Small Carpentry Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are after because all the ideas and jobs Ted’s source are simple to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People that are only getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They will also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that beginners will need. You can always increase your arsenal as you gain experience!

Small Carpentry Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story about how best to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a finished job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Small Carpentry Projects

If you are just beginning and very enthusiastic about doing a DIY job for home then, woodworking can be fun. If you don’t have the proper information, instruction, and skill, you may land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential aspects you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Making something new with your hands is a particular feeling. Do not start a job if you are not interested, as this may land you at a bad place.

2. Think of the primary reason for making this woodworking project. Decide on the uses of the item you are making.

3. Consider your abilities and analyze the time you have, before you start with a project.

4. Start projects which you can complete. If you’re in the middle of some work, then it’s wise not to start any project in any way.

The Benefits of Woodworking Small Carpentry Projects

If you maintain these vital things in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects you wish to start with. As a beginner, always pick a job which has a very basic build up or a simple structure. A few easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always move to the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Small Carpentry Projects

Tools are the ways through which you can win the struggle of woodworking. Many men and women believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws out there in the market. Choose a size which you could handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s not any fixed price on woodworking jobs. Based on the sort of project you want to finish, pricing could be set. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Because of this, it is much better to resolve a budget first on the resources, then keyword on the project. Purchasing the basic tools will ensure that you do not have to purchase any more material other than the timber ply.

Time and Instructions

Directions are among the primary things which each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite simple to understand the process, what to do and how to get it done. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and therefore it is crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword which can allow you to reach success is proper planning. With proper planning and a strategy, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing that you want to build, the tools you require in order to possess and the typical time you can devote daily; then you’re all set to go.

Conclusion, Small Carpentry Projects

All these strategies and instruction is likely to create the woodworking projects and strategies for novices fast to finish. Always make sure you have all the essential tools, materials, space prepared. Read the instructions for building an item handy. Appropriate strategy and planning will help you to earn a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Small Carpentry Projects

People if you’re looking for a way to pass time or desire an alternative method to make money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which job to begin with because you will find projects that may be too tough for a beginner. But don’t be concerned about that since we are going to give you tips on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you need to know whether you have the available tools to work on such a project. Try not to invest a good deal of money on purchasing equipment when starting out, buy more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no difference between the artistic hand and the normal hands.

The Benefits of Woodworking Small Carpentry Projects

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will provide you time to explore unique projects and learn a lot of things. That is why it’s important to spend less money when starting out so that you can manage to make mistakes and at some time learning about various projects.
It is very important that you know more about the different kinds of wood available for making jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which type of wood they use can allow you to prepare the wood you’ll need for certain jobs you might want to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now employ them in cutting well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Small Carpentry Projects practice makes perfect so make sure you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so that you can find the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Small Carpentry Projects

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop may generate a broad variety of simple projects which can allow you to develop your creative and building abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let us discuss where you’ll do your woodworking, Depending on the size of your home, you might be able to produce a dedicated space to your woodworking tasks. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw up dust into the upper levels of the home. Another advantage of detached workshops would be, clearly, the sound level. You can work without disturbing the remainder of the family. A fantastic compromise might be the garage of your property.

This can help decrease the difficulties of dust and sound, however based on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Small Carpentry Projects

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they include more space to function in. Small Carpentry Projects if you can have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. At the beginning, set up a bench area where you are able to store and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Insert a sturdy shelf below the bench to house your hands power tools and a pegboard over the seat to hang additional equipment. Put in a woodworking at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Small Carpentry Projects

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. You will find an abundance of quality lightly used programs out there that belong to people who stumbled on that 1 molding project around the home or received tools as gifts that they won’t ever use. You can usually purchase tools for all these sellers for under half the original cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenditures. Weigh out the benefits of traveling across town to save a few extra dollars on a cheap piece of equipment. The extra expense of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your skills with your startup set of resources and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the favorite name, this may prove to be the most flexible instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw can be used to construct an entire property. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next project. After choosing the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut corners. It is perfect for cutting holes in timber too like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw can be a good stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their battery life will be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want on your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a set of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might find your palm sander using just a little bit of effort can change rough looking inventions into virtual functions of art! It is possible to use your palm sander to sand and form rough planks using 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an extra source of 100 grit paper. You’ll get that this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure remains the same. Get a set of the maximum clamps that you can spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of your seat is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs without dull handle rotation. The timber clamping surfaces in your vice will periodically require replacement. I would rather use soft pine in my vices that won’t crush or damage lots of the different woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not use the tape in these lengths, the bigger tape steps offer more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape measures can last for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their big flat leads are just too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not all glues are created equal. Avoid cheap house brands sold as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. For that reason, it makes sense to decide on the very best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Small Carpentry Projects

The peaceful gratification of woodworking is an excellent adventure in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most basic tools and equipment, everyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

List of construction trades

Video: Woodworking Tools