Small Wood Project Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are after because most of the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that set Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People who are only getting started will find the ideas and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will find it really easy to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to find any project of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it’ll be endorsed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large size. Yet, with a high-speed internet connection it should download within a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the internet. Ted has done his very best to direct them in every conceivable way he could, through simple to understand textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it is definitely worth buying!

How to Become a Master Woodworker From Your Own Home Small Wood Project Ideas

Woodworking is 1 hobby that can also be a rewarding profession if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Small Wood Project Ideas.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to build some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a subject of conversation when you have friends come over to see. They’ll ask: How can you make it? How long can it take to finish the project? What type of wood did you use? What kind of tools did you use? Just how on earth did you make such a beautiful item of furniture? As you speak about your work, a feeling of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Small Wood Project Ideas

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to begin in Woodworking? Small Wood Project Ideas.

Start with an idea in your mind of what you would like to construct then get a really good woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking retailers. Obviously, you can start out with as grand a woodworking plan as you choose. However, the chances are if you begin with a small woodworking job initially, you’ll have a better chance of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the quantity and variety of wood required, and the essential hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Only buy what you need to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also don’t forget the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry place to work and may require a set of horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You may always add to your toolbox as you get experience!

Small Wood Project Ideas Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines out there. Each month the writers in woodworking magazines do a story on the best way best to improve your woodworking craft. When it is showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Small Wood Project Ideas

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking could be fun. If you do not have the proper information, education, and skill, you might land up spending more time and money than you initially intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors you should remember, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your hands is a special sense. Do not begin a project if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time you have, until you begin with a job.

4. Start projects that you can finish. If you’re in the middle of some work, then it is wise to not start any project at all.

The Benefits of Woodworking Small Wood Project Ideas

If you maintain those vital things in your mind before beginning a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to begin with. As a beginner, always pick a project which has a very basic construct up or a very simple structure. A few simple to start projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always move into the next level of woodworking jobs, like cupboards, sheds, and others. Beginning projects should keyword be complicated and less frustrating so you have a better knowledge of working with forests and their resources. When the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Small Wood Project Ideas

Tools are the means whereby you will win the battle of woodworking. Many people believe power tools are requires. But for novices, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters much simple for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws available in the market. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but using it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed price on woodworking projects. Based on the type of project you would like to finish, pricing can be determined. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it is better to fix a budget on the resources, then keyword on the project. Purchasing the basic tools will make certain you do not have to purchase any more material other than the wood ply.

Time and Instructions

Instructions are one of the principal things that every newcomer should follow. It is like the woodworking Bible. Instructions manual is quite simple to understand the process, what to do and how to get it done. Time also has a significant part in the building of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword which can help you to achieve success is proper planning. With proper planning and a plan, it’s possible to achieve success immediately. If you understand the objective of woodworking, the thing you want to construct, the tools you require to possess and the average time it’s possible to give every day; then you are ready to go.

Conclusion, Small Wood Project Ideas

These strategies and education is likely to create the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all of the vital tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and planning can allow you to make a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Small Wood Project Ideas

Folks if you’re looking for a way to pass time or desire an alternate method to generate money they generally turn to a hobby that they enjoy. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very careful when choosing which job to begin with since there are jobs which may be too difficult for a newbie. But do not worry about that because we will provide you tips on the ideal means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, therefore before you pick your project you have to know if you’ve got the available tools to work on that project. Try not to invest a good deal of money on purchasing gear when starting out, buy more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Small Wood Project Ideas

Woodworking at home will provide you time to explore different projects and learn so many things. That’s why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about various projects.
It is extremely important you know more about different kinds of wood available for making jobs. Expect carpenters utilize different kinds of wood quality for decorating bits, learning which type of wood they use can allow you to prepare the wood you’ll need for certain projects you might want to pursue.
As soon as you understand the basics of wood choice and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in creating good projects to satisfy your wants.

Small Wood Project Ideas practice makes perfect so be sure that you practice your work daily if at all possible. Try out lots of layouts using various tools so you may get the hang of using the tools. When starting out you may make a number of errors but with time you will find out how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Small Wood Project Ideas

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A small home workshop can produce a broad array of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let’s discuss where you’ll perform your woodworking, based on the size of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated shop detached from your home provides one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the top levels of the house. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the rest of the family. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Small Wood Project Ideas

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Small Wood Project Ideas if you can have a dedicated place for a marathon all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment could be stored and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and equipment. In the beginning, set up a bench area where you can shop and use the majority of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Insert a sturdy shelf below the bench to home your hands power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Small Wood Project Ideas

