Unique Wood Crafts Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they’re following because most of the ideas and jobs Ted’s source are easy to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. People that are only getting started will find the ideas and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s simple step by step directions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will be able to locate any project of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who purchase it will be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this bundle is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that are available throughout the net. Ted has done his very best to direct them in every possible way he can, through simple to comprehend textual instructions, clear pictures and even movies as well.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more innovative hand tools and much more woodworking power tools here, but the idea is to buy the essential hand and power tools which novices will need. You can always increase your toolbox as you get experience!

Unique Wood Crafts Ideas Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you are unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the many woodworking magazines out there. Every month the writers in woodworking magazines do a story about how to improve your woodworking craft. When it is showing you the way to apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Unique Wood Crafts Ideas

If you’re just beginning and very enthusiastic about doing a DIY job for house then, woodworking could be fun. If you don’t have the right information, instruction, and ability, you might land up spending more time and money than you originally meant to spend. As a novice woodworker, you want to have time and the correct tools. Having mentioned, there are a couple of essential aspects you should remember, before starting with any woodworking project.

1. If you are a beginner, you must first need to be somewhat interested in woodworking. Creating something new with your hands is a special sense. Don’t begin a project if you are not interested, as this may land you at a bad location.

2. Think of the main reason for making this woodworking project. Choose the uses of this thing you are making.

3. Consider your skills and examine the time you have, before you start with a project.

4. Start jobs which you can complete. If you’re in the middle of some work, then it’s wise not to begin any project at all.

The Benefits of Woodworking Unique Wood Crafts Ideas

If you maintain those essential points in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much as it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to opt for the woodworking jobs that you wish to begin with. As a beginner, always pick a job that has a very basic construct up or a very simple construction. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always move into the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better knowledge of working with forests and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Unique Wood Crafts Ideas

Tools would be the ways through which you can win the battle of woodworking. Many men and women believe power tools are needs. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and endure. Always select a hardy, yet lightweight item.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available on the market. Decide on a size which you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You can even buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape gives you the capacity to quantify wood until they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pens, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking jobs. Dependent on the type of project that you want to complete, pricing can be set. The easy the job, the less price it involves. But at the very beginning buying the tools will be a little hefty. Therefore, it is better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to buy any more material aside from the timber ply.

Time and Instructions

Instructions are among the primary things which every newcomer should follow. It’s like the woodworking Bible. Instructions guide is very simple to understand the process, what to do and how to get it done. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and so it is crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword that can help you to achieve success is proper planning. With proper planning and a plan, it’s likely to achieve success immediately. If you know the objective of woodworking, then the thing you want to construct, the resources you need in order to own and the typical time you can devote every day; then you are ready to go.

Conclusion, Unique Wood Crafts Ideas

These tips and instruction is likely to create the woodworking projects and strategies for novices quickly to finish. Always ensure that you have all of the vital tools, materials, area ready. Read the instructions for building an item handy. Proper strategy and preparation will help you to earn a great woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Unique Wood Crafts Ideas

Folks if you’re trying to find a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of projects one can consider. When starting out you have to be quite cautious when choosing which job to start out with since you will find jobs which can be too difficult for a newbie. But don’t worry about that since we will give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, so before you choose your job you need to be aware of if you’ve got the available resources to work on that job. Try not to invest a good deal of cash on purchasing gear when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any gap between the hand as well as the normal hands.

How to Become a Master Woodworker From Your Own Home Unique Wood Crafts Ideas

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will provide you time to research different projects and find out so many things. That is why it’s important to invest less money when starting out so that you can afford to make errors and at any time learning about different projects.
It’s extremely important that you know more about different types of wood available for making projects. Expect carpenters utilize different types of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you’ll need for certain projects you might choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to fulfill your needs.

Unique Wood Crafts Ideas practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts using various tools so you may get the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Unique Wood Crafts Ideas

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimum amount of tools and equipment. A small home workshop may produce a wide array of simple projects which can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll do your woodworking, based on the size of your house, you may have the ability to create a dedicated space to your woodworking activities. This might be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated shop detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably produce dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air yields found in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the sound level. It’s possible to work without bothering the remainder of the family. A good compromise might be the garage of your property.

