Storage Furniture Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they are after because all the thoughts and projects Ted’s source are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. People that are only getting started will find the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this bundle quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to guide them in every possible way he can, through easy to understand textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find inside. So, it is certainly worth buying!

The Benefits of Woodworking Storage Furniture Plans

Woodworking is one hobby that could also be a rewarding profession if you love to work together with your hands and construct exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you will be able to construct all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Storage Furniture Plans.

It takes time to become skilled at the craft of woodworking. The wonderful thing about working up to this expert craftsman level is you will be able to create some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit on your living room. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How did you create it? Where did you get the woodworking plans? How long can it take to finish the project? What kind of wood did you use? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

Starting Your First Woodworking Shop Storage Furniture Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to Begin in Woodworking? Storage Furniture Plans.

Start with a concept in mind of what you want to build then get a really good woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking merchants. Obviously, you can start out with as expansive a woodworking program as you choose. However, the chances are if you start out using a little woodworking job initially, you’ll have a better chance of keyword finishing the project.

Your woodworking project plan should include some lists! Length of: woodworking hardware, the quantity and type of wood required, and the essential hand tools and power tools to finish the undertaking. Note: A word of warning about buying woodworking tools. Just buy what you want to finish your instant or upcoming endeavor. This is important especially if you’re a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking tools, but you can easily break the bank buying a lot of tools you might not use all that frequently. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood glue! Obviously, you’ll require a dry area to work and might require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to purchase the crucial hand and power tools which beginners will need. You can always add to your arsenal as you gain experience!

Storage Furniture Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines out there. Every month the writers in woodworking publications do a story about how to improve your woodworking craft. Whether it is showing you how to apply an end to a finished project, or how to make a mortise and tenon joint, something new could be heard every month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Storage Furniture Plans

If you’re a beginner and very enthusiastic about doing a DIY project for home afterward, woodworking could be fun. If you don’t have the right information, instruction, and ability, you may land up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having said, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Do not begin a project if you’re not interested, because this might land you at a terrible location.

2. Think of the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your skills and examine the time you have, before you start with a project.

4. Start jobs that you can finish. If you’re in the middle of a work, then it’s wise to not start any project at all.

Starting Your First Woodworking Shop Storage Furniture Plans

If you keep those vital things in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking projects you want to start with. As a newcomer, always select a project that has quite a basic build up or a simple structure. A few easy to begin projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with forests and their tools. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Storage Furniture Plans

Tools are the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are needs. However, for novices, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at different sizes. There are different types of saws available in the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work simpler for you in a later stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is not any fixed cost on woodworking jobs. Dependent on the sort of job that you want to complete, pricing could be determined. The simple the job, the less cost it involves. But at the very beginning buying the tools will probably be somewhat hefty. Therefore, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you do not have to purchase any more material aside from the timber ply.

Time and Instructions

Instructions are one of the principal things which every beginner should follow. Instructions guide is very simple to understand the procedure, what to do and how to do it. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and so it is crucial for a novice to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword that will allow you to reach success is proper planning. With proper planning and a plan, it is possible to achieve success immediately. If you understand the objective of woodworking, then the thing that you want to construct, the resources you need to own and the typical time you can give every day; then you are ready to go.

Conclusion, Storage Furniture Plans

These strategies and instruction is likely to make the woodworking projects and plans for novices quickly to complete. Always ensure that you have all the vital tools, materials, area ready. Read the instructions for building a product handy. Appropriate strategy and preparation can help you to earn a great woodworking job for your property.

|

Starting Your First Woodworking Shop Storage Furniture Plans

Folks when trying to find a way to pass time or desire an alternate method to make money they usually turn to a hobby that they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you have to be very careful when choosing which job to start out with because there are jobs that can be too tough for a beginner. But do not be concerned about that because we are going to give you tips on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking requires some working gear, therefore before you pick your job you have to know whether you have the available resources to work on that project. Try not to spend a lot of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any difference between the artistic hand and the normal hands.

Starting Your First Woodworking Shop Storage Furniture Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will give you time to research different projects and find out so many things. That is why it’s very important to invest less money when starting out so that you can manage to make errors and at any time learning about various projects.
It’s extremely important that you know about the different types of wood available for making projects. Expect carpenters utilize different kinds of wood quality for decorating bits, learning what type of wood they use will help you prepare the wood you will need for specific jobs you might want to pursue.
As soon as you know the fundamentals of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in creating good projects to fulfill your needs.

