Weekend Woodworking Projects Magazine Download | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive bundle, and he ended up creating a truly’complete’ woodworking resource.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are actually many things that set Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the thoughts and projects in Ted’s bundle quite easy. No doubt, intricate carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step-by-step instructions. Currently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that will help beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any job of their choice within this package quite easily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and people who buy it will be endorsed by a 60-day warranty, so when this woodworking bundle fails to satisfy them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they didn’t mind being overrun considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is really unmatchable and cannot be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his very best to guide them in every conceivable way he could, through easy to comprehend textual directions, clear images and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find inside. Therefore, it is certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with listing more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that novices will need. You may always add to your arsenal as you gain experience!

Weekend Woodworking Projects Magazine Download Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are lots of areas that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking publications do a story on how best to improve your woodworking craft. When it’s showing you the way you can apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is buying instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Weekend Woodworking Projects Magazine Download

If you’re just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking can be fun. If you don’t have the proper information, education, and ability, you might wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a couple of essential aspects you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Don’t start a project if you are not interested, because this might land you at a bad place.

2. Consider the primary reason behind creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, before you begin with a project.

4. Start projects that you’re able to complete. If you’re in the middle of a work, then it’s wise not to start any project in any way.

The Benefits of Woodworking Weekend Woodworking Projects Magazine Download

If you maintain these vital points in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking projects that you want to begin with. As a beginner, always select a project which has quite a basic construct up or a very simple construction. A few simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you find the techniques, you can always move into the next level of woodworking jobs, like cabinets, sheds, and others. Beginning projects should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Weekend Woodworking Projects Magazine Download

Tools would be the ways through which you can win the struggle of woodworking. Many people think that power tools are needs. However, for novices, basic hand tools can be quite handy and more than helpful in completing a job. If woodworking is your hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for exact cuts and dimensions. The workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at several sizes. There are different types of saws available on the market. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them will help you in advance woodworking. You might also buy keyword energy screwdrivers since they make the work much faster.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this isn’t a tool for beginners, but using it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Additional small and basic tools – These include pencils, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking jobs. Based on the type of job you would like to complete, pricing can be determined. The simple the job, the less price it involves. However, at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to fix a budget on the resources, then keyword on the undertaking. Purchasing the basic tools will ensure that you do not have to buy any more material other than the timber ply.

Time and Directions

Directions are one of the principal things that every beginner should follow. It’s like the woodworking Bible. Instructions guide is quite simple to comprehend the process, what to do and the way to do it. Time also has a significant part in the construction of woodworking projects. Woodworking projects demand time and so it’s necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword which can help you to achieve success is proper preparation. With appropriate planning and a plan, it is likely to achieve success quickly. If you know the objective of woodworking, then the item you need to construct, the resources you require in order to own and the average time it’s possible to devote daily; then you’re ready to go.

Conclusion, Weekend Woodworking Projects Magazine Download

These strategies and instruction will create the woodworking projects and plans for novices quickly to finish. Always ensure you have all the vital tools, materials, area ready. Read the instructions for constructing a product handy. Appropriate strategy and preparation can help you to make a great woodworking project for your home.

|

The Benefits of Woodworking Weekend Woodworking Projects Magazine Download

People if you’re looking for a way to pass time or want an alternate way to generate money they generally turn into a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very careful when choosing which job to begin with since there are jobs which can be too tough for a beginner. But don’t worry about that because we are going to provide you guidelines on the right means to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working equipment, therefore before you pick your project you have to be aware of whether you’ve got the available resources to work on such a project. Try not to invest a good deal of money on purchasing gear when starting out, purchase more gear as you gain more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the artistic hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Weekend Woodworking Projects Magazine Download

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking at home will give you time to explore unique projects and learn a lot of things. That’s why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It is extremely important you know more about different types of wood available for making projects. Expect carpenters use several types of wood quality for decorating bits, learning what type of wood that they use will help you prepare the wood you’ll need for certain projects you may choose to pursue.
As soon as you understand the basics of wood selection and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do will assist you in creating good projects to fulfill your needs.

