Small Timber Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they’re after because all the ideas and jobs Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they should be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. Those that are just getting started will discover the ideas and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s simple step by step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to locate any job of their choice within this package quite easily, though there so many options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found across the net. Ted has done his very best to guide them in every possible way he could, through simple to understand textual directions, clear pictures and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Small Timber Projects

Woodworking is one hobby that can also be a rewarding career if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all types of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking projects and make a handsome profit. Small Timber Projects.

It requires time to become skilled in the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation when you have friends come over to visit. They will ask: How did you create it? How long did it take to complete the project? What type of wood did you use? What kind of tools did you use? How on earth did you make such a gorgeous item of furniture? As you speak about your work, a feeling of pride will encounter you and don’t be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Small Timber Projects

If you’re thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Small Timber Projects.

Begin with an idea in mind of what you want to build and then get a really good woodworking project plan that’s geared toward novices. There are several small woodworking projects for beginners available for purchase from online woodworking merchants. Of course, you can begin with as grand a woodworking program as you choose. However, the chances are if you begin with a little woodworking job at first, you will get a better prospect of keyword finishing the job.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Only buy what you want to finish your instant or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank purchasing a lot of tools you may not use all that often. When you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t overlook the wood glue and a brush to spread the wood glue! Of course, you’ll need a dry place to work and might need a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools that beginners will need. You can always increase your toolbox as you gain experience!

Small Timber Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. But if you’re not certain about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the authors in woodworking magazines do a story about the best way best to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Small Timber Projects

If you’re just beginning and very interested in doing a DIY job for house afterward, woodworking could be interesting. If you don’t have the proper information, education, and ability, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential factors you need to remember, before starting with any woodworking project.

1. If you are a beginner, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular sense. Do not begin a project if you are not interested, because this might land you at a bad place.

2. Consider the primary reason behind making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a project.

4. Start projects which you’re able to finish. If you are in the midst of a work, then it’s better to not start any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Small Timber Projects

If you keep those vital things in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects that you want to start with. As a beginner, always pick a project which has a very basic build up or a simple construction. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Small Timber Projects

Tools would be the ways whereby you can win the struggle of woodworking. Many people believe power tools are needs. But for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make things considerably easy for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws out there on the market. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this is not a tool for beginners, but using it would make work easier for you in a later stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking projects. Dependent on the type of job you would like to finish, pricing can be set. The easy the job, the less cost it involves. However, at the very beginning buying the tools will probably be a little hefty. Because of this, it’s better to resolve a budget first on the resources, then keyword on the project. Buying the fundamental tools will make certain you do not need to buy any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things which every newcomer should follow. It is like the woodworking Bible. Instructions guide is quite simple to comprehend the process, what to do and the way to get it done. It keyword is a systematic manual for finishing the project. Time also plays an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword which will help you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success quickly. If you understand the objective of woodworking, then the thing you want to build, the tools you need in order to possess and the average time it’s possible to devote every day; then you are all set to go.

Conclusion, Small Timber Projects

These strategies and education is likely to make the woodworking projects and strategies for novices fast to finish. Always make sure that you have all the vital tools, materials, space ready. Read the instructions for constructing a product handy. Proper strategy and planning will allow you to make a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Small Timber Projects

Folks if you’re trying to find a way to pass time or want an alternate way to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to start out with because there are jobs that can be too tough for a newbie. But don’t be concerned about that since we will give you tips on the right way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, so before you choose your project you need to know whether you’ve got the available resources to work on that job. Try not to invest a good deal of cash on buying equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no gap between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Small Timber Projects

Woodworking at home will provide you time to research unique jobs and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at some time learning about different projects.
It is very important that you know more about different kinds of wood available for making jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use will help you prepare the wood you’ll need for certain projects you might choose to pursue.
Once you understand the basics of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to satisfy your wants.

Small Timber Projects practice makes perfect so make sure that you practice your work daily if at all possible. Try out lots of layouts using a variety of tools so that you may get the hang of using the tools. When starting out you may make a range of mistakes but with time you will find out how to properly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Small Timber Projects

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal number of tools and equipment. A small home workshop can generate a wide variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you will perform your woodworking, Depending on the dimensions of your house, you might be able to produce a dedicated space to your woodworking tasks. This might be a reserved spot on your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably create dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. You can work without disturbing the rest of the household. A fantastic compromise could be the garage of your home.

