Teds Woodworking Package | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re after because most of the thoughts and projects Ted’s source are easy to understand and simple. Ted McGrath spent two years researching so he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are actually lots of things that set Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They will also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to find any project of their choice within this bundle quite easily, though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this item is and those who buy it will be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they did not mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that are available throughout the net. Ted has done his best to guide them in every conceivable way he can, through easy to understand textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is certainly worth buying!

Finding Woodworking Projects and Plans for Beginners Teds Woodworking Package

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a nice woodworking craftsman, you will have the ability to build all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Teds Woodworking Package.

It takes time to become proficient in the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will have the ability to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation when you have friends come over to visit. They’ll ask: How did you make it? Just how long did it take to finish the job? What type of wood did you use? What kind of tools did you use? How on earth did you make such a beautiful item of furniture? As you discuss your work, a feeling of pride will come over you and do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Teds Woodworking Package

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to begin in Woodworking? Teds Woodworking Package.

Start with an idea in mind of what you want to build and then get a really good woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. A couple of woodworking plan suggestions for you believing are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to mention a few. Of course, you can start out with as expansive a woodworking program as you choose. On the other hand, the odds are if you begin using a small woodworking project at first, you will get a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of warning about purchasing woodworking tools. Just buy what you want to complete your instant or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not affordable. The beginner needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a seat plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry area to work and may need a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that novices will need. You can always add to your arsenal as you get experience!

Teds Woodworking Package Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you’re not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Each month the authors in woodworking magazines do a story on how to increase your woodworking craft. Whether it is showing you how you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Teds Woodworking Package

If you are a beginner and very interested in doing a DIY project for house then, woodworking could be fun. If you don’t have the right information, instruction, and ability, you may wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you are a beginner, you should first have to be somewhat interested in woodworking. Making something new with your hands is a particular feeling. Do not start a project if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and examine the time you have, until you begin with a job.

4. Start projects that you’re able to complete. If you are in the middle of a work, then it is wise to not begin any project in any way.

The Benefits of Woodworking Teds Woodworking Package

If you keep those vital points in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you want to start with. As a newcomer, always select a project which has a very basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you can always move into the next level of woodworking projects, like cupboards, sheds, and others. Beginning projects should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their resources. Once the project is selected, begin selecting your tools.

Beginners Woodworking Tools, Teds Woodworking Package

Tools would be the ways through which you can win the struggle of woodworking. Many men and women think that power tools are requires. However, for novices, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, offer ample space to operate. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut woods at several sizes. There are various sorts of saws available in the marketplace. Decide on a size that you could deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers as they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it would make work easier for you at a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Based on the type of project you would like to finish, pricing can be set. The simple the job, the less price it involves. However, at the very beginning buying the tools will be a little hefty. Therefore, it’s much better to resolve a budget on the tools, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Directions

Directions are among the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions manual is very simple to comprehend the process, what to do and the way to get it done. It keyword is a systematic manual for finishing the job. Time also has an important role in the building of woodworking projects. Woodworking projects demand time and so it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that can allow you to reach success is proper preparation. With proper planning and a strategy, it is possible to achieve success immediately. If you know the purpose of woodworking, then the item that you want to construct, the resources you need in order to possess and the average time you can give every day; then you are ready to go.

Conclusion, Teds Woodworking Package

These tips and education will create the woodworking projects and plans for beginners quickly to finish. Always make sure you have all of the vital tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and preparation can help you to make a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Teds Woodworking Package

People if you’re trying to find a way to pass time or want an alternate way to generate money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies individuals turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of projects one can think of. When starting out you have to be quite cautious when choosing which project to begin with because there are jobs that can be too tough for a beginner. But do not worry about that since we are going to give you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working gear, so before you pick your job you need to know if you’ve got the available tools to work on such a project. Try not to invest a good deal of money on buying gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

Starting Your First Woodworking Shop Teds Woodworking Package

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking in your home will provide you time to explore different projects and learn so many things. That’s why it’s important to spend less money when starting out so that you can afford to make mistakes and at some time learning about various jobs.
It is extremely important you know about different kinds of wood available for making jobs. Expect carpenters use several kinds of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
Once you understand the basics of wood selection and the usage of different tools now you can employ them in cutting out well wood pieces and putting wood together. Knowing what to do can help you in creating good jobs to satisfy your needs.

