Things To Build In Woodshop | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are following because all the ideas and projects Ted’s source are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it more difficult to make the right option. There are actually many things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit from Ted’s woodworking Package. People who are only getting started will find the thoughts and projects in Ted’s bundle quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step-by-step directions. Currently, both beginner and seasoned ones are using Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers will be able to find any job of their choice within this bundle quite readily, though there so many options.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who buy it will be backed by a 60-day warranty, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large size. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering the fact that this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found throughout the internet. Ted has done his very best to guide them in every conceivable way he can, through easy to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and more woodworking power tools , but the concept is to purchase the essential hand and power tools which novices will need. You may always increase your arsenal as you gain experience!

Things To Build In Woodshop Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Every month the writers in woodworking magazines do a story on how to increase your woodworking craft. When it’s showing you how to apply a finish to a finished project, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Things To Build In Woodshop

If you’re just beginning and very enthusiastic about doing a DIY project for home afterward, woodworking can be interesting. If you don’t have the proper information, education, and skill, you might wind up spending more money and time than you originally intended to spend. As a novice woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to remember, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a particular sense. Do not begin a project if you’re not interested, as this may land you at a bad place.

2. Think of the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a project.

4. Start projects that you’re able to finish. If you’re in the midst of some work, then it is better not to start any project at all.

The Benefits of Woodworking Things To Build In Woodshop

If you maintain those vital points in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking projects that you want to begin with. As a newcomer, always pick a project that has a very basic construct up or a very simple structure. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. The moment you find the techniques, you could always move to the next level of woodworking jobs, like cabinets, sheds, and others. Beginning jobs should keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Things To Build In Woodshop

Tools would be the ways whereby you can win the struggle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably simple for you. When you purchase a hammer, constantly check the equilibrium between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there in the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You can also purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed cost on woodworking jobs. Based on the type of project you want to complete, pricing could be set. The easy the job, the less cost it involves. But at the beginning purchasing the tools will be a little hefty. Because of this, it’s better to fix a budget first on the resources, then keyword on the undertaking. Buying the basic tools will make certain you do not have to purchase any more material other than the timber ply.

Time and Directions

Directions are one of the principal things that every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite easy to comprehend the process, what to do and how to do it. It keyword is a systematic guide for finishing the job. Time also plays a significant role in the building of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most indispensable thing keyword which will allow you to achieve success is proper preparation. With appropriate planning and a strategy, it’s possible to achieve success quickly. If you know the objective of woodworking, then the item you want to construct, the tools you require to possess and the average time it’s possible to give daily; then you’re ready to go.

Conclusion, Things To Build In Woodshop

These tips and education is likely to create the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all of the vital tools, materials, area ready. Read the instructions for constructing a product handy. Proper strategy and planning can help you to make a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Things To Build In Woodshop

People when looking for a way to pass time or desire an alternative way to generate money they usually turn to a hobby that they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of jobs one can think of. When starting out you have to be very cautious when choosing which job to start out with because there are jobs which can be too tough for a beginner. But do not be concerned about that because we will give you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your job you need to be aware of whether you have the available resources to work on that job. Try not to spend a good deal of money on buying gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Things To Build In Woodshop

To keep yourself updated you must disseminate with different brands tools and forests. Woodworking at home will provide you time to research unique projects and learn a lot of things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about various projects.
It’s extremely important that you know more about different types of wood available for making projects. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you’ll need for certain projects you may choose to pursue.
Once you know the fundamentals of wood selection and the usage of different tools now you can implement them in cutting out well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your wants.

Things To Build In Woodshop practice makes perfect so be sure you practice your work daily if possible. Try out a lot of designs utilizing various tools so you may get the hang of working with the tools. When starting out you can make a range of errors but with time you will learn how to properly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Things To Build In Woodshop

Woodworking as a hobby can be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum amount of tools and equipment. A little home workshop may generate a broad variety of simple projects which can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you will perform your woodworking, based on the dimensions of your home, you may have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved place on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to set up your first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops is, of course, the sound level. It’s possible to work without bothering the rest of the household. A good compromise could be the garage of your property.

