Small Woodworking Projects That Sell | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because most of the thoughts and projects Ted’s resource are easy to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a truly’complete’ woodworking source.

Many might still appear unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are actually lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are just getting started will find the ideas and projects in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to locate any project of their choice in this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who buy it will be backed by a 60-day warranty, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large dimensions. Yet, using a high-speed online connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that are available across the net. Ted has done his best to direct them in every conceivable way he could, through simple to understand textual instructions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with all the woodworking thoughts and woodworking projects they will find inside. Therefore, it’s certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Small Woodworking Projects That Sell

Woodworking is one hobby that could also be a rewarding career if you love to work with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to construct all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Small Woodworking Projects That Sell.

It takes time to become proficient at the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living space. It will be a subject of conversation whenever you have friends come over to visit. They’ll ask: How can you create it? Just how long did it take to complete the project? What type of tools did you use? Just how on earth did you create such a gorgeous item of furniture? As you speak about your job, a feeling of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Small Woodworking Projects That Sell

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to Begin in Woodworking? Small Woodworking Projects That Sell.

Start with an idea in mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward beginners. There are numerous little woodworking projects for novices available for purchase from online woodworking retailers. Of course, you can start out with as expansive a woodworking plan as you choose. On the other hand, the chances are if you begin with a little woodworking job initially, you’ll get a better prospect of keyword finishing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the amount and variety of wood required, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t cheap. The beginner needs good woodworking gear, but it is simple to break the bank buying a great deal of tools you might not use all that often. If you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry area to work and may require a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the essential hand and power tools which novices will need. You may always increase your toolbox as you gain experience!

Small Woodworking Projects That Sell Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you’re not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the several woodworking magazines available. Every month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it’s showing you the way you can apply a finish to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Small Woodworking Projects That Sell

If you are just beginning and very enthusiastic about doing a DIY project for house then, woodworking could be interesting. If you don’t have the proper information, education, and skill, you might land up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects that you need to remember, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your hands is a particular sense. Don’t start a project if you are not interested, because this might land you at a terrible location.

2. Think of the main reason for making this woodworking project. Decide on the uses of the item you are making.

3. Consider your skills and analyze the time you have, before you start with a project.

4. Start projects which you’re able to finish. If you’re in the middle of a work, then it is better to not begin any project in any way.

The Benefits of Woodworking Small Woodworking Projects That Sell

If you maintain these vital points in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking jobs that you want to start with. As a beginner, always select a project which has quite a basic build up or a very simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should keyword be less complicated and less frustrating so you have a better comprehension of working with forests and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Small Woodworking Projects That Sell

Tools would be the means through which you can win the battle of woodworking. Many men and women believe power tools are requires. But for beginners, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things much simple for you. When you buy a hammer, constantly check the balance between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there on the market. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you in advance woodworking. You might even purchase keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills can make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed price on woodworking projects. Based on the type of job you would like to finish, pricing can be determined. The simple the project, the less price it involves. But at the beginning buying the tools will be a little hefty. Therefore, it is much better to fix a budget on the tools, then keyword on the project. Buying the basic tools will ensure that you don’t need to purchase any more material other than the wood ply.

Time and Instructions

Instructions are one of the principal things that every newcomer should follow. Instructions guide is quite simple to understand the process, what to do and how to get it done. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword which will help you to reach success is proper preparation. With appropriate planning and a strategy, it is possible to achieve success immediately. If you understand the objective of woodworking, the thing you need to build, the tools you need to own and the average time you can devote daily; then you are ready to go.

Conclusion, Small Woodworking Projects That Sell

These tips and instruction will create the woodworking projects and strategies for beginners quickly to finish. Always ensure that you have all the essential tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and planning can help you to make a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Small Woodworking Projects That Sell

People when looking for a way to pass time or desire an alternate method to generate money they usually turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you need to be very cautious when choosing which job to begin with because there are projects which may be too tough for a beginner. But do not worry about that because we will give you tips on the ideal way to start woodworking as a beginner.

Just like any other hobby woodworking demands some working gear, so before you choose your job you have to be aware of whether you’ve got the available tools to work on that project. Try not to invest a lot of cash on purchasing equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Small Woodworking Projects That Sell

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will give you time to research unique jobs and learn so many things. That’s why it’s important to spend less money when starting out so you can afford to make errors and at any time learning about different jobs.
It is very important that you know more about different types of wood available for making jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning which type of wood they use will help you prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you know the basics of wood choice and the use of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in building good jobs to fulfill your needs.

Small Woodworking Projects That Sell practice makes perfect so make sure you practice your work daily if at all possible. Try out a lot of designs using a variety of tools so you may get the hang of working with the tools. When starting out you may earn a number of errors but with time you will find out how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Small Woodworking Projects That Sell

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop can generate a wide variety of simple projects that can help you develop your creative and building abilities while rewarding you with practical and artistic wood products that you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you might have the ability to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your very first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably create dust which travels to the living area of your house. This is particularly true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the family. A fantastic compromise might be the garage of your property.

This might help minimize the problems of dust and sound, however based on where you live, a keyword garage workshop may not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Small Woodworking Projects That Sell

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Small Woodworking Projects That Sell if you can have a dedicated spot for a workshop all the better. Floor gear and bench top equipment can stay in position from project to project. If this installation isn’t impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a seat area where you can store and use most of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the bench to home your hands power tools and a pegboard over the seat to hang other equipment. Put in a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Small Woodworking Projects That Sell

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. There are an abundance of quality lightly used programs out there which belong to individuals who stumbled on that one molding job around the home or obtained tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private people will take additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a few extra dollars on a cheap piece of equipment. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand gear yet produced sophisticated and intricate bits. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire faster when exposed to high noise levels. Select powerful hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I’m keeping the dust from my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this can end up being the most versatile instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be used to construct an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Start with a hybrid . These have a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut curves. It is ideal for cutting holes in wood too like handle slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not need in your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the shop, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you’ll find your palm sander with a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Though low tech in concept, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber pieces. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a few years to accumulate a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Get a set of the longest clamps which you could afford. You may contact them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to quickly open and close the limbs with no dull handle turning. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to use soft walnut in my vices which will not crush or damage lots of the various woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among your most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually in the 25-foot range. Even though in your shop you may not use the tape in these lengths, the larger tape steps provide more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you are on your own will be a lot simpler, and naturally, quality tape measures can endure for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles as well as compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The cost of adhesive through all your projects is a minor cost consideration. Therefore, it makes sense to go with the very best. I have also found over time that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Small Woodworking Projects That Sell

The peaceful satisfaction of woodworking is an excellent adventure in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic equipment and tools, everyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood veneer

In woodworking, veneer refers to thin slices of wood, usually thinner than 3 mm (1/8 inch),[1] that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in Wood Veneer HPL. Veneer is also a type of manufactured board.

Veneer is obtained either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer-making equipment used commercially:

Each slicing processes gives a very distinctive type of grain, depending upon the tree species. In any of the veneer-slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side.

Video: Woodworking Projects