Summer Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable thoughts and projects.

The package has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an educator and a member of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because all the thoughts and jobs Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive bundle, and he ended up creating a truly’complete’ woodworking source.

Many might still appear unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. Those that are just getting started will discover the ideas and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s simple step by step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to locate any job of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and people who buy it will be backed by a 60-day warranty, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking packages that are available throughout the net. Ted has done his best to direct them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even videos as well.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more woodworking hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Summer Woodworking Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are several areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the authors in woodworking magazines do a story about the best way to increase your woodworking craft. When it’s showing you the way you can apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Summer Woodworking Projects

If you’re a beginner and very enthusiastic about doing a DIY job for home afterward, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you may wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having said, there are a few essential aspects you should remember, before starting with any woodworking project.

1. If you’re a beginner, you must first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t start a project if you’re not interested, because this might land you at a terrible location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a job.

4. Start jobs that you can complete. If you’re in the midst of a work, then it’s wise not to start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Summer Woodworking Projects

If you maintain these essential things in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking jobs that you want to begin with. As a newcomer, always select a job that has a very basic build up or a simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Summer Woodworking Projects

Tools are the means whereby you will win the battle of woodworking. Many men and women think that power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for precise cuts and dimensions. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are different types of saws out there on the marketplace. Choose a size which you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might even buy keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you at a subsequent stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills will make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is no fixed price on woodworking jobs. Dependent on the sort of project you want to finish, pricing can be determined. The simple the job, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Therefore, it’s better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you don’t have to buy any more material other than the timber ply.

Time and Directions

Instructions are one of the primary things that every beginner should follow. Instructions manual is very easy to understand the procedure, what to do and how to get it done. Time also plays an important role in the building of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or suggestions that would make the work easy. But the most essential thing keyword that can allow you to achieve success is proper preparation. With proper planning and a strategy, it is possible to achieve success immediately. If you know the objective of woodworking, the thing you want to construct, the tools you need in order to own and the typical time it’s possible to give daily; then you’re all set to go.

Conclusion, Summer Woodworking Projects

These strategies and education is likely to make the woodworking projects and plans for beginners quickly to complete. Always ensure that you have all of the vital tools, materials, space prepared. Keep the instructions for constructing an item handy. Appropriate strategy and preparation can allow you to earn a fantastic woodworking job for your home.

|

The Benefits of Woodworking Summer Woodworking Projects

Folks when trying to find a way to pass time or desire an alternative method to make money they usually turn to a hobby that they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be quite cautious when choosing which project to begin with since there are projects which may be too tough for a newbie. But don’t be concerned about that since we are going to provide you guidelines on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your project you need to be aware of if you’ve got the available tools to work on that project. Try not to invest a good deal of money on buying equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

Finding Woodworking Projects and Plans for Beginners Summer Woodworking Projects

Woodworking at home will give you time to explore unique jobs and learn a lot of things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at any time learning about different projects.
It’s extremely important you know about different types of wood available for creating projects. Anticipate carpenters use several kinds of wood quality for decorating bits, learning what type of wood that they use can allow you to prepare the wood you’ll need for certain jobs you may want to pursue.
Once you know the fundamentals of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good projects to fulfill your wants.

Summer Woodworking Projects practice makes perfect so be sure you practice your work every day if possible. Try out lots of designs using various tools so you can get the hang of working with the tools. When starting out you can earn a range of errors but with time you will learn how to properly utilize them and produce quality projects.

|

The Benefits of Woodworking Summer Woodworking Projects

Woodworking as a hobby can be among the most rewarding experiences you will ever enjoy. You may begin on a shoestring with a minimal number of gear and equipment. A small home workshop can produce a broad variety of simple projects that can help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us discuss where you’ll perform your woodworking, based on the size of your home, you may have the ability to create a dedicated space to your woodworking activities. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding may be ideal to set up your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the basement draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. You can work without disturbing the remainder of the family. A fantastic compromise could be the garage of your home.

This might help decrease the problems of dust and sound, however depending on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Summer Woodworking Projects

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Summer Woodworking Projects if you can have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in place from project to project. If this installation is not impossible, at least try to make a chair area where equipment could be stored and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the beginning, establish a seat area where you can shop and use most of your equipment, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the seat to home your hands power tools along with a pegboard over the bench to hang other equipment. Put in a woodworking at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Summer Woodworking Projects

The scope of your startup equipment will be mostly based on your budget. Whether you have got big financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, then purchase your quality tools at the local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used tools out there that belong to individuals who embarked on that 1 molding job around the house or obtained tools as presents that they will never use. You can usually purchase tools for these sellers for under half the initial cost and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will require extra time and possibly travel expenditures. Weigh the advantages of traveling around town to save a few added bucks on a cheap piece of gear. The extra expense of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair eyesight and dust up fast. You may avoid wearing them all together if you find them uneasy.

The next piece of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular brand name, this can prove to be the most flexible tool in a startup workshop. In fact, at the hands of a professional, a power hand saw could be employed to construct an entire house. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second project. After selecting the right saw put in a quality blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a copy and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will include great versatility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut curves. It is perfect for cutting holes in timber too like manage slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit can be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch toss within the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not want in your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill piece to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using just a bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets using an extra supply of 100 grit paper. You’ll get this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally takes the beginner woodworker a couple of years to collect a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you can afford. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the consumer to quickly open and close the limbs without dull handle turning. The timber clamping surfaces on your vice will periodically need replacement. I would rather utilize soft pine in my vices that will not crush or damage lots of the various forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape usually in the 25-foot range. Although in your shop you may not use the tape at these spans, the bigger tape measures provide more rigid tapes that will not flop around and slip off the ending of planks. Measuring when you’re by yourself will be a lot easier, and naturally, quality tape measures can endure for many decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of glue through all your jobs is a minor cost consideration. For that reason, it is sensible to decide on the best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Summer Woodworking Projects

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved livelihood. With a minimum investment in the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Sloyd

Sloyd (Slöjd), also known as Educational sloyd, is a system of handicraft-based education started by Uno Cygnaeus in Finland in 1865. The system was further refined and promoted worldwide, and was taught in the United States until the early 20th Century. It is still taught as a compulsory subject in Finnish, Danish, Swedish and Norwegian schools.

The word "sloyd" is derived from the Swedish word Slöjd, which translates as crafts, handicraft, or handiwork. It refers primarily to woodwork but also paper-folding and sewing, embroidery, knitting and crochet.

Otto Salomon, with the financial support of his uncle, started a school for teachers in Nääs (now a part of the Swedish municipality of Lerum) in the 1870s.[1] The school attracted students from throughout the world and was active until around 1960.

Video: Woodworking Projects