The reach of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools at the regional construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional ads. There are plenty of quality gently used tools out there that belong to individuals who stumbled on that 1 molding project around the house or obtained tools as presents which they will never utilize. You can usually buy tools for all these sellers for under half of the initial price and save even more money if you create a bundle deal for all their unused equipment. Of course, getting tools from private people will require additional time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple added bucks on a cheap piece of equipment. The extra cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking may be long-term and noisy exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire faster when exposed to elevated sound levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust from your hair. With this set up I am shielding my eyes and my ears. I am keeping the dust from my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this may prove to be the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw can be used to construct an entire property. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These tend to cut back and will burn out before you even start your second job. After choosing the proper saw put in a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced enamel count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in timber too like manage slots. At some point, you’ll want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit could be expensive. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss over the standard 3/8 inch version. Down the street, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and a smaller completing hammer for more complex work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on the first few projects you might find that your palm sander using a little bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Begin with a standard number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a pair of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Get a set of the maximum clamps that you can afford. You can contact them for smaller adhesive jobs and expand them to their full length for larger projects.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the jaws with no tedious handle turning. The wood beamed surfaces on your vice will occasionally require replacement. I prefer to use soft walnut in my vices that will not crush or damage lots of the various forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your store you might not use the tape in these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the end of planks. Measuring when you are by yourself will be a lot simpler, and of course, quality tape measures can last for many decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding.

What is Woodworking? The Benefits of Woodworking Small Wood Project Ideas

Woodworking is known as the building or the creation of objects from wood. It is possible to create a great deal of different objects from woodworking and these objects are often as big as gazebos or as small as wooden toys. However large or small your private project maybe you will be quite likely to do that goal with woodworking. Additionally, woodworking has lots of private as well as psychological benefits! In the following guide, I will briefly identify some of the benefits for youpersonally.

Woodworking as a Career:

Individuals who build things from wood are usually known keyword because carpenters. Carpenters can operate on a variety of woodworking jobs and occupation types. For instance, a few carpenters own their carpentry company and these individuals have the luxury to place their job hours. This advantage enables carpenters the chance to spend additional time with their own families and have less job stress. Raising kids is a very difficult task regardless of what way you approach the endeavor! For a carpenter who owns his or her own business, this task might not be as hard since that individual will have more time to become part of her or his child’s life. By playing a larger part in the life of your child you will be having a larger influence on the type of personality that kid develops into, which is a huge concern for any loving parent. In addition to these advantages, carpentry may also have health benefits as well.

The Benefits of Woodworking Small Wood Project Ideas

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood around a lot. This causes more physical activity, which leads to better physical health. Keeping your body physically healthy is vital and keyword will assist in preventing the incidence of various ailments in the foreseeable future life. By being physically fit you can reduce chances you will have a heart attack, have seizures, become a diabetic, and reduce the odds of giving birth to a range of different disorders.

Small Wood Project Ideas, Do It Yourself Woodworking Saves Cash:

I feel as I paid way too much when I visit home improvement stores and purchase patio furniture, and I am sure that I am not the only person who has felt this way! A successful small business owner once told me to always raise the sales price of a commodity to double what you obtained it for. In this manner, you can always decrease the product to 50 percent away and come out without getting any losses. This sounds like it may be the same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that it is possible to get around paying the extra money and that has to do with building it yourself. Fortunately, there are several really good woodworking products offering thousands of comprehensive woodworking keyword plans for hundreds of different job types. Thus, you can really build anything you want or see in almost any home improvement store. Doing something does require a little bit of time but time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Project Habakkuk

Project Habakkuk or Habbakuk (a common misspelling) was a plan by the British during the Second World War to construct an aircraft carrier out of pykrete (a mixture of wood pulp and ice) for use against German U-boats in the mid-Atlantic, which were beyond the flight range of land-based planes at that time. The idea came from Geoffrey Pyke, who worked for Combined Operations Headquarters. After promising scale tests and the creation of a prototype on a lake in Alberta, Canada, the project was shelved due to rising costs, added requirements, and the availability of longer-range aircraft and escort carriers which closed the Mid-Atlantic gap the project was intended to address.

Geoffrey Pyke was an old friend of J.D. Bernal and had been recommended to Lord Mountbatten, Chief of Combined Operations, by the Cabinet minister Leopold Amery. Pyke worked at Combined Operations Headquarters (COHQ) alongside Bernal and was regarded as a genius by Mountbatten.[1]

Pyke conceived the idea of Habakkuk while he was in the United States organising the production of M29 Weasels for Project Plough, a scheme to assemble an elite unit for winter operations in Norway, Romania and the Italian Alps.[1] He had been considering the problem of how to protect seaborne landings and Atlantic convoys out of reach of aircraft cover. The problem was that steel and aluminium were in short supply, and were required for other purposes. Pyke decided that the answer was ice, which could be manufactured for only 1 percent of the energy needed to make an equivalent mass of steel. He proposed that an iceberg, natural or artificial, be levelled to provide a runway and hollowed out to shelter aircraft.

Video: Woodworking Tools