Simple Woodworking Project | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re following because all the thoughts and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal option. There are in fact many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those that are only getting started will find the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step by step directions. Currently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice in this package quite easily, though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every conceivable way he could, through easy to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s certainly worth buying!

The Benefits of Woodworking Simple Woodworking Project

Woodworking is one hobby that can also be a rewarding career if you like to work with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a nice woodworking craftsman, you’ll be able to build all kinds of furniture, (table, beds, and chairs), with ease. After that you can sell your finished woodworking jobs and make a handsome profit. Simple Woodworking Project.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you’ll be able to create some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They will ask: How can you create it? Just how long did it take to finish the job? What type of wood did you use? What type of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your job, a sense of pride will encounter you and do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Simple Woodworking Project

If you’re thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it is perfect for beginners!

Where to begin in Woodworking? Simple Woodworking Project.

Start with a concept in your mind of what you want to build then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for purchase from online woodworking retailers. A few woodworking program suggestions to get you thinking are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child simply to name a couple. Of course, you can begin with as expansive a woodworking program as you pick. On the other hand, the odds are if you begin with a small woodworking project at first, you’ll have a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Lists of: woodworking equipment, the quantity and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about buying woodworking tools. Only buy what you need to complete your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking tools, but you can easily break the bank purchasing a lot of tools you might not utilize all that often. When you do buy gear, buy quality. Do a little research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget the wood glue and a brush to spread the wood glue! Of course, you will require a dry area to work and may need a pair of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools here, but the idea is to buy the crucial hand and power tools that novices will need. You can always increase your arsenal as you gain experience!

Simple Woodworking Project Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the writers in woodworking publications do a story about the best way to improve your woodworking craft. Whether it is showing you how you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Project

If you are just beginning and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the right information, education, and ability, you may wind up spending more time and money than you originally intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential aspects you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a project if you’re not interested, because this might land you at a bad place.

2. Think of the primary reason for creating this woodworking project. Decide on the uses of this item you are making.

3. Consider your abilities and examine the time that you have, until you start with a job.

4. Start projects that you’re able to finish. If you are in the middle of a work, then it’s wise not to begin any project in any way.

Starting Your First Woodworking Shop Simple Woodworking Project

If you keep these vital things in your mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking projects that you wish to begin with. As a beginner, always pick a project which has quite a basic build up or a very simple structure. A few easy to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Simple Woodworking Project

Tools would be the ways through which you can win the battle of woodworking. Many men and women believe power tools are needs. But for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws out there in the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You might also purchase keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking jobs. Dependent on the type of job you would like to complete, pricing can be determined. The easy the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not need to purchase any more material other than the timber ply.

Time and Instructions

Directions are among the principal things which every newcomer should follow. Instructions guide is very easy to comprehend the procedure, what to do and how to do it. Time also plays an important part in the construction of woodworking projects. Woodworking projects require time and therefore it’s necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most indispensable thing keyword that can allow you to reach success is proper planning. With appropriate planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, then the item you want to build, the resources you need in order to own and the typical time you can devote every day; then you are all set to go.

Conclusion, Simple Woodworking Project

These tips and education is likely to create the woodworking projects and strategies for novices quickly to complete. Always ensure that you have all the vital tools, materials, area ready. Read the instructions for constructing a product handy. Appropriate strategy and planning can help you to make a great woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Project

Folks when looking for a way to pass time or want an alternative method to generate money they generally turn to a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which job to begin with because you will find projects that may be too tough for a newbie. But don’t worry about that since we will give you tips on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your project you need to know whether you have the available tools to work on that project. Try not to invest a lot of money on buying equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand and the hands.

The Benefits of Woodworking Simple Woodworking Project

Woodworking in your home will provide you time to research different projects and find out a lot of things. That is why it’s important to spend less money when starting out so you can afford to make errors and at any time learning about various projects.
It’s extremely important that you know about the different types of wood available for creating projects. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which kind of wood that they use will help you prepare the wood you’ll need for specific jobs you might want to pursue.
Once you understand the basics of wood selection and the usage of different tools now you can implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good jobs to satisfy your wants.

Simple Woodworking Project practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts using various tools so that you can get the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to properly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Project

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A little home workshop can produce a wide array of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you’ll perform your woodworking, Depending on the size of your house, you might have the ability to create a dedicated space to your woodworking activities. This may be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding might be perfect to prepare your first store. A heated store detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably produce dust which travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops is, clearly, the sound level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however based on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Simple Woodworking Project

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Simple Woodworking Project if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can stay in position from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and gear. At the beginning, establish a seat area where you can shop and use the majority of your equipment, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf below the bench to home your hands power tools along with a pegboard above the seat to hang additional equipment. Install a woodworking vice at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Simple Woodworking Project

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools in the local building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. You will find plenty of quality lightly used programs out there which belong to people who embarked on that one molding job around the house or received tools as presents which they will never use. You can usually purchase tools for all these sellers for under half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private people will require extra time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a few added bucks on a cheap piece of equipment. The extra cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when subjected to elevated sound levels. Last, wear a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may end up being the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be employed to construct an whole property. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It’s perfect for cutting holes in wood also like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this scenario, is more crucial than ever. Cheaper drills have a tendency to have very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not need in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Although the most frequent, hammer injuries are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The mind usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might find your palm sander with just a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber pieces. {Start with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it usually takes the novice woodworker a few years to accumulate a detailed set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Get a set of the maximum clamps that you can afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle rotation. The wood clamping surfaces on your vice will occasionally require replacement. I would rather use soft pine in my vices which won’t crush or damage many of the various forests that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot selection. Even though in your store you may not use the tape at these lengths, the bigger tape steps offer more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you are by yourself will be a great deal easier, and of course, quality tape steps can endure for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. The expense of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the best. I also have found over time that I receive the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Simple Woodworking Project

The peaceful satisfaction of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary tools and equipment, everyone can learn the rewarding abilities of his time-tested avocation and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Fine Woodworking

The magazine focuses on the very best of woodworking techniques at the highest level of skill. Articles include practical tutorials on technique, the theory of timber, finishes or tools, as well as showcases for high-quality finished work. The magazine emphasizes high-quality work regardless of the difficulty of execution.

Collected volumes have also been produced in book form. These began as collections of the best general articles in a numbered series '"Fine Woodworking" Techniques' (8 volumes from 1985 to 1986).[1] Later there were more strongly-themed "Best of Fine Woodworking" collections on particular topics such as: "Joinery",[2] "Making and Modifying Machines", "Bending Wood", "Woodshop Specialities" and many others.

Video: Woodworking Tools