Storage Shed Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re after because all the thoughts and jobs Ted’s resource are easy to understand and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the right option. There are actually many things that set Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that are available across the net. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual directions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and more woodworking power tools , but the idea is to purchase the essential hand and power tools which beginners will need. You may always add to your arsenal as you gain experience!

Storage Shed Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have bought your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should provide you step by step directions and methods to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the authors in woodworking magazines do a story on how to increase your woodworking craft. Whether it is showing you how to apply an end to a finished project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is purchasing educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Storage Shed Plans

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking could be interesting. If you do not have the right information, education, and skill, you may land up spending more money and time than you initially meant to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a couple of essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you are just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a special sense. Do not begin a job if you’re not interested, because this might land you at a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start jobs that you’re able to complete. If you’re in the midst of a work, then it’s wise not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Storage Shed Plans

If you keep those essential things in mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking projects you want to start with. As a beginner, always select a project which has quite a basic construct up or a very simple structure. A few simple to start projects include, bird feeder, chairs, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Storage Shed Plans

Tools are the means through which you will win the battle of woodworking. Many men and women believe power tools are needs. However, for beginners, basic hand tools can be very handy and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You might also buy keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed price on woodworking projects. Based on the sort of job you would like to finish, pricing can be determined. The simple the project, the less cost it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the project. Buying the basic tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Directions

Directions are among the primary things that every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the process, what to do and how to do it. It keyword is a systematic guide for finishing the job. Time also plays an important part in the construction of woodworking jobs. Woodworking projects require time and so it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most essential thing keyword that can allow you to reach success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you know the objective of woodworking, then the item you need to construct, the tools you require to possess and the typical time you can devote daily; then you are all set to go.

Conclusion, Storage Shed Plans

All these tips and instruction is likely to create the woodworking projects and plans for beginners fast to finish. Always ensure that you have all the essential tools, materials, area ready. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can help you to make a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Storage Shed Plans

Folks if you’re trying to find a way to pass time or desire an alternative way to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you need to be very cautious when choosing which job to start out with because you will find jobs which may be too tough for a beginner. But do not be concerned about that because we will provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your project you need to be aware of if you’ve got the available tools to work on such a project. Try not to spend a good deal of cash on purchasing gear when starting out, buy more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

Starting Your First Woodworking Shop Storage Shed Plans

Woodworking in your home will give you time to research different jobs and learn so many things. That is why it’s very important to invest less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It’s extremely important that you know about the different kinds of wood available for creating projects. Expect carpenters utilize several types of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you will need for certain jobs you may want to pursue.
As soon as you understand the fundamentals of wood choice and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in building good projects to satisfy your needs.

Storage Shed Plans practice makes perfect so make sure you practice your work daily if at all possible. Try out lots of designs using a variety of tools so you may find the hang of using the tools. When starting out you can earn a range of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Storage Shed Plans

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimal number of tools and equipment. A little home workshop can generate a wide array of simple projects which can help you develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you will do your woodworking, based on the dimensions of your house, you might be able to create a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air yields found in the basement draw up dust into the upper levels of the house. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the household. A fantastic compromise might be the garage of your home.

This can help minimize the problems of dust and noise, however based on where you reside, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Storage Shed Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Storage Shed Plans if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you get more tools and equipment. In the start, establish a bench area where you are able to store and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. Add a sturdy shelf beneath the seat to home your hands power tools and a pegboard over the seat to hang other gear. Put in a woodworking at one end of the seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Storage Shed Plans

The reach of your start-up equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools at your regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other regional advertisements. You will find an abundance of quality gently used tools out there which belong to individuals who embarked on that 1 molding project around the house or received tools as gifts which they will never utilize. You can usually purchase tools for these sellers for under half the initial cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require extra time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple extra bucks on a cheap piece of gear. The extra expense of time and travel in these scenarios is generally justified when purchasing large ticket items such as table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimal amount of hand gear yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a listing of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect security. Avoid wearing gloves in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those noise levels may affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated noise levels. Select powerful hearing protection which you find comfortable and effective. These can contain earplugs or complete ear keyword muff protectors. I find a quality pair of ear muff guards is ideal for hearing protection.

Lastly, wear a cap to keep the dust from your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite name, this can prove to be the most versatile tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw could be used to construct an whole property. At some point, you are going to want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Stay away from cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next project. After choosing the right saw put in a quality blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade. All these have a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t just cut corners. It’s ideal for cutting holes in wood also like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch model. Down the road, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood grips with inferior joints between the handle and head. The mind typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited to rough framing jobs and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface area. As you embark on your first few projects you’ll discover that your palm sander with a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a typical number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally requires the novice woodworker a few years to collect a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you could spend. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of your seat is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the jaws without dull handle turning. The wood beamed surfaces on your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which won’t crush or damage lots of the different forests that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot range. Although in your store you may not use the tape at these lengths, the larger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Measuring when you are by yourself will be a great deal simpler, and of course, quality tape steps can endure for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Additionally, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes along the way.

Adhesives: Not all glues are made equal. Avoid inexpensive house brands marketed as carpenter’s glue. The cost of glue through all of your projects is a little cost consideration. For that reason, it makes sense to go with the best. I also have found over time that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Storage Shed Plans

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Shed

A shed is typically a simple, single-story roofed structure in a back garden or on an allotment that is used for storage, hobbies, or as a workshop. Sheds vary considerably in the complexity of their construction and their size, from small open-sided tin-roofed structures to large wood-framed sheds with shingled roofs, windows, and electrical outlets. Sheds used on farms or in industry can be large structures. The main types of shed construction are metal sheathing over a metal frame, plastic sheathing and frame, all-wood construction (the roof may be asphalt shingled or sheathed in tin), and vinyl-sided sheds built over a wooden frame.

A culture of shed enthusiasts exists in several countries for people who enjoy building sheds and spending time in them for relaxation. In Australia and New Zealand there are magazines called The Shed, an association for shed hobbyists (the Australian Men's Shed Association), and a book entitled Men and Sheds.

The simplest and least-expensive sheds are available in kit form. These kits are designed for regular people to be able to assemble themselves using commonly available tools (e.g., screwdriver). Both shed kits and DIY (do-it-yourself) plans are available for wooden and plastic sheds. Sheds are used to store home and garden tools and equipment such as lawn tractors, and gardening supplies. In addition, sheds can be used to store items that are not suitable for indoor storage, such as petrol (gasoline), pesticides, or herbicides. For homes with small gardens or modest storage needs, there are several types of very small sheds. The sheds not only use less ground area but also have a low profile less likely to obstruct the view or clash with the landscaping.

Video: Woodworking Tools