Storage Furniture Plans practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of designs using a variety of tools so that you may get the hang of using the tools. When starting out you may earn a number of mistakes but with time you will learn how to properly use them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Storage Furniture Plans

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimal number of tools and equipment. A small home workshop can produce a wide variety of simple projects that will help you develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you’ll do your woodworking, based on the size of your home, you might be able to produce a dedicated space to your woodworking activities. This might be a reserved place in your garage or on your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Storage Furniture Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Storage Furniture Plans if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top gear can stay in place from project to project. If this setup isn’t hopeless, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and gear. At the start, set up a bench area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the seat to home your hand power tools and a pegboard above the bench to hang other gear. Put in a woodworking at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Storage Furniture Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then buy your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. You will find an abundance of quality lightly used tools out there which belong to people who stumbled on that one molding job around the home or obtained tools as presents that they won’t ever utilize. You can usually purchase tools for these sellers for under half the original cost and save even more money should you make a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a few extra bucks on a cheap piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal amount of hand equipment yet produced sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you had.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when subjected to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. Last, put on a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently known as a skill saw following the popular name, this can end up being the most versatile tool in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be employed to construct an entire property. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you start your next project. After selecting the right saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid . These possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t only cut corners. It’s ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a ring saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Buy an assortment of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Even though the most frequent, hammer accidents are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface space. As you embark on the first few projects you’ll find that your palm sander with a bit of effort can transform rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll find this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper edges, flatten high spots and fix any imperfections in wood bits. {Start with a typical number 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a pair of the longest clamps which you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the jaws with no tedious handle turning. The timber clamping surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices which won’t crush or damage lots of the various woods that I utilize. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Purchase a good quality name brand tape measure with a wide tape usually from the 25-foot range. Even though in your shop you may not use the tape at these lengths, the bigger tape steps provide more rigid tapes which won’t flop around and slide off the ending of planks. Assessing when you’re on your own will be a great deal easier, and naturally, quality tape steps can endure for several decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need extra sanding.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Storage Furniture Plans

Woodworking is referred to as the construction or the production of items from wood. You can create a lot of different items from woodworking and these items can be as big as gazebos or as little as wooden toys. No matter how large or small your personal project maybe you will be very likely to accomplish that goal with woodworking. In addition, woodworking has many personal in addition to psychological benefits! In the following article, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A good deal of individuals who love to work with their hands have turned that love into a career through woodworking. People who build things out of wood are usually known keyword because carpenters. Carpenters can work on a variety of woodworking jobs and occupation types. For instance, some carpenters possess their carpentry business and these folks have the luxury to place their job hours. This benefit allows carpenters the chance to spend additional time with their own families and have less job stress. Raising kids is a very difficult task regardless of what way you approach the endeavor! For a carpenter who owns their own business, this job may not be as hard because that person is going to have more time to become a part of her or his child’s life. By playing a larger role in the life span of your child you’ll be having a larger influence on the type of personality that kid develops into, which is a huge concern for any loving parent. In addition to such advantages, carpentry may also have health benefits as well.

The Benefits of Woodworking Storage Furniture Plans

Physical Health Benefits of Woodworking:

Woodworking necessitates working with and carrying wood round a lot. This causes more physical activity, which leads to better physical health. Keeping your body physically healthy is really important and keyword can assist in preventing the occurrence of various ailments in the foreseeable future life. By being physically fit you can decrease chances you will have a heart attack, have seizures, turned into a diabetic, and lower the odds of giving birth to a range of different disorders.

Storage Furniture Plans, Do It Yourself Woodworking Saves Cash:

I always feel like I paid way too much when I go to home improvement stores and buy patio furniture, and I am certain that I am not the only person who has felt like this! A successful business owner once told me to constantly increase the sales price of a commodity to double what you’ve obtained it for. This way, you always have the option to decrease the product to 50 percent away and come out without getting any losses. This seems like it may be exactly the same strategy that home improvement shops use in selling their wooden furniture products. Regardless, there is a way that you can get around paying the additional money and that has to do with building it yourself. Luckily, there are several really excellent woodworking products offering thousands of detailed woodworking keyword plans for countless different job types. So, you can really build whatever you want or see in any home improvement store. Doing something does take a little bit of time but the time is well spent when you wind up saving hundreds of dollars because of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

King Living

King Living (previously known as King Furniture) is an Australian furniture retail chain, furniture designer and manufacturer. Established in Sydney in 1977, the King Living brand currently has 15 showrooms in Australia,[1] as well as international showrooms in New Zealand[2] as well as Malaysia and Singapore.[3] In 2018, King Living plans to enter the Canadian market with a location in the South Granville area of Vancouver.[4]

The King Living furniture range includes contemporary leather and fabric sofas as well as dining furniture, bedroom, storage and outdoor furniture.[7][8] King Living sofas feature steel frames and comfort seat suspension. Furniture designs also include seats with electric reclining motion and the ability to attach lights, sound speakers and tables.[3][9][10][11]

King Living has received industry awards for its furniture designs. In 2005 the King Living Delta II sofa was featured on the Oprah Winfrey Show by famous interior designer Nate Berkus[12] The King Living Delta sofa has also been featured at famous events, such as Vanity Fair's Oscars After Party.[13][14] In 2016, King Living won Sydney Hills Business Award.[15]

Video: Woodworking Tools