Stuff To Make With Wood | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to start woodworking when they are following because all the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure if they should be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the ideal choice. There are in fact many things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the thoughts and jobs in Ted’s bundle quite easy. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any job of their choice in this package quite easily, even though there so many options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every conceivable way he could, through easy to comprehend textual instructions, clear images and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it is certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Stuff To Make With Wood

Woodworking is 1 hobby that could also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Stuff To Make With Wood.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will be able to build some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living room. It will be a topic of conversation whenever you have friends come over to see. They will ask: How did you make it? Where did you get the woodworking plans? How long can it take to complete the job? What type of wood did you use? What kind of tools did you use? Just how on earth did you create such a gorgeous piece of furniture? As you speak about your work, a sense of pride will come over you and don’t be surprised if your friends ask you to create one for them too!

The Benefits of Woodworking Stuff To Make With Wood

If you are thinking you are too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Stuff To Make With Wood.

Begin with a concept in your mind of what you want to construct and then get a really good woodworking project plan that is geared toward novices. There are several small woodworking projects for beginners available for sale from online woodworking retailers. Obviously, you can start out with as grand a woodworking plan as you pick. However, the odds are if you begin using a little woodworking project at first, you will get a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The beginner needs good woodworking gear, but it is simple to break the bank buying a lot of tools you may not use all that often. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the moment.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood glue! Obviously, you’ll need a dry area to work and might require a pair of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools which beginners will need. You can always increase your toolbox as you gain experience!

Stuff To Make With Wood Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those several woodworking magazines available. Every month the writers in woodworking magazines do a story on the best way to improve your woodworking craft. Whether it’s showing you how to apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Stuff To Make With Wood

If you are a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be interesting. If you do not have the proper information, instruction, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having said, there are a couple of essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your hands is a particular feeling. Do not begin a job if you are not interested, because this might land you in a bad place.

2. Consider the primary reason for making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start projects that you’re able to finish. If you’re in the middle of some work, then it’s wise to not start any project in any way.

Finding Woodworking Projects and Plans for Beginners Stuff To Make With Wood

If you maintain these vital things in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects you wish to start with. As a newcomer, always select a job which has quite a basic construct up or a simple construction. A few easy to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Stuff To Make With Wood

Tools are the means whereby you will win the battle of woodworking. Many men and women think that power tools are needs. However, for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and dimensions. The workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make things considerably simple for you. When you purchase a hammer, always check the equilibrium between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you ahead of time woodworking. You can also purchase keyword power screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking projects. Dependent on the sort of job that you want to finish, pricing can be set. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it’s better to fix a budget on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you do not need to buy any more material aside from the wood ply.

Time and Directions

Instructions are one of the principal things which each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is very easy to comprehend the process, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also has an important role in the building of woodworking projects. Woodworking projects require time and therefore it’s necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that can help you to reach success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you understand the objective of woodworking, then the item you want to construct, the tools you need in order to own and the typical time you can give daily; then you’re ready to go.

Conclusion, Stuff To Make With Wood

These tips and education is likely to make the woodworking projects and plans for novices fast to complete. Always ensure that you have all the essential tools, materials, area prepared. Read the instructions for constructing a product handy. Appropriate strategy and planning can help you to make a great woodworking project for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Stuff To Make With Wood

People if you’re looking for a way to pass time or desire an alternate method to generate money they usually turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based business. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you need to be quite careful when choosing which job to begin with since there are jobs that can be too difficult for a beginner. But do not worry about that since we will give you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your project you have to be aware of if you have the available resources to work on that project. Try not to spend a good deal of cash on buying equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Stuff To Make With Wood

Woodworking in your home will provide you time to explore different jobs and find out a lot of things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important you know more about the different types of wood available for making jobs. Anticipate carpenters utilize different types of wood quality for decorating bits, learning which type of wood that they use will allow you to prepare the wood you will need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in creating good jobs to satisfy your needs.