This can help minimize the difficulties of dust and noise, however depending on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Unique Wood Crafts Ideas

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Unique Wood Crafts Ideas if you can have a dedicated spot for a marathon all the better. Floor tools and bench top equipment can remain in position from project to project. If this setup is not impossible, at least attempt to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable expansion as you get more tools and equipment. In the start, set up a seat area where you can shop and use the majority of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang additional gear. Install a woodworking at one end of your bench on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Unique Wood Crafts Ideas

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got large financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. There are plenty of quality lightly used programs out there that belong to individuals who embarked on that one molding job around the home or obtained tools as presents which they will never utilize. You can usually purchase tools for these sellers for less than half of the original price and save even more money should you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and possibly travel expenses. Weigh out the advantages of traveling around town to save a couple extra dollars on a inexpensive piece of gear. The excess expense of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal quantity of hand gear yet generated sophisticated and intricate bits. Focus on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here’s a checklist of the more useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection to your eyes. Buy a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to high sound levels. Select effective hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust from your hair. I prefer a very simple ball cap with my ear muffs and eye protection. With this setup I am protecting my eyes and my ears. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the favorite name, this can prove to be the most flexible tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an entire house. At some point, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent manufacturer saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After choosing the right saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a copy and install a quality blade with carbide teeth. Start with a hybrid blade. All these have a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut curves. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to obtain a band saw. Bandsaws are even more flexible but a excellent floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill which runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch toss within the conventional 3/8 inch model. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you do not want on your workshop. Buy an range of quality carbide tipped drill bits which are kept in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range provide metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce scope for general work and a smaller completing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These types of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you’ll discover your palm sander using just a little bit of effort can change rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an range of sandpaper sheets with an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and fix any imperfections in wood bits. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, good clamps are costly and it normally requires the beginner woodworker a couple of years to collect a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, but the structure is still the same. Receive a set of the longest clamps which you could spend. You can contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A shop vice installed at the end of the seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer rapid release mechanisms that enabled the user to quickly open and close the jaws with no dull handle turning. The wood clamping surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices that will not crush or damage lots of the different forests that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape typically in the 25-foot range. Although in your shop you might not use the tape at these lengths, the bigger tape measures provide more rigid tapes that will not flop around and slide off the ending of boards. Measuring when you’re by yourself will be a lot easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I favor a sharp great old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will require extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of adhesive through all of your jobs is a minor cost consideration. For that reason, it makes sense to go with the best. I also have discovered over time that I receive the best results with both indoor and outdoor projects once I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and fail with moisture.

CONCLUSION, Unique Wood Crafts Ideas

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most basic tools and equipment, anyone can learn the rewarding skills of his time-tested hobby and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Mexican handcrafts and folk art

Mexican handcrafts and folk art is a complex collection of items made with various materials and intended for utilitarian, decorative or other purposes. Some of the items produced by hand in this country include ceramics, wall hangings, vases, furniture, textiles and much more.[1] In Mexico, both crafts created for utilitarian purposes and folk art are collectively known as “artesanía” as both have a similar history and both are a valued part of Mexico's national identity. Mexico's artesanía tradition is a blend of indigenous and European techniques and designs. This blending, called “mestizo” was particularly emphasized by Mexico's political, intellectual and artistic elite in the early 20th century after the Mexican Revolution toppled Porfirio Díaz’s French-style and modernization-focused presidency.[2] Today, Mexican artesanía is exported and is one of the reasons why tourists are attracted to the country.[3] However, competition from manufactured products and imitations from countries like China have caused problems for Mexico’s artisans.[1][4]

Mexican handcrafts and folk art is a complex collection of items made with various materials and fashioned for utilitarian, decorative or other purposes, such as wall hangings, vases, toys and items created for celebrations, festivities and religious rites.[1] These arts and crafts are collectively called “artesanía” in Mexican Spanish. This term was invented in Spanish during the 20th century to distinguish merchandise made by traditional methods versus those made by industrial/assembly line methods. The word is also used to promote traditional products to tourists and as a source of Mexican national identity.[5] Mexican artesanía has its foundations in the crafts of the many pre-Hispanic cultures within the country, but 500 years of European influence has transformed it into a mixture of the two and unique to Mexico. Most artesanía produced here shows both European and native influences in the crafting, the design or both.[1]

Artesanía can be defined as those items created by common people, using traditional methods which are well-founded in the past. Most artisans do not have school-based training in their craft, but rather learn it through formal or informal apprenticeship. The term “common people” for Mexico generally applies to people native to rural areas and those outside the upper and middle classes.[1]

Video: Woodworking Projects