This might help minimize the difficulties of dust and sound, however depending on where you live, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

Finding Woodworking Projects and Plans for Beginners Things To Build In Woodshop

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they include more space to work in. Things To Build In Woodshop if you can have a dedicated place for a workshop all the greater. Floor gear and bench top equipment can remain in place from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be stored and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the beginning, set up a seat area where you are able to store and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf beneath the bench to home your hand power tools along with a pegboard above the seat to hang other gear. Put in a woodworking at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Things To Build In Woodshop

The reach of your start-up equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in the local building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. You will find plenty of quality gently used programs out there which belong to people who embarked on that 1 molding job around the home or obtained tools as presents that they won’t ever use. You can usually purchase tools for all these sellers for under half of the original price and save even more money should you create a bundle deal for all their unused equipment. Of course, acquiring tools from private people will require extra time and perhaps travel expenses. Weigh the advantages of traveling around town to save a couple extra bucks on a inexpensive piece of equipment. The excess expense of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers in the future.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum quantity of hand gear yet produced sophisticated and intricate bits. Focus on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a decent pair of safety glasses which also offer some side protection for your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to high noise levels. Last, put on a cap to keep the dust from your hair. I prefer a very simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw after the favorite brand name, this may end up being the most versatile instrument in a startup workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an whole property. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After selecting the proper saw put in a quality blade. Most saws come with a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and put in a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut corners. It is ideal for cutting holes in timber also like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the standard 3/8 inch version. Through tough lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to have very short run times and need to be recharged frequently. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want in your workshop. Purchase an range of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and a smaller completing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle pretty much any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll find this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Now the pipe was replaced with long steel shafts, but the structure remains the same. Get a set of the longest clamps that you can spend. You can get in touch with them for smaller glue jobs and enlarge them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer you rapid release mechanisms that enable the user to quickly open and close the jaws without dull handle rotation. The timber beamed surfaces in your vice will periodically require replacement. I prefer to utilize soft pine in my vices that will not crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among the most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot selection. Even though in your store you may not be using the tape at these lengths, the bigger tape steps offer more rigid tapes which will not flop around and slip off the ending of planks. Assessing when you’re by yourself will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other useful tools to round out your starter workshop: Buy a T-square, place square and speed square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Get the number two and three Robertson set. I discover the Robertson format works great for most woodworking jobs and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes on the way.

Adhesives: Not all glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The expense of glue through all your projects is a minor cost consideration. Therefore, it is sensible to go with the best. I have also discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Things To Build In Woodshop

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested avocation and revel in job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

The Shawshank Redemption

The Shawshank Redemption is a 1994 American drama film written and directed by Frank Darabont, based on the 1982 Stephen King novella Rita Hayworth and Shawshank Redemption. It tells the story of banker Andy Dufresne (Tim Robbins), who is sentenced to life in Shawshank State Penitentiary for the murder of his wife and her lover, despite his claims of innocence. Over the following two decades, he befriends a fellow prisoner, contraband smuggler Ellis "Red" Redding (Morgan Freeman), and becomes instrumental in a money laundering operation led by the prison warden Samuel Norton (Bob Gunton). William Sadler, Clancy Brown, Gil Bellows, and James Whitmore appear in supporting roles.

Darabont purchased the film rights to King's story in 1987, but development did not begin until five years later when he wrote the script over an eight-week period. Two weeks after submitting his script to Castle Rock Entertainment, Darabont secured a $25 million budget to produce The Shawshank Redemption, which started pre-production in January 1993. While the film is set in Maine, principal photography took place from June to August 1993 almost entirely in Mansfield, Ohio, with the Ohio State Reformatory serving as the eponymous penitentiary. The project attracted many stars of the time for the role of Andy, including Tom Hanks, Tom Cruise, and Kevin Costner. Thomas Newman provided the film's score.

While The Shawshank Redemption received positive reviews on its release, particularly for its story and the performances of Robbins and Freeman, it was a box office disappointment, earning only $16 million during its initial theatrical run. Many reasons were cited for its failure at the time, including competition from films such as Pulp Fiction and Forrest Gump, to the general unpopularity of prison films, lack of female characters, and even the title, which was considered to be confusing for audiences. Even so, it went on to receive multiple award nominations, including seven Academy Award nominations, and a theatrical re-release that, combined with international takings, increased the film's box office gross to $58.3 million.

Video: Woodworking Projects