Small Woodshop Ideas | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an instructor and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are following because all the thoughts and jobs Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s package quite simple. No doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s simple step-by-step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any job of their choice in this package quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large size. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overwhelmed considering the fact that this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to understand textual directions, clear images and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more innovative hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that beginners will need. You may always increase your toolbox as you get experience!

Small Woodshop Ideas Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the writers in woodworking publications do a story on how to increase your woodworking craft. When it’s showing you the way you can apply an end to a finished project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is buying instructional DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Small Woodshop Ideas

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may land up spending more money and time than you originally meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you must first have to be very interested in woodworking. Creating something new with your own hands is a special sense. Do not begin a project if you are not interested, because this might land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and analyze the time that you have, before you begin with a project.

4. Start projects which you can complete. If you’re in the midst of a work, then it’s wise not to begin any project in any way.

Starting Your First Woodworking Shop Small Woodshop Ideas

If you maintain these essential points in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you wish to start with. As a newcomer, always pick a job which has a very basic construct up or a simple structure. A few easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so that you have a better comprehension of working with woods and their tools. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Small Woodshop Ideas

Tools are the means through which you will win the struggle of woodworking. Many people think that power tools are needs. But for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Low wattage power drills can make the job much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed cost on woodworking jobs. Based on the sort of project you would like to complete, pricing could be set. The easy the project, the less price it involves. But at the beginning buying the tools will be somewhat hefty. Therefore, it is better to resolve a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t need to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things which each and every newcomer should follow. Instructions manual is quite simple to comprehend the process, what to do and the way to do it. Time also has a significant part in the construction of woodworking projects. Woodworking projects require time and therefore it is necessary for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword which will help you to reach success is proper planning. With proper planning and a strategy, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the thing that you need to construct, the tools you require in order to own and the average time you can give every day; then you are ready to go.

Conclusion, Small Woodshop Ideas

These tips and education will create the woodworking projects and plans for beginners quickly to complete. Always make sure that you have all of the essential tools, materials, area prepared. Read the instructions for building a product handy. Proper strategy and preparation can help you to earn a fantastic woodworking job for your property.

|

The Benefits of Woodworking Small Woodshop Ideas

People if you’re trying to find a way to pass time or want an alternate method to make money they usually turn into a hobby they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be very cautious when choosing which project to start out with since there are jobs which can be too difficult for a newbie. But do not worry about that because we will provide you guidelines on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you pick your project you need to know whether you’ve got the available tools to work on such a job. Try not to spend a good deal of money on buying equipment when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the artistic hand as well as the normal hands.

The Benefits of Woodworking Small Woodshop Ideas

Woodworking at home will give you time to research different jobs and learn a lot of things. That’s why it’s very important to invest less money when starting out so you can afford to make mistakes and at any time learning about different jobs.
It’s extremely important that you know more about the different types of wood available for making jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning what kind of wood they use can allow you to prepare the wood you will need for certain jobs you may want to pursue.
Once you understand the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to fulfill your needs.

Small Woodshop Ideas practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts utilizing various tools so you may find the hang of working with the tools. When starting out you can make a number of errors but with time you will learn how to correctly use them and produce quality projects.

|

The Benefits of Woodworking Small Woodshop Ideas

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You may get started on a shoestring with a minimum number of gear and equipment. A small home workshop can generate a wide array of simple projects that will help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s talk about where you’ll perform your woodworking, Depending on the size of your home, you may be able to create a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first shop. A heated shop detached from your house provides one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the upper levels of the house. Another advantage of detached workshops is, of course, the sound level. You can work without bothering the rest of the household. A good compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however based on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Small Woodshop Ideas

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Small Woodshop Ideas if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup isn’t hopeless, at least try to create a bench area where equipment could be stored and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. In the beginning, set up a seat area where you can store and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools along with a pegboard above the seat to hang other equipment. Put in a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Small Woodshop Ideas

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools in your local construction and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. There are an abundance of quality lightly used programs out there that belong to individuals who embarked on that 1 molding job around the home or received tools as gifts that they will never utilize. You can usually purchase tools for all these sellers for under half the initial cost and save even more money if you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and possibly travel expenses. Weigh out the benefits of traveling across town to save a couple extra bucks on a inexpensive piece of equipment. The extra cost of travel and time in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal quantity of hand equipment yet generated sophisticated and intricate pieces. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a listing of the useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to high sound levels. Last, wear a cap to keep the dust from your hair. I prefer a very simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw following the favorite name, this may end up being the most flexible tool in a startup workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an entire house. Eventually, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next project. After selecting the right saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool cannot just cut corners. It’s ideal for cutting holes in timber too like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an assortment of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the head and handle. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more appropriate to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited quantities of surface area. As you embark on the first few projects you’ll find that your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll find that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools allow you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps which you can spend. You can contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws with no tedious handle rotation. The wood beamed surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices which won’t crush or damage lots of the various forests that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Purchase a fantastic quality name brand tape measure with a wide tape usually from the 25-foot range. Even though in your store you might not be using the tape at these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slip off the ending of planks. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as chemical angles. Also, get an assortment of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and repairing little mistakes on the way.

Adhesives: Not many glues are made equal. Avoid inexpensive home brands marketed as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. For that reason, it makes sense to go with the best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Small Woodshop Ideas

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Ojai Valley School

Ojai Valley School is a co-educational independent boarding school in the Ojai Valley near the city of Ojai, California, United States. The school was founded in 1911 and offers pre-kindergarten through 12th grade education. [1]

The school is located on two campuses in the Ojai Valley. The Lower Campus, located near downtown Ojai, enrolls day and resident students in grades pre-kindergarten to eight. The facilities include a performing arts center, cottage-style classrooms, dormitories, library, art studio, woodshop, technology center, athletic fields, a swimming pool, and stables for the equestrian program.

The Upper Campus, located seven miles (11 km) from downtown Ojai, is nestled amid orange groves and rolling hills in the east of the valley in Upper Ojai. The 195 acres (0.79 km2) campus enrolls day and resident students in grades nine to twelve. The campus is situated on a former cattle ranch and features dormitories, classrooms, athletic fields, climbing wall and ropes course, a swimming pool, as well as art and ceramics studios. The academic program on both campuses is challenging and well-rounded, encouraging students to explore their interests, know themselves, and develop a respect for others. Students participate in outdoor education, equestrian, fine and performing arts programs, as well as athletics and community service.

Video: Woodworking Projects