Table Saw Projects Free Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities along with a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are after because most of the thoughts and projects Ted’s resource are easy to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still seem unsure whether they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. Those that are just getting started will find the thoughts and jobs in Ted’s package quite easy. No doubt, intricate carpentry is involved; however, they will find it really easy to follow Ted’s easy step by step instructions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource which will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice within this bundle quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and those who purchase it’ll be endorsed by a 60-day warranty, so when this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering the fact that this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his very best to guide them in every possible way he can, through simple to comprehend textual instructions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. So, it’s certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which beginners will need. You may always increase your arsenal as you get experience!

Table Saw Projects Free Plans Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. However, if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking magazines do a story on the best way best to increase your woodworking craft. Whether it’s showing you the way to apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Table Saw Projects Free Plans

If you’re just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be interesting. If you do not have the right information, education, and ability, you might wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a few essential factors you need to keep in mind, before beginning with any woodworking project.

1. If you’re a beginner, you must first need to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Don’t begin a project if you’re not interested, as this may land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of this thing you are making.

3. Consider your abilities and analyze the time that you have, before you begin with a project.

4. Start jobs that you’re able to finish. If you’re in the midst of some work, then it is wise not to start any project in any way.

The Benefits of Woodworking Table Saw Projects Free Plans

If you maintain these vital things in your mind before you begin a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to choose the woodworking projects that you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a simple construction. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always proceed into the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their resources. Once the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Table Saw Projects Free Plans

Tools would be the ways whereby you can win the battle of woodworking. Many people think that power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always pick a hardy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can even buy keyword power screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for novices, but having it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much easy.

8. Other small and fundamental tools – These include pencils, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed price on woodworking projects. Based on the sort of job you want to finish, pricing could be set. The easy the job, the less cost it involves. But at the beginning buying the tools will probably be a little hefty. Therefore, it is much better to resolve a budget on the tools, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to purchase any more material other than the wood ply.

Time and Directions

Directions are one of the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions manual is very easy to comprehend the procedure, what to do and the way to get it done. It keyword is a systematic guide for finishing the project. Time also plays a significant role in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, then the thing you need to construct, the tools you need in order to own and the average time it’s possible to devote every day; then you are all set to go.

Conclusion, Table Saw Projects Free Plans

All these tips and education is likely to make the woodworking projects and strategies for beginners fast to complete. Always ensure you have all of the essential tools, materials, space prepared. Read the instructions for building a product handy. Appropriate strategy and planning will allow you to make a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Table Saw Projects Free Plans

Folks when trying to find a way to pass time or want an alternate method to generate money they usually turn to a hobby they enjoy. It’s very exciting to do and anyone can get started.

When doing woodworking at home there are a lot of projects one can think of. When starting out you need to be very cautious when choosing which project to begin with since there are projects that can be too tough for a newbie. But don’t worry about that since we will give you tips on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your project you need to be aware of whether you have the available tools to work on such a job. Try not to invest a good deal of money on purchasing gear when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any gap between the hand as well as the hands.

Starting Your First Woodworking Shop Table Saw Projects Free Plans

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to explore unique projects and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make errors and at any time learning about different projects.
It’s very important that you know more about different types of wood available for making projects. Anticipate carpenters use different kinds of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to satisfy your wants.

Table Saw Projects Free Plans practice makes perfect so make sure you practice your work daily if possible. Try out lots of layouts using a variety of tools so you may find the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

Finding Woodworking Projects and Plans for Beginners Table Saw Projects Free Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of tools and equipment. A little home workshop can generate a broad variety of simple projects that can help you develop your creative and construction abilities while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will perform your woodworking, based on the dimensions of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control methods, basement assignments will inevitably create dust that travels to the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the upper levels of the house. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the rest of the family. A good compromise might be the garage of your property.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Table Saw Projects Free Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Table Saw Projects Free Plans if you can have a dedicated place for a marathon all the greater. Floor tools and bench top gear can stay in place from project to project. If this setup isn’t hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the start, set up a seat area where you are able to shop and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. Add a sturdy shelf below the seat to home your hands power tools and a pegboard over the bench to hang additional equipment. Install a woodworking vice at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Table Saw Projects Free Plans

