Wood Arts And Crafts Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an instructor and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are following because most of the thoughts and projects Ted’s resource are easy to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure if they need to be purchasing Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more challenging to make the ideal option. There are in fact lots of things that set Ted’s woodworking Bundle apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit out of Ted’s woodworking Package. People that are just getting started will discover the thoughts and jobs in Ted’s bundle quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will find it really simple to follow Ted’s simple step-by-step instructions. Currently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any project of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who purchase it will be backed by a 60-day guarantee, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking package is so comprehensive and vast it contains just about every woodworking project a woodworker might be interested in constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that are available across the internet. Ted has done his best to guide them in every possible way he could, through simple to comprehend textual directions, clear pictures and even movies as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Wood Arts And Crafts Ideas

Woodworking is 1 hobby that can also be a rewarding profession if you like to work together with your hands and build exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to build all types of furniture, (beds, table, and chairs), effortlessly. You can then sell your completed woodworking jobs and make a handsome profit. Wood Arts And Crafts Ideas.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman level is you will have the ability to create some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation whenever you have friends come over to visit. They will ask: How did you create it? Where did you get the woodworking programs? How long can it take to finish the project? What kind of tools did you use? How on earth did you make such a beautiful piece of furniture? As you speak about your job, a sense of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

How to Become a Master Woodworker From Your Own Home Wood Arts And Crafts Ideas

If you are thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such a fun hobby and it is perfect for beginners!

Where to begin in Woodworking? Wood Arts And Crafts Ideas.

Begin with a concept in mind of what you would like to build then get a really good woodworking project plan that’s geared toward novices. There are several little woodworking projects for beginners available for purchase from online woodworking retailers. A couple of woodworking program suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a child just to name a few. Of course, you can begin with as grand a woodworking plan as you choose. On the other hand, the chances are if you start out using a little woodworking project at first, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan must incorporate some lists! Length of: woodworking equipment, the amount and type of wood needed, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about buying woodworking tools. Only buy what you want to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not affordable. The newcomer needs good woodworking gear, but it is simple to break the bank buying a lot of tools you might not use all that frequently. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the moment.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, finish punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and do not forget that the wood glue and a brush to spread the wood glue! Of course, you will need a dry area to work and might require a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always increase your toolbox as you get experience!

Wood Arts And Crafts Ideas Guidance for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking publications do a story on how to improve your woodworking craft. When it is showing you the way you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD such as the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Arts And Crafts Ideas

If you’re just beginning and very enthusiastic about doing a DIY job for home then, woodworking could be interesting. If you do not have the right information, instruction, and skill, you might land up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential factors that you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special sense. Do not start a job if you are not interested, because this might land you at a terrible place.

2. Think of the primary reason for creating this woodworking project. Choose the uses of this item you are making.

3. Consider your abilities and analyze the time that you have, before you start with a project.

4. Start projects that you’re able to complete. If you’re in the middle of some work, then it is better to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Wood Arts And Crafts Ideas

If you keep those essential points in mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you wish to start with. As a beginner, always pick a job which has quite a basic construct up or a very simple structure. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you could always proceed into the next level of woodworking jobs, such as cupboards, sheds, and others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Arts And Crafts Ideas

Tools would be the ways through which you can win the struggle of woodworking. A lot of people think that power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, offer ample space to work. As a key tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you purchase a hammer, constantly check the balance between the weight and endure. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there on the market. Decide on a size which you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this is not a tool for novices, but using it might make work easier for you at a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Low wattage power drills will make the job much simple.

8. Additional small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking projects. Based on the type of job that you want to complete, pricing could be set. The easy the project, the less price it involves. However, at the very beginning purchasing the tools will be a little hefty. Therefore, it is better to fix a budget on the tools, then keyword on the project. Buying the basic tools will ensure that you do not need to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the principal things which each and every beginner should follow. Instructions manual is quite easy to comprehend the process, what to do and the way to do it. It keyword is a systematic guide for finishing the job. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and therefore it’s crucial for a beginner to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. Nevertheless, the most indispensable thing keyword that will allow you to reach success is proper preparation. With appropriate planning and a plan, it’s likely to achieve success quickly. If you understand the purpose of woodworking, then the thing that you want to construct, the tools you require to possess and the typical time you can give daily; then you are ready to go.

Conclusion, Wood Arts And Crafts Ideas

These tips and education will make the woodworking projects and plans for beginners fast to finish. Always make sure you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Appropriate strategy and planning will allow you to make a great woodworking job for your home.

|

The Benefits of Woodworking Wood Arts And Crafts Ideas

