, pricing can be set. The easy the job, the less cost it involves. But at the beginning buying the tools will probably be somewhat hefty. Because of this, it’s better to resolve a budget first on the tools, then keyword on the project. Buying the fundamental tools will ensure that you don’t need to purchase any more material aside from the wood ply.

Time and Directions

Directions are one of the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for completing the job. Time also has an important role in the construction of woodworking projects. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that can help you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success immediately. If you know the purpose of woodworking, then the item that you want to build, the tools you need to possess and the typical time it’s possible to devote daily; then you’re all set to go.

Conclusion, Simple Woodworking Project Ideas

All these tips and education is likely to create the woodworking projects and strategies for novices fast to finish. Always ensure that you have all the essential tools, materials, area prepared. Read the instructions for constructing an item handy. Proper strategy and planning can help you to earn a fantastic woodworking job for your property.

|

The Benefits of Woodworking Simple Woodworking Project Ideas

Folks if you’re looking for a way to pass time or want an alternative way to generate money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be very careful when choosing which project to begin with since there are jobs which may be too difficult for a beginner. But don’t be concerned about that since we will give you tips on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you pick your project you need to know if you’ve got the available tools to work on such a project. Try not to invest a lot of cash on purchasing equipment when starting out, buy more equipment as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Simple Woodworking Project Ideas

Woodworking in your home will provide you time to explore different projects and learn so many things. That is why it’s important to invest less money when starting out so you can manage to make mistakes and at some time learning about different jobs.
It’s very important you know about different types of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you’ll need for specific jobs you might choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to satisfy your wants.

Simple Woodworking Project Ideas practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs utilizing various tools so that you can get the hang of using the tools. When starting out you may earn a number of mistakes but with time you will find out how to correctly use them and create quality projects.

|

The Benefits of Woodworking Simple Woodworking Project Ideas

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal number of gear and equipment. A little home workshop may generate a broad array of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us talk about where you will perform your woodworking, Depending on the size of your house, you may have the ability to create a dedicated space to your woodworking activities. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw up dust into the top levels of the house. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Simple Woodworking Project Ideas

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Simple Woodworking Project Ideas if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can remain in place from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to house your hands power tools along with a pegboard over the seat to hang additional equipment. Put in a woodworking vice at one end of the seat on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Simple Woodworking Project Ideas

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in the regional building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other regional ads. There are plenty of quality gently used tools out there which belong to individuals who embarked on that one molding job around the home or received tools as gifts which they will never utilize. You can usually buy tools for all these sellers for less than half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private people will require extra time and possibly travel expenses. Weigh the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The excess expense of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when subjected to high noise levels. Select powerful hearing protection which you find comfortable and effective. These may contain earplugs or full ear keyword muff protectors. I find a quality set of ear muff protectors is ideal for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the favorite name, this can prove to be the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to build an entire house. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you start your second job. After selecting the right saw install an excellent blade. Most skill saws include a starter blade of lower quality even if they are a fantastic saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot only cut curves. It is ideal for cutting holes in wood too like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit can be costly. A jigsaw can be a good stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t need on your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using just a little bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps that you could afford. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs without tedious handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I would rather use soft walnut in my vices which won’t crush or damage lots of the different woods that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most frequently used tools. Purchase a good excellent name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your store you may not be using the tape at these lengths, the larger tape measures offer more rigid tapes which will not flop around and slide off the end of planks. Assessing when you’re on your own will be a great deal simpler, and of course, quality tape measures can endure for many years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can assist you in marking the right angles as well as chemical angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing small mistakes on the way.

Adhesives: Not all glues are made equal. Avoid cheap house brands sold as carpenter’s glue. The expense of adhesive through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the very best. I have also discovered over the years that I get the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Simple Woodworking Project Ideas

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved careers. With a minimal investment in the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Router (woodworking)

A router is a hand tool or power tool that a worker uses to rout (hollow out) an area in relatively hard material like wood or plastic. Routers are mainly used in woodworking, especially cabinetry. Routers are typically handheld or fastened cutting end-up in a router table.

The hand tool type of router is the original form. It is a specialized type of hand plane with a broad base and a narrow blade that projects well beyond its base plate (giving it the nickname old woman's tooth). The power tool form of router with an electric-motor-driven spindle is now the more common form. The hand tool version is now often called a router plane, and for some tasks, still provides a few advantages over the power tool. Some workers consider the electric router one of the most versatile woodworking power tools.[1] CNC wood routers implement the advantages of CNC (Computer Numerical Control).

Related to the router is a smaller, lighter version designed specifically for trimming laminates. It can be used for smaller general routing work. For example, with an appropriate jig it can be used for recessing door hinges and recessing lock faceplates. Even rotary tools can be used as routers when the right bits and accessories (such as a plastic router base) are attached.

Video: Woodworking Tools