Small Woodshop Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and a few of those attributes along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are after because most of the ideas and projects Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are only getting started will discover the ideas and jobs in Ted’s package quite easy. Without doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any project of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down due to its large dimensions. Yet, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his best to guide them in every conceivable way he can, through easy to understand textual directions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you gain experience!

Small Woodshop Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking publications do a story on how to improve your woodworking craft. When it is showing you the way you can apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Starting Your First Woodworking Shop Small Woodshop Projects

If you’re a beginner and very interested in doing a DIY job for home afterward, woodworking can be fun. If you don’t have the right information, education, and skill, you might wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential factors you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Do not start a job if you are not interested, because this might land you at a bad location.

2. Think of the main reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and examine the time that you have, until you begin with a job.

4. Start projects which you’re able to complete. If you’re in the middle of a work, then it is wise to not begin any project at all.

The Benefits of Woodworking Small Woodshop Projects

If you keep those vital points in mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects that you wish to begin with. As a beginner, always pick a project which has quite a basic build up or a very simple structure. A few easy to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking jobs, like cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Small Woodshop Projects

Tools are the means through which you can win the battle of woodworking. Many men and women believe power tools are requires. But for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things much easy for you. When you buy a hammer, constantly assess the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at different sizes. There are different types of saws out there on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it would make work simpler for you in a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much simple.

8. Additional small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Dependent on the sort of job you want to complete, pricing can be set. The simple the project, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it is much better to resolve a budget first on the resources, then keyword on the project. Purchasing the basic tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Instructions

Directions are one of the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also plays an important part in the building of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a beginner to have ample amount of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most indispensable thing keyword which can help you to achieve success is proper preparation. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the objective of woodworking, then the thing that you want to build, the tools you need in order to own and the average time you can devote every day; then you are ready to go.

Conclusion, Small Woodshop Projects

All these tips and instruction will make the woodworking projects and strategies for novices fast to finish. Always make sure you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and planning can help you to earn a fantastic woodworking job for your property.

|

The Benefits of Woodworking Small Woodshop Projects

Folks when looking for a way to pass time or want an alternative method to generate money they generally turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which project to begin with because you will find projects that can be too difficult for a beginner. But do not worry about that because we are going to give you tips on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your project you need to know if you’ve got the available tools to work on that job. Try not to spend a lot of cash on buying equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any gap between the artistic hand and the normal hands.

Woodwork Crafts – The Beginners Guide To Woodworking Small Woodshop Projects

Woodworking in your home will provide you time to research different jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so that you can manage to make mistakes and at any time learning about various projects.
It’s extremely important that you know more about the different kinds of wood available for creating jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning what type of wood that they use can help you prepare the wood you will need for specific projects you might choose to pursue.
As soon as you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to satisfy your needs.

Small Woodshop Projects practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of layouts utilizing a variety of tools so that you can get the hang of using the tools. When starting out you can make a number of errors but with time you will find out how to correctly utilize them and produce quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Small Woodshop Projects

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A little home workshop may produce a broad variety of simple projects that will help you develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you will do your woodworking, based on the size of your home, you may have the ability to create a dedicated space to your woodworking activities. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the top levels of the home. Another benefit of detached workshops is, clearly, the sound level. It’s possible to work without bothering the remainder of the household. A good compromise might be the garage of your property.

This can help minimize the problems of dust and noise, however depending on where you live, a keyword garage workshop may not be practical during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Small Woodshop Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they include more space to work in. Small Woodshop Projects if you can have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can remain in position from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the start, set up a bench area where you can shop and use most of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be around waist height. Insert a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the seat to hang additional equipment. Put in a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Small Woodshop Projects

The reach of your startup equipment will be mostly based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality lightly used tools out there which belong to individuals who embarked on that 1 molding job around the home or received tools as gifts which they will never utilize. You can usually buy tools for these sellers for less than half of the original cost and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take extra time and possibly travel expenses. Weigh out the benefits of traveling across town to save a couple extra dollars on a cheap piece of equipment. The extra expense of time and travel in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal amount of hand gear yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually impair your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated sound levels. Last, wear a cap to keep the dust out of your hair. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite brand name, this may end up being the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be employed to construct an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your next project. After choosing the proper saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid . All these possess a balanced enamel count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide frequently. This is one annoyance you do not want in your workshop. Purchase an range of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill bit to its potential slot in the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries happen. Even though the most ordinary, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface area. As you embark on your first few projects you might discover that your palm sander with a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in concept, these tools enable you to taper borders, sew high stains and correct any imperfections in wood pieces. {Start with a typical amount 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a few years to accumulate a detailed set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure remains the same. Receive a pair of the maximum clamps which you could spend. You may contact them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to quickly open and close the jaws without dull handle rotation. The wood beamed surfaces in your vice will occasionally need replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically in the 25-foot range. Even though in your shop you might not be using the tape in these lengths, the bigger tape steps provide more rigid tapes which will not flop around and slip off the ending of boards. Measuring when you are on your own will be a lot simpler, and of course, quality tape measures can last for many years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the ideal angles in addition to compound angles. Also, get an assortment of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not many glues are made equal. Stay away from cheap house brands marketed as carpenter’s glue. The cost of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to decide on the very best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Small Woodshop Projects

The peaceful gratification of woodworking is a wonderful adventure in this era of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Zack Martin (Suite Life)

Zack Martin (played by Dylan Sprouse) is a main character created by Danny Kallis and Jim Geoghan for The Suite Life of Zack & Cody and its sequel/spin-off The Suite Life on Deck. Zack also appeared on cross-over episodes of other Disney Channel series, such as That's So Raven, Wizards of Waverly Place, Hannah Montana, I'm in the Band, So Random! and the special, Studio DC: Almost Live.

Dylan's brother, Cole stated that the idea of twins living in a hotel was something they came up with shooting Big Daddy and staying in a hotel for four months.[1] Sprouse said of Zack and Cody, "The characters were originally based off our personalities. In fact, they were originally named Dylan and Cole."[2]

Zack was born at St. Joseph's Hospital in Seattle, Washington at 6:30 on a Saturday.[3] The year of his birth is not clear. In The Suite Life on Deck episode, "Das Boots", it is said to be 1993.[4] However, in the episode of The Suite Life of Zack & Cody titled "Poor Little Rich Girl", a baby video of he and his brother is date-stamped September 23, 1992.[5]

Video: Woodworking Tools