This can help decrease the difficulties of dust and sound, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Small Timber Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to work in. Small Timber Projects if you can have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in place from project to project. If this installation is not hopeless, at least try to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and equipment. At the start, set up a bench area where you are able to shop and use the majority of your gear, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools along with a pegboard above the bench to hang other equipment. Install a woodworking vice at one end of the bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Small Timber Projects

The reach of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in the local building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality gently used programs out there which belong to people who embarked on that one molding project around the house or received tools as gifts which they will never utilize. You can usually buy tools for these sellers for under half the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require extra time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a couple added dollars on a inexpensive piece of equipment. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a very simple ball cap with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this can prove to be the most versatile instrument in a start-up workshop. In reality, at the hands of an expert, a power hand saw can be employed to build an entire property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a funding enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second job. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut curves. It is perfect for cutting holes in wood too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need in your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents happen. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you might discover your palm sander using a bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough boards with 100 grit paper and after finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll find that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in timber pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a few years to collect a detailed set of timber clamps. Start with a pair of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps which you can spend. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices that won’t crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your store you may not use the tape in these lengths, the larger tape measures offer more rigid tapes which will not flop around and slide off the end of boards. Assessing when you are by yourself will be a lot easier, and naturally, quality tape measures can last for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Finding Woodworking Projects and Plans for Beginners Small Timber Projects

Woodworking is referred to as the building or the production of items from wood. It is possible to produce a lot of unique items from woodworking and these objects can be as large as gazebos or as small as wooden toys. However large or small your personal project maybe you will be very likely to do that aim with woodworking. Additionally, woodworking has lots of private in addition to psychological benefits! In the following article, I am going to briefly identify some of these benefits for youpersonally.

Woodworking as a Career:

Individuals who build things from wood are usually known keyword because carpenters. Carpenters can work on a variety of woodworking projects and occupation types. For example, a few carpenters possess their carpentry company and these individuals have the luxury to set their job hours. This advantage enables carpenters the opportunity to spend additional time with their families and also have less job stress. Raising kids is a really difficult task regardless of what way you approach the task! To get a carpenter who possesses their own business, this job may not be as hard since that person will have more time to become a part of her or his child’s lifetime. By playing a bigger role in the life span of your child you will be having a larger impact on the type of personality that child develops into, which is a massive concern for any loving parent. In addition to such benefits, carpentry can also have health benefits too.

How to Become a Master Woodworker From Your Own Home Small Timber Projects

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood round a whole lot. This results in more physical activity, which leads to better physical health. Maintaining your body physically fit is vital and keyword will assist in preventing the incidence of various ailments in the foreseeable future life. By being physically healthy you can reduce chances that you will have a heart attack, have seizures, become a diabetic, and lower the chances of giving birth to a number of different illnesses.

Small Timber Projects, Do It Yourself Woodworking Saves Money:

I always feel like that I paid way too far when I go to home improvement shops and purchase patio furniture, and I am sure that I am not the only person that has felt like this! A successful small business owner once told me to constantly increase the sales price of a commodity to double what you got it for. This way, you always have the option to decrease the merchandise to 50 percent off and still come out without getting any losses. This seems like it might be the exact same strategy that home improvement stores use in selling their own wooden furniture products. Regardless, there’s a way that it is possible to get around paying the extra cash and that has to do with building it yourself. Fortunately, there are several really excellent woodworking products offering thousands of detailed woodworking keyword plans for countless different job types. Thus, you can really build whatever you need or see in almost any home improvement store. Doing something does take a little bit of time but time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Timber framing

Timber framing and "post-and-beam" construction are traditional methods of building with heavy timbers, creating structures using squared-off and carefully fitted and joined timbers with joints secured by large wooden pegs. It is commonplace in wooden buildings from the 19th century and earlier. If the structural frame of load-bearing timber is left exposed on the exterior of the building it may be referred to as half-timbered, and in many cases the infill between timbers will be used for decorative effect. The country most known for this kind of architecture is Germany. Timber framed houses are spread all over the country except in the southeast.

The method comes from working directly from logs and trees rather than pre-cut dimensional lumber. Hewing this with broadaxes, adzes, and draw knives and using hand-powered braces and augers (brace and bit) and other woodworking tools, artisans or framers could gradually assemble a building.

Since this building method has been used for thousands of years in many parts of the world, many styles of historic framing have developed. These styles are often categorized by the type of foundation, walls, how and where the beams intersect, the use of curved timbers, and the roof framing details.

Video: Woodworking Tools