Step By Step Wood Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re after because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still seem unsure if they should be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the ideal choice. There are actually many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are only getting started will find the ideas and projects in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s easy step-by-step directions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to find any job of their choice in this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overrun considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available throughout the net. Ted has done his best to direct them in every conceivable way he could, through simple to understand textual directions, clear pictures and even movies as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking projects they will find within. So, it’s definitely worth buying!

The Benefits of Woodworking Step By Step Wood Projects

Woodworking is 1 hobby that could also be a rewarding profession if you like to work with your hands and build beautiful pieces of furniture from wood. When you learn the woodworking crafts and eventually become a fine woodworking craftsman, you’ll be able to construct all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Step By Step Wood Projects.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will be able to build some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and using it sit on your living space. It will be a topic of conversation when you have friends come over to see. They will ask: How did you make it? Just how long can it take to finish the job? What kind of wood did you use? What type of tools did you use? How on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Step By Step Wood Projects

If you’re thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it’s ideal for beginners!

Where to begin in Woodworking? Step By Step Wood Projects.

Begin with an idea in your mind of what you would like to build then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for beginners available for sale from online woodworking retailers. Obviously, you can begin with as grand a woodworking plan as you choose. However, the odds are if you begin with a small woodworking project initially, you will get a better chance of keyword finishing the job.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Just buy what you want to complete your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not utilize all that often. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you will need a dry area to work and may require a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools here, but the concept is to buy the crucial hand and power tools that novices will need. You can always add to your toolbox as you gain experience!

Step By Step Wood Projects Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the writers in woodworking publications do a story on the best way to improve your woodworking craft. Whether it is showing you the way to apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be learned every month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Step By Step Wood Projects

If you are a beginner and very enthusiastic about doing a DIY job for house afterward, woodworking can be interesting. If you do not have the right information, instruction, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a few essential aspects you need to keep in mind, before starting with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t start a project if you are not interested, as this may land you at a bad place.

2. Think of the primary reason behind making this woodworking project. Choose the uses of the item you are making.

3. Consider your abilities and analyze the time that you have, until you begin with a project.

4. Start projects that you’re able to finish. If you are in the middle of a work, then it is wise not to start any project at all.

How to Become a Master Woodworker From Your Own Home Step By Step Wood Projects

If you keep these essential points in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs you wish to begin with. As a newcomer, always select a project which has quite a basic construct up or a simple construction. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you could always move to the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Step By Step Wood Projects

Tools are the ways through which you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly check the balance between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are different types of saws available on the market. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it would make work simpler for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed cost on woodworking jobs. Based on the type of job that you want to finish, pricing can be set. The easy the job, the less price it involves. But at the very beginning buying the tools will be somewhat hefty. Therefore, it’s better to fix a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material other than the timber ply.

Time and Instructions

Instructions are one of the principal things which every newcomer should follow. It is like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and the way to do it. It keyword is a systematic manual for finishing the job. Time also has a significant role in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword that can help you to achieve success is proper planning. With proper planning and a strategy, it is possible to achieve success quickly. If you know the purpose of woodworking, the thing you need to build, the resources you require to possess and the typical time it’s possible to give daily; then you’re ready to go.

Conclusion, Step By Step Wood Projects

These strategies and education will create the woodworking projects and strategies for beginners quickly to finish. Always ensure you have all the vital tools, materials, area prepared. Keep the instructions for building an item handy. Appropriate strategy and planning can allow you to make a fantastic woodworking job for your home.

|

Finding Woodworking Projects and Plans for Beginners Step By Step Wood Projects

People if you’re looking for a way to pass time or desire an alternative method to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of projects one can think of. When starting out you have to be quite careful when choosing which job to begin with since you will find jobs which may be too difficult for a newbie. But do not worry about that because we are going to give you tips on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you need to know whether you’ve got the available tools to work on that project. Try not to invest a good deal of money on purchasing gear when starting out, buy more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any difference between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Step By Step Wood Projects

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will give you time to research different jobs and learn a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different jobs.
It is extremely important that you know about different types of wood available for making jobs. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning what type of wood that they use can allow you to prepare the wood you’ll need for certain projects you may choose to pursue.
Once you know the fundamentals of wood choice and the use of different tools now you can employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in creating good projects to satisfy your needs.

Step By Step Wood Projects practice makes perfect so make sure you practice your work every day if possible. Try out lots of designs utilizing various tools so you can get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Step By Step Wood Projects

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can generate a broad variety of simple projects that can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will perform your woodworking, Depending on the size of your home, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to set up your very first store. A heated store detached from your house provides one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the family. A good compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

Woodwork Crafts – The Beginners Guide To Woodworking Step By Step Wood Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes they add more space to function in. Step By Step Wood Projects if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and gear. At the beginning, establish a bench area where you can store and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard above the seat to hang additional gear. Install a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Step By Step Wood Projects

The reach of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in the local building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find plenty of quality gently used programs out there that belong to people who embarked on that 1 molding project around the home or obtained tools as presents that they won’t ever utilize. You can usually purchase tools for all these sellers for under half the original cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private people will require additional time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The excess expense of travel and time in these situations is generally justified when purchasing large ticket items such as table saws, bandsaws or high finished tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimal amount of hand equipment yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you’d.
Here is a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uneasy.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire faster when subjected to elevated sound levels. Last, wear a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may end up being the most flexible instrument in a start-up workshop. In reality, in the hands of a professional, a power hand saw could be employed to construct an entire house. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After choosing the right saw put in an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a backup and install a quality blade with carbide teeth. Start with a hybrid blade. These possess a balanced enamel count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut curves. It is perfect for cutting holes in wood also like handle slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch version. Through hard lessons learned, I have found that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is one annoyance you don’t need on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its prospective slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited for rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover that your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in timber bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you operate on them. Unfortunately, good clamps are costly and it usually requires the novice woodworker a few years to accumulate a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you could spend. You may get in touch with them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of your seat is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the jaws with no tedious handle rotation. The timber beamed surfaces in your vice will occasionally need replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the various woods that I utilize. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most frequently used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot range. Even though in your store you might not be using the tape in these lengths, the larger tape steps provide more rigid tapes which won’t flop around and slide off the ending of planks. Assessing when you are by yourself will be a great deal easier, and naturally, quality tape measures can last for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works best for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes along the way.

Adhesives: Not all glues are made equal. Avoid cheap home brands marketed as carpenter’s glue. The expense of glue through all your projects is a little cost consideration. Therefore, it is sensible to go with the very best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Step By Step Wood Projects

The peaceful gratification of woodworking is a wonderful experience in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment in the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

List of Step by Step episodes

The following is a list of episodes for the sitcom Step by Step. It premiered on September 20, 1991 on ABC, then moving to CBS ending on June 26, 1998. A total of 160 episodes, spanning seven seasons, were produced.

Video: Woodworking Projects