Types Of Carpentry | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because all the thoughts and projects Ted’s resource are simple to understand and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more challenging to make the right option. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those that are only getting started will find the ideas and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step-by-step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers will have the ability to locate any job of their choice within this bundle quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it will be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Nonetheless, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking package made by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that can be found across the net. Ted has done his best to direct them in every conceivable way he could, through easy to understand textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Types Of Carpentry

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you’ll be able to build all kinds of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Types Of Carpentry.

It requires time to become proficient at the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll have the ability to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit in your living room. It will be a subject of conversation when you have friends come over to see. They will ask: How can you make it? Where did you get the woodworking programs? Just how long did it take to finish the project? What type of wood did you use? What type of tools did you use? How on earth did you create such a beautiful piece of furniture? As you discuss your work, a feeling of pride will encounter you and do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Types Of Carpentry

If you are thinking you are too old or too young for woodworking, then think again! You’re never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Types Of Carpentry.

Begin with an idea in your mind of what you want to construct then get a really good woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for novices available for purchase from online woodworking retailers. Obviously, you can start out with as grand a woodworking program as you pick. However, the chances are if you begin with a little woodworking project at first, you’ll get a better chance of keyword completing the job.

Your woodworking project plan must incorporate some lists! Lists of: woodworking hardware, the amount and variety of wood needed, and the essential hand tools and power tools to finish the project. Note: A word of caution about buying woodworking tools. Just buy what you need to finish your instant or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not utilize all that often. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking clamps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll need a dry area to work and may require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools that beginners will need. You may always increase your toolbox as you gain experience!

Types Of Carpentry Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Each month the writers in woodworking publications do a story on how best to improve your woodworking craft. Whether it is showing you the way you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Types Of Carpentry

If you are just beginning and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the proper information, instruction, and skill, you might wind up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a couple of essential aspects you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be somewhat interested in woodworking. Making something new with your hands is a special feeling. Do not begin a job if you’re not interested, because this might land you at a bad place.

2. Consider the main reason behind making this woodworking project. Decide on the uses of this item you are making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start jobs which you can finish. If you’re in the middle of some work, then it’s wise not to start any project in any way.

Starting Your First Woodworking Shop Types Of Carpentry

If you keep those essential things in your mind before beginning a woodworking project, it will become very easy for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a beginner, always select a project which has a very basic build up or a simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always move to the next level of woodworking jobs, like cupboards, sheds, and others. Beginning jobs should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Types Of Carpentry

Tools are the means through which you will win the struggle of woodworking. A lot of men and women think that power tools are needs. But for beginners, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, constantly check the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there in the market. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You can even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill makes it possible to create holes in timber. Low wattage power drills can make the job much easy.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is no fixed price on woodworking projects. Based on the type of job that you want to finish, pricing can be set. The simple the job, the less cost it involves. But at the beginning buying the tools will probably be a little hefty. Because of this, it is better to fix a budget on the tools, then keyword on the project. Purchasing the basic tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Instructions

Instructions are one of the principal things that every newcomer should follow. Instructions manual is very simple to understand the procedure, what to do and how to get it done. It keyword is a systematic manual for completing the project. Time also plays a significant part in the construction of woodworking jobs. Woodworking projects require time and therefore it is crucial for a novice to have ample amount of time weekly.

Tips and Tricks for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which will help you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, the thing that you need to construct, the tools you need to possess and the typical time you can devote daily; then you’re ready to go.

Conclusion, Types Of Carpentry

All these strategies and instruction is likely to create the woodworking projects and plans for novices quickly to complete. Always make sure that you have all the essential tools, materials, area prepared. Read the instructions for building an item handy. Proper strategy and preparation will allow you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Types Of Carpentry

Folks if you’re trying to find a way to pass time or desire an alternative way to generate money they generally turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very cautious when choosing which project to begin with because you will find projects which may be too tough for a newbie. But don’t worry about that since we are going to provide you tips on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you need to know whether you have the available resources to work on that project. Try not to spend a lot of cash on purchasing equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand and the normal hands.

Finding Woodworking Projects and Plans for Beginners Types Of Carpentry

To keep yourself updated you have to disseminate with different brands tools and woods. Woodworking at home will give you time to explore unique projects and find out so many things. That’s why it’s important to invest less money when starting out so that you can manage to make mistakes and at some time learning about different projects.
It is very important that you know about different kinds of wood available for making jobs. Expect carpenters use several types of wood quality for decorating pieces, learning which type of wood that they use can allow you to prepare the wood you will need for certain projects you might want to pursue.
Once you know the fundamentals of wood choice and the use of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to satisfy your wants.

Types Of Carpentry practice makes perfect so make sure that you practice your work daily if possible. Try out lots of layouts utilizing various tools so you can get the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Types Of Carpentry

Woodworking as a hobby may be one of the most rewarding experiences you will ever enjoy. You can begin on a shoestring with a minimum amount of tools and equipment. A small home workshop can produce a broad variety of simple projects which will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space to your woodworking tasks. This might be a reserved spot in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first shop. A heated store detached from your home offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns found in the basement draw dust up into the top levels of the home. Another benefit of detached workshops is, of course, the noise level. You can work without bothering the rest of the household. A good compromise might be the garage of your property.

This can help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of hot or cold weather.