Stuff To Make With Wood practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts utilizing a variety of tools so you can find the hang of working with the tools. When starting out you can make a number of errors but with time you will learn how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Stuff To Make With Wood

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a wide array of simple projects that will help you develop your creative and construction abilities while rewarding you with artistic and practical wood products that you can enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s discuss where you will perform your woodworking, Depending on the dimensions of your house, you might be able to create a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be ideal to set up your first store. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. You can work without disturbing the rest of the household. A good compromise could be the garage of your home.

This can help minimize the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Stuff To Make With Wood

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes they include more space to function in. Stuff To Make With Wood if you can have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can remain in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the beginning, set up a bench area where you can shop and use the majority of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf below the bench to home your hands power tools and a pegboard above the bench to hang additional equipment. Put in a woodworking at one end of your bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Stuff To Make With Wood

The scope of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools in your regional building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality lightly used programs out there that belong to people who stumbled on that one molding job around the house or obtained tools as presents which they will never utilize. You can usually purchase tools for all these sellers for under half the initial cost and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private people will require additional time and perhaps travel expenses. Weigh the benefits of traveling around town to save a few extra bucks on a inexpensive piece of gear. The extra cost of travel and time in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand gear yet generated sophisticated and intricate bits. Concentrate on developing your skills with your startup set of tools and prevent lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Purchase a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and affect safety. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to high noise levels. Select effective hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this can prove to be the most flexible instrument in a startup workshop. In reality, at the hands of a professional, a power hand saw could be used to build an entire house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, rip cuts and even intricate angle cuts. As mentioned before get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second job. After choosing the right saw install a quality blade. Most skill saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a backup and install a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut curves. It is perfect for cutting holes in wood too like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw can be a good stop gap to the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged often. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is one annoyance you don’t want in your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Even though the most ordinary, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely update to a floor model disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll discover that your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get that this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure is still the same. Get a set of the maximum clamps which you can afford. You can contact them for smaller glue jobs and expand them to their full length for larger projects.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enabled the user to quickly open and close the jaws without dull handle turning. The timber beamed surfaces on your vice will occasionally need replacement. I would rather use soft walnut in my vices that will not crush or damage lots of the various forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of the most often used tools. Buy a fantastic excellent name brand tape measure with a wide tape typically in the 25-foot selection. Although in your store you may not use the tape in these spans, the bigger tape measures offer more rigid tapes that won’t flop around and slip off the end of planks. Assessing when you’re by yourself will be a lot simpler, and of course, quality tape measures can last for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The cost of adhesive through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I also have found over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Stuff To Make With Wood

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Stuffed toy

A stuffed toy is a toy with an outer fabric sewn from a textile and stuffed with flexible material. In North American English, the toys are variously referred to by many names, such as plush toys, stuffed animals, plushies, stuffies, or snuggled animals.[citation needed] In British English, they are called soft toys or cuddly toys. Textiles commonly used for the outer fabric include plain cloth, as well as pile textiles like plush or terrycloth, or even socks. Common stuffing materials include synthetic fiber batting, cotton, straw, wood wool, plastic pellets, and beans.

The toys developed in their current form in the early years of the 20th century and have remained consistently popular with children throughout. Different fads have caused specific toys to surge in popularity among adults and collectors; noticeable examples include Tickle Me Elmo (1996) and Beanie Babies (1993–)[1] Stuffed toys are made in many different forms, but most often resemble real animals (sometimes with exaggerated proportions or features), legendary creatures, cartoon characters, or inanimate objects. They can be used as comfort objects; for display or collecting; or given as gifts, such as for graduation, illness, condolences, Valentine's Day, Christmas, or birthdays. They are commonly gifted to children, but can be given to anybody.

The first commercial concern to create stuffed toys was the German Steiff company in 1880. Steiff used newly developed technology for manufacturing upholstery to make their stuffed toys.[2] In 1892, the Ithaca Kitty became one of the first mass-produced stuffed animal toys in the United States.[3]

Video: Woodworking Tools