Weekend Woodworking Projects Magazine Download practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs utilizing various tools so that you can get the hang of working with the tools. When starting out you may earn a number of mistakes but with time you will find out how to correctly use them and create quality projects.

|

Starting Your First Woodworking Shop Weekend Woodworking Projects Magazine Download

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal amount of tools and equipment. A small home workshop may generate a wide variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should start with, let’s talk about where you’ll perform your woodworking, based on the size of your home, you might have the ability to produce a dedicated space into your woodworking activities. This might be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to prepare your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably produce dust that travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the upper levels of the house. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This might help decrease the difficulties of dust and noise, however depending on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Weekend Woodworking Projects Magazine Download

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to function in. Weekend Woodworking Projects Magazine Download if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top gear can stay in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the beginning, set up a seat area where you are able to store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf below the bench to home your hands power tools and a pegboard above the seat to hang additional equipment. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Weekend Woodworking Projects Magazine Download

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, purchase your quality tools at the local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative local ads. There are plenty of quality gently used tools out there that belong to people who stumbled on that 1 molding project around the home or received tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for under half the initial price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and possibly travel expenses. Weigh the benefits of traveling across town to save a few extra bucks on a inexpensive piece of gear. The excess cost of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimum amount of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your skills with your start-up set of resources and prevent lamenting about the equipment you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and influence safety. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most workers tire quicker when exposed to elevated noise levels. Select powerful hearing protection that you find comfortable and effective. These can contain earplugs or complete ear keyword muff protectors. I find a quality set of ear muff guards is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Often referred to as a skill saw following the favorite name, this can end up being the most versatile instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be used to build an entire property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your second project. After choosing the right saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible tool can’t just cut corners. It is perfect for cutting holes in wood too like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this case, is much more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not want in your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot in the holder after each use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop injuries occur. Although the most ordinary, hammer injuries are usually of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Pick a title brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely upgrade to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll find that your palm sander using just a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an extra source of 100 grit paper. You’ll get this caliber of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a set of the longest clamps that you could afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed at the end of your bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with stainless steel clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer you quick release mechanisms that enabled the user to quickly open and close the limbs without tedious handle rotation. The wood beamed surfaces on your vice will occasionally require replacement. I would rather utilize soft pine in my vices that will not crush or damage lots of the different forests that I work with. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be among your most often used tools. Purchase a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your store you might not use the tape in these spans, the bigger tape measures offer more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you’re on your own will be a lot easier, and naturally, quality tape measures can endure for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Additionally, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Last, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not many glues are made equal. Stay away from inexpensive home brands sold as carpenter’s glue. The expense of adhesive through all of your jobs is a minor cost consideration. Therefore, it makes sense to go with the very best. I have also discovered over time that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Weekend Woodworking Projects Magazine Download

The peaceful satisfaction of woodworking is a wonderful experience in this era of hurried lives, smart phones, and time-starved careers. With a minimum investment in the most basic tools and equipment, anyone can learn the profitable skills of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Endless (Frank Ocean album)

Endless is a video album by American singer Frank Ocean. Released on August 19, 2016, Endless was Ocean's last release with the record label Def Jam Recordings to fulfill his recording contract.[5] Endless was distributed exclusively through Apple Music as a streaming-only video and was followed by the August 20 release of Ocean's second studio album, Blonde. Endless was later remastered and reissued on CD and vinyl on April 10, 2018, almost two years after its premiere.[6]

On February 21, 2013, Ocean confirmed that he had started work on his second studio album, which he confirmed would be another concept album. He revealed that he was working with Tyler, The Creator, Pharrell Williams, and Danger Mouse on the record.[7] He later stated that he was being influenced by The Beach Boys and The Beatles. He stated he was interested in collaborating with Tame Impala and King Krule and that he would record part of the album in Bora Bora.[8]

In April 2014, Ocean stated that his second album was nearly finished. In June 2014, Billboard reported that the singer was working with a string of artists including Happy Perez, Charlie Gambetta and Kevin Ristro (whom he worked with on Nostalgia, Ultra), as well as Hit-Boy, Rodney Jerkins and Danger Mouse.[9][10] On November 29, 2014, Ocean released a snippet of a new song supposedly from his upcoming follow-up to channel ORANGE called "Memrise" on his official Tumblr page. The Guardian described the song as: "a song which affirms that despite reportedly changing labels and management, he has maintained both his experimentation and sense of melancholy in the intervening years".[11] On April 6, 2015, Ocean announced that his follow-up to channel ORANGE would be released in July, as well as a publication, although no further details were released. The album was ultimately not released in July, with no explanation given for its delay. The publication was rumored to be called Boys Don't Cry, and the album was slated to feature the aforementioned "Memrise".[12][12][13][14]

Video: Woodworking Tools