Starting Your First Woodworking Shop Types Of Carpentry

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to function in. Types Of Carpentry if you’re able to have a dedicated spot for a workshop all the greater. Floor gear and bench top equipment can remain in position from project to project. If this setup is not hopeless, at least try to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the beginning, set up a seat area where you can shop and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. This will let you work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools along with a pegboard above the seat to hang other equipment. Install a woodworking vice at one end of your seat on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Types Of Carpentry

The scope of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used tools out there which belong to people who stumbled on that one molding job around the home or obtained tools as presents that they will never use. You can usually buy tools for all these sellers for less than half of the initial price and save even more money should you make a package deal for all their unused equipment. Obviously, getting tools from private people will take additional time and possibly travel expenses. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of gear. The extra expense of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you had.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety gear you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be long-term and noisy exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular name, this may prove to be the most flexible tool in a start-up workshop. In fact, in the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next job. After selecting the right saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade for a copy and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in timber also like manage slots. At some point, you’re going to want to get a band saw. Bandsaws are much more versatile but a excellent floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slide often. This is one annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the shop, and often the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, does not rust and comes with a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer in the 16-ounce range for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll discover that your palm sander with a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough planks with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood pieces. {Start with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to collect a detailed set of timber clamps. Start with a set of long”pipe” clamps. Now the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a set of the maximum clamps that you could afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A store vice installed at the end of the bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the user to rapidly open and close the limbs with no tedious handle rotation. The timber clamping surfaces on your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the different woods that I work with. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among the most frequently used tools. Buy a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you might not use the tape in these lengths, the larger tape steps provide more rigid tapes that won’t flop around and slide off the ending of planks. Measuring when you’re by yourself will be a great deal simpler, and of course, quality tape steps can last for several years.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber.

What is Woodworking? Woodwork Crafts – The Beginners Guide To Woodworking Types Of Carpentry

Woodworking is known as the building or the production of items out of wood. It is possible to create a great deal of different objects from woodworking and these items can be as large as gazebos or as little as wooden toys. No matter how large or small your personal project maybe you’ll be quite likely to do that goal with woodworking. In addition, woodworking has lots of private as well as emotional benefits! In the following guide, I will briefly identify some of these benefits for you.

Woodworking as a Career:

A lot of individuals who love to work with their hands have turned that love into a profession through woodworking. People who build things from wood are usually known keyword as carpenters. Carpenters can operate on a number of woodworking jobs and job types. For instance, some carpenters own their carpentry business and these folks have the luxury to set their job hours. This advantage allows carpenters the opportunity to spend more time with their families and have less job stress. Raising children is a really tough task regardless of what way you approach the task! To get a carpenter who owns his or her own business, this task might not be as hard because that individual will have more time to be a part of her or his child’s lifetime. By playing a larger part in the life of your child you’ll be having a larger impact on the sort of personality that kid develops into, which is a huge concern for any loving parent. In addition to such advantages, carpentry can also have health benefits too.

Woodwork Crafts – The Beginners Guide To Woodworking Types Of Carpentry

Physical Health Benefits of Woodworking:

Woodworking requires working with and carrying wood around a whole lot. This results in more physical activity, which results in better physical health. Keeping your body physically healthy is really important and keyword can assist in preventing the occurrence of various ailments in the foreseeable future life. By being physically healthy you can reduce chances that you will have a heart attack, have seizures, turned into a diabetic, and reduce the odds of having a number of other illnesses.

Types Of Carpentry, Do It Yourself Woodworking Saves Money:

I feel as that I paid way too far when I go to home improvement stores and buy patio furniture, and I am sure that I’m not the only person who has felt this way! A successful business owner once told me to constantly increase the sales price of a commodity to double what you’ve got it for. In this manner, you can always reduce the product to 50 percent off and come out without acquiring any losses. This seems like it might be exactly the exact same tactic that home improvement stores use in selling their wooden furniture solutions. Regardless, there’s a way that you can get around paying the extra cash and that has to do with building it yourself. Luckily, there are several really excellent woodworking products offering thousands of detailed woodworking keyword plans for hundreds of different job types. So, you can really build anything you need or see in any home improvement store. Doing something yourself does take a bit of time but time is well spent when you wind up saving hundreds of dollars as a result of your hard work.

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Carpentry

Carpentry is a skilled trade and a craft in which the primary work performed is the cutting, shaping and installation of building materials during the construction of buildings, ships, timber bridges, concrete formwork, etc. Carpenters traditionally worked with natural wood and did the rougher work such as framing, but today many other materials are also used[1] and sometimes the finer trades of cabinetmaking and furniture building are considered carpentry. In the United States, 98.5% of carpenters are male, and it was the fourth most male-dominated occupation in the country in 1999. In 2006 in the United States, there were about 1.5 million carpentry positions. Carpenters are usually the first tradesmen on a job and the last to leave.[2] Carpenters normally framed post-and-beam buildings until the end of the 19th century; now this old fashioned carpentry is called timber framing. Carpenters learn this trade by being employed through an apprenticeship training—normally 4 years—and qualify by successfully completing that country's competence test in places such as the United Kingdom, the United States, Australia and South Africa. It is also common that the skill can be learned by gaining work experience other than a formal training program, which may be the case in many places.

The word "carpenter" is the English rendering of the Old French word carpentier (later, charpentier) which is derived from the Latin carpentarius [artifex], "(maker) of a carriage.[3] The Middle English and Scots word (in the sense of "builder") was wright (from the Old English wryhta, cognate with work), which could be used in compound forms such as wheelwright or boatwright.[4]

In the UK, carpentry is more correctly used to describe the skill involved in first fixing of timber items, such as construction of roofs, floors and timber framed buildings, i.e., those areas of construction that are normally hidden in a finished building. An easy way to envisage this is that first fix work is all that is done before plastering takes place. Second fix is done after plastering takes place. Second fix work, the construction of items such as skirting boards, architraves, and doors also comes under carpentry. Carpentry is also used to construct the formwork into which concrete is poured during the building of structures such as roads and highway overpasses. In the UK, the skill of making timber formwork for poured, or in situ, concrete, is referred to as shuttering.

Video: Woodworking Tools