Teds Woodworking Package practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts using various tools so that you may find the hang of using the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Teds Woodworking Package

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A small home workshop may generate a broad variety of simple projects that will allow you to develop your creative and building skills while rewarding you with artistic and practical wood products which you can appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the size of your house, you may be able to produce a dedicated space to your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to prepare your very first shop. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably create dust which travels to the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the upper levels of the home. Another advantage of detached workshops would be, of course, the noise level. It’s possible to work without bothering the remainder of the household. A good compromise might be the garage of your home.

This might help decrease the problems of dust and sound, however depending on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Teds Woodworking Package

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Teds Woodworking Package if you can have a dedicated place for a marathon all the better. Floor gear and bench top gear can remain in place from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you get more tools and equipment. At the beginning, set up a seat area where you can shop and use the majority of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf beneath the bench to house your hands power tools and a pegboard above the bench to hang other equipment. Put in a woodworking vice at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Teds Woodworking Package

The scope of your start-up equipment will be largely based on your budget. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools in your regional building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality lightly used tools out there that belong to individuals who stumbled on that 1 molding job around the house or obtained tools as presents which they won’t ever use. You can usually purchase tools for these sellers for less than half the original cost and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a couple added bucks on a cheap piece of gear. The excess cost of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. With this set up I am shielding my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the favorite brand name, this can end up being the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw could be employed to build an whole property. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your second job. After choosing the right saw install an excellent blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool cannot just cut curves. It’s perfect for cutting holes in timber too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through tough lessons learned, I have found that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life will be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need on your workshop. Purchase an range of quality carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill piece to its potential slot at the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop accidents happen. Even though the most frequent, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with inferior joints between the handle and head. The head typically comes loose and the instrument becomes useless. Select a name brand quality hammer at the 16-ounce range for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These kinds of hammers are more suited for rough framing jobs and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any trimming requirements that you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor model disk and belt sander. However, for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll find that your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this grade of paper the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in every workshop. |} Though low tech in theory, these tools enable you to taper borders, sew high stains and correct any imperfections in timber bits. {Begin with a standard number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A shop vice installed at the end of the bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the consumer to rapidly open and close the limbs without tedious handle rotation. The wood clamping surfaces on your vice will periodically need replacement. I would rather utilize soft pine in my vices that will not crush or damage lots of the different forests that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not be using the tape in these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slip off the end of boards. Measuring when you are on your own will be a lot easier, and naturally, quality tape steps can endure for many years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their large flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will assist you in marking the right angles as well as compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The cost of adhesive through all your projects is a minor cost consideration. Therefore, it makes sense to decide on the best. I also have found over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Teds Woodworking Package

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most basic tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

Branding iron

The history of branding is very much tied to the history of using animals as a commodity. The act of marking livestock with fire-heated marks to identify ownership begins in ancient times with the ancient Egyptians.[1] The process continued throughout the ages, with Romans using the process to brand slaves as well.[2]

In the English lexicon, the Germanic word "brand" originally meant anything hot or burning, such as a fire-brand, a burning stick. By the European Middle Ages it commonly identified the process of burning a mark into a stock animals with thick hides, such as cattle, so as to identify ownership under animus revertendi. In England, the rights of common including the common pasture system meant that cattle could be grazed on certain land with commoner's rights and the cattle were branded to show ownership, often with the commoner's or Lord of the manor's mark. The practice was widespread in most European nations with large cattle grazing regions, including Spain.

With colonialism, many cattle branding traditions and techniques were spread via the Spanish Empire to South America and to countries of the British Empire including the Americas, Australasia & South Africa where distinct sets of traditions and techniques developed respectively.

Video: Woodworking Projects