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, then purchase your quality tools in the regional construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other regional ads. There are an abundance of quality gently used programs out there which belong to people who stumbled on that one molding job around the home or received tools as presents which they will never utilize. You can usually buy tools for these sellers for under half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenses. Weigh out the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum quantity of hand gear yet produced sophisticated and intricate pieces. Focus on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels can affect hearing and result in tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this can end up being the most versatile tool in a startup workshop. In reality, in the hands of a professional, a power hand saw can be employed to construct an whole house. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your second project. After choosing the proper saw put in an excellent blade. Most skill saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut curves. It’s perfect for cutting holes in wood also like manage slots. Eventually, you’ll want to get a band saw. Bandsaws are much more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want in your workshop. Buy an range of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning every drill piece to its prospective slot in the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you will likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might find your palm sander with just a bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, good clamps are costly and it usually takes the beginner woodworker a couple of years to accumulate a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure is still the same. Get a set of the longest clamps that you could afford. You can contact them for smaller glue jobs and enlarge them to their full length for bigger projects.

Shop Vice: A shop vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws without dull handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I would rather utilize soft walnut in my vices which won’t crush or damage many of the different forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure will be among the most often used tools. Purchase a good quality name brand tape measure with a wide tape usually in the 25-foot selection. Even though in your shop you might not use the tape in these lengths, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the ending of planks. Measuring when you are on your own will be a lot easier, and naturally, quality tape measures can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles as well as compound angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The cost of glue through all of your jobs is a minor cost consideration. For that reason, it is sensible to go with the best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Table Saw Projects Free Plans

The peaceful gratification of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of Saw characters

The Saw series of horror films features a large cast of characters created primarily by directors and screenwriters James Wan, Leigh Whannell, Darren Lynn Bousman, Patrick Melton, and Marcus Dunstan. The series focuses on the character of John Kramer (Tobin Bell), the "Jigsaw Killer", who seeks out those he considers to be wasting their lives and subjects them to torturous and lethal traps, referred to as "tests" and "games", in an attempt to make them appreciate living. The series comprises eight films: Saw (2004), Saw II (2005), Saw III (2006), Saw IV (2007), Saw V (2008), Saw VI (2009), Saw 3D (2010), and Jigsaw (2017).

Adam was a freelance photographer hired by the discharged detective David Tapp to follow Dr. Lawrence Gordon, the man he suspected of being the Jigsaw Killer. Adam was kidnapped by Jigsaw's apprentice Amanda Young and placed in a game alongside Dr. Gordon, which took place in a large dilapidated bathroom. Each of them were chained to pipes on opposite sides of the room and given specific instructions on what they needed to do in order to survive. Dr. Gordon had to kill Adam by six o'clock, while Adam simply had to escape. After failing to complete their respective tasks by the deadline they were confronted by Zep Hindle, an orderly from Dr. Gordon hospital. Adam beats Zep to death with a toilet tank lid, believing he is responsible for their abduction, and Dr. Gordon crawls away to get help, having sawed off his foot. While searching Zep's body for a key Adam finds a tape recorder which reveals that Zep was only following instructions in order to obtain an antidote for a poison in his blood stream. As the tape ends the real Jigsaw reveals himself, and seals the bathroom door, leaving Adam in the bathroom to die. Adam was later shown to have been killed out of guilt by Amanda Young in Saw III shortly after the end of the first Saw film, by suffocating him with a plastic bag.

Adam's decomposing corpse is seen in Saw II, Saw III, and Saw 3D, the latter two also show him in flashbacks. In Saw II: Flesh & Blood Adam is mentioned in Tapp's files and audio tapes as having been hired by one of Tapp's colleagues to prove his wife was having an affair, implying this was why Tapp hired him.

Video: Woodworking Tools