Tools For Woodworking | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking when they’re following because most of the thoughts and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more difficult to make the right choice. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are only getting started will find the thoughts and projects in Ted’s package quite easy. Without doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s simple step by step instructions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this bundle quite easily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this product is and people who buy it will be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down because of its large size. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering the fact that this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s design package is so comprehensive and vast that it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the net. Ted has done his very best to guide them in every conceivable way he could, through simple to comprehend textual instructions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking jobs they will find within. So, it is definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Tools For Woodworking

Woodworking is one hobby that can also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from timber. When you learn that the woodworking crafts and become a nice woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking projects and make a handsome profit. Tools For Woodworking.

It requires time to become proficient in the craft of woodworking. The wonderful thing about working up to that expert craftsman level is you will have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living space. It will be a subject of conversation whenever you have friends come over to see. They will ask: How can you make it? How long can it take to finish the project? What type of wood did you use? What kind of tools did you use? How on earth did you create such a gorgeous item of furniture? As you discuss your work, a feeling of pride will come over you and don’t be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Tools For Woodworking

If you’re thinking you are just too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Tools For Woodworking.

Start with an idea in mind of what you want to construct and then get a excellent woodworking project plan that’s geared toward beginners. There are several little woodworking projects for beginners available for sale from online woodworking merchants. Of course, you can begin with as grand a woodworking program as you pick. On the other hand, the chances are if you start out using a little woodworking job initially, you will have a better prospect of keyword finishing the project.

Your woodworking project plan should include some lists! Lists of: woodworking equipment, the amount and variety of wood required, and the required hand tools and power tools to complete the project. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools aren’t affordable. The beginner needs good woodworking tools, but you can easily break the bank buying a lot of tools you might not utilize all that frequently. When you do buy tools, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you will require a dry place to work and may require a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that novices will need. You can always increase your toolbox as you get experience!

Tools For Woodworking Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. However, if you are unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of those several woodworking magazines out there. Each month the writers in woodworking publications do a story on the best way best to increase your woodworking craft. Whether it’s showing you the way you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard each month. Next, is buying instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Tools For Woodworking

If you are a beginner and very interested in doing a DIY project for house then, woodworking could be fun. If you do not have the proper information, education, and ability, you might land up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Do not begin a job if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason for creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start jobs that you’re able to complete. If you are in the midst of some work, then it’s wise to not begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Tools For Woodworking

If you keep those vital points in mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires planning as much because it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you wish to begin with. As a newcomer, always pick a job which has a very basic build up or a simple construction. Some simple to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always move into the next level of woodworking projects, such as cabinets, sheds, and others. Beginning jobs should keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Tools For Woodworking

Tools are the means through which you can win the battle of woodworking. A lot of people believe power tools are needs. But for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much simple for you. When you buy a hammer, constantly assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there in the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them will help you ahead of time woodworking. You can also purchase keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape gives you the capacity to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this is not a tool for beginners, but having it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Low wattage power drills will make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking projects. Dependent on the type of project you would like to finish, pricing could be determined. The simple the project, the less price it involves. However, at the very beginning purchasing the tools will be a little hefty. Because of this, it’s much better to fix a budget on the resources, then keyword on the undertaking. Buying the fundamental tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the primary things that every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to comprehend the process, what to do and the way to do it. It keyword is a systematic manual for finishing the project. Time also plays an important role in the building of woodworking projects. Woodworking projects require time and therefore it is crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which can help you to achieve success is proper planning. With appropriate planning and a strategy, it is likely to achieve success immediately. If you understand the objective of woodworking, the item you want to construct, the tools you require in order to own and the average time it’s possible to devote every day; then you are ready to go.

Conclusion, Tools For Woodworking

All these tips and education is likely to make the woodworking projects and plans for novices quickly to complete. Always ensure that you have all the essential tools, materials, area ready. Read the instructions for building a product handy. Proper strategy and preparation can help you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Tools For Woodworking

People when looking for a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be quite careful when choosing which project to begin with since you will find projects that can be too difficult for a beginner. But don’t worry about that since we are going to provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking requires some working equipment, therefore before you pick your project you need to know whether you have the available resources to work on that project. Try not to invest a lot of cash on buying equipment when starting out, purchase more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the artistic hand and the hands.

The Benefits of Woodworking Tools For Woodworking

To keep yourself updated you must disseminate with various brands tools and woods. Woodworking in your home will provide you time to explore different jobs and find out so many things. That is why it’s important to spend less money when starting out so you can afford to make mistakes and at some time learning about different projects.
It is very important you know about the different types of wood available for creating jobs. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning which type of wood that they use can help you prepare the wood you’ll need for certain jobs you might choose to pursue.
As soon as you know the basics of wood choice and the usage of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to fulfill your wants.

Tools For Woodworking practice makes perfect so make sure that you practice your work every day if possible. Try out lots of designs using various tools so you may find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Tools For Woodworking

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A little home workshop can produce a broad array of simple projects which can allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll do your woodworking, based on the size of your house, you might have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved spot in your garage or on your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your very first shop. A heated store detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the family. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout may not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Tools For Woodworking

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Tools For Woodworking if you’re able to have a dedicated spot for a marathon all the greater. Floor gear and bench top equipment can remain in position from project to project. If this installation is not impossible, at least attempt to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a bench area where you can store and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to home your hands power tools along with a pegboard over the seat to hang additional gear. Put in a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Tools For Woodworking

The scope of your start-up equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, purchase your quality tools in the regional construction and hardware centre. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. You will find an abundance of quality gently used programs out there which belong to people who embarked on that 1 molding job around the house or received tools as presents that they won’t ever use. You can usually buy tools for all these sellers for less than half the original price and save even more money if you create a package deal for all their unused equipment. Obviously, getting tools from private people will require additional time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple extra bucks on a cheap piece of gear. The excess expense of time and travel in these scenarios is usually justified when purchasing large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand gear yet produced sophisticated and complex bits. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the equipment you wished you had.
Here is a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of crucial safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite brand name, this can prove to be the most versatile tool in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to build an entire house. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut back and will burn out before you even start your next project. After selecting the right saw install a quality blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced tooth count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It’s ideal for cutting holes in timber also like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Through hard lessons learned, I have discovered that buying quality, in this case, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t want on your workshop. Buy an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer remains as the most versatile tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The head typically comes loose and the tool becomes useless. Select a title brand quality hammer in the 16-ounce range for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage just about any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are essential in each workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in wood bits. {Start with a standard amount 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it usually requires the novice woodworker a few years to accumulate a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps which you could afford. You may get in touch with them for smaller glue jobs and expand them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the better vices offer you quick release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle rotation. The wood beamed surfaces in your vice will occasionally require replacement. I prefer to use soft walnut in my vices which won’t crush or damage many of the different forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Buy a good quality name brand tape measure with a wide tape typically in the 25-foot range. Even though in your shop you may not use the tape at these spans, the larger tape steps provide more rigid tapes that will not flop around and slide off the end of boards. Assessing when you are by yourself will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a few other useful tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools will help you in marking the ideal angles as well as compound angles. Get the number two and three Robertson set. I discover that the Robertson format works great for many woodworking jobs and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and repairing small mistakes along the way.

Adhesives: Not many glues are made equal. Avoid inexpensive house brands marketed as carpenter’s glue. The expense of adhesive through all your projects is a minor cost consideration. For that reason, it is sensible to decide on the best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Tools For Woodworking

The peaceful gratification of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of tool manufacturers

Video: Woodworking Tools