Small Wood Craft Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are following because all the ideas and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit out of Ted’s woodworking Package. Those that are only getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step-by-step directions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to have the ability to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it’ll be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to guide them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. Therefore, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Small Wood Craft Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines available. Each month the authors in woodworking publications do a story on the best way to increase your woodworking craft. When it is showing you how you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Small Wood Craft Plans

If you’re a beginner and very enthusiastic about doing a DIY job for house then, woodworking could be fun. If you do not have the right information, education, and skill, you may land up spending more money and time than you originally intended to spend. As a novice woodworker, you need to have space, time and the correct tools. Having mentioned, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your hands is a special feeling. Do not begin a job if you are not interested, as this may land you in a terrible place.

2. Think of the primary reason for making this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start projects which you’re able to finish. If you’re in the middle of some work, then it’s better to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Small Wood Craft Plans

If you keep these vital points in mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to start with. As a beginner, always pick a project which has a very basic build up or a simple construction. Some simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always move to the next level of woodworking projects, like cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so you have a better comprehension of working with woods and their resources. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Small Wood Craft Plans

Tools are the ways through which you will win the battle of woodworking. Many people think that power tools are requires. But for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to work. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available on the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them will help you in advance woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. However, this is not a tool for novices, but having it would make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Based on the type of job that you want to finish, pricing can be set. The simple the project, the less price it involves. However, at the beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you don’t have to purchase any more material aside from the timber ply.

Time and Directions

Directions are among the principal things which every beginner should follow. Instructions guide is quite easy to understand the process, what to do and how to get it done. Time also plays an important part in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a plan, it is likely to achieve success immediately. If you understand the purpose of woodworking, then the item you want to construct, the resources you need in order to own and the typical time it’s possible to devote daily; then you’re ready to go.

Conclusion, Small Wood Craft Plans

All these tips and education is likely to make the woodworking projects and plans for beginners fast to complete. Always ensure that you have all of the vital tools, materials, area ready. Keep the instructions for building a product handy. Proper strategy and preparation will allow you to make a fantastic woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Small Wood Craft Plans

Folks when looking for a way to pass time or desire an alternate method to generate money they usually turn to a hobby that they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very careful when choosing which job to begin with because you will find projects that may be too difficult for a newbie. But don’t worry about that because we are going to give you guidelines on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you choose your project you have to be aware of if you have the available tools to work on that project. Try not to spend a good deal of cash on purchasing equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Small Wood Craft Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking at home will give you time to explore unique jobs and find out so many things. That is why it’s very important to invest less money when starting out so that you can manage to make errors and at some time learning about various projects.
It’s very important you know about different kinds of wood available for creating projects. Expect carpenters use different types of wood quality for decorating bits, learning which type of wood that they use can help you prepare the wood you will need for certain jobs you might want to pursue.
Once you know the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to satisfy your needs.

Small Wood Craft Plans practice makes perfect so make sure you practice your work every day if possible. Try out lots of designs using various tools so that you can get the hang of working with the tools. When starting out you can earn a range of mistakes but with time you will find out how to properly use them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Small Wood Craft Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A small home workshop can generate a broad array of simple projects which can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you’ll perform your woodworking, Depending on the dimensions of your home, you might be able to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first store. A heated shop detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control methods, basement workshops will inevitably produce dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the rest of the family. A fantastic compromise might be the garage of your property.

This can help decrease the problems of dust and noise, however depending on where you reside, a keyword garage workshop might not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Small Wood Craft Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Small Wood Craft Plans if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in position from project to project. If this setup is not impossible, at least try to create a bench area where equipment can be stored and pulled out as needed. If possible plan for inevitable growth as you acquire more tools and equipment. At the start, set up a bench area where you can store and use the majority of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. That will let you work comfortably while standing. Add a sturdy shelf below the seat to home your hand power tools along with a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Small Wood Craft Plans

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools in your regional building and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. There are an abundance of quality lightly used programs out there that belong to people who stumbled on that 1 molding project around the home or obtained tools as presents that they won’t ever utilize. You can usually buy tools for these sellers for less than half the original cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a few extra dollars on a inexpensive piece of equipment. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uneasy.

The next bit of crucial safety equipment you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. With this setup I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this can end up being the most versatile tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be employed to construct an entire house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you start your second project. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid . These have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot just cut corners. It’s ideal for cutting holes in wood too like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you do not need on your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop accidents happen. Even though the most frequent, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you might find that your palm sander with just a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards with 100 grit paper and later finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a typical amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you could afford. You can get in touch with them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the jaws with no dull handle rotation. The timber beamed surfaces on your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which will not crush or damage many of the various forests that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your shop you may not use the tape in these spans, the bigger tape measures provide more rigid tapes which will not flop around and slide off the ending of planks. Measuring when you’re on your own will be a great deal simpler, and of course, quality tape steps can endure for several years.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles as well as compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The expense of adhesive through all of your jobs is a minor cost consideration. For that reason, it makes sense to decide on the best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Small Wood Craft Plans

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodturning

Woodturning is the craft of using the wood lathe with hand-held tools to cut a shape that is symmetrical around the axis of rotation. Like the potter's wheel, the wood lathe is a simple mechanism which can generate a variety of forms. The operator is known as a turner, and the skills needed to use the tools were traditionally known as turnery. In pre-industrial England, these skills were sufficiently difficult to be known as 'the misterie' of the turners guild. The skills to use the tools by hand, without a fixed point of contact with the wood, distinguish woodturning and the wood lathe from the machinists lathe, or metal-working lathe.

Items made on the lathe include tool handles, candlesticks, egg cups, knobs, lamps, rolling pins, cylindrical boxes, Christmas ornaments, bodkins, knitting needles, needle cases, thimbles, pens, chessmen, spinning tops; legs, spindles and pegs for furniture; balusters and newel posts for architecture; baseball bats, hollow forms such as woodwind musical instruments, urns, sculptures; bowls, platters, and chair seats. Industrial production has replaced many of these products from the traditional turning shop. However, the wood lathe is still used for decentralized production of limited or custom turnings. A skilled turner can produce a wide variety of objects with five or six simple tools. The tools can be reshaped easily for the task at hand.

In many parts of the world, the lathe has been a portable tool that goes to the source of the wood, or adapts to temporary workspaces. 21st-century turners restore furniture, continue folk-art traditions, produce custom architectural work, and create fine craft for galleries. Woodturning appeals to people who like to work with their hands, find pleasure in problem-solving, or enjoy the tactile and visual qualities of wood.

Video: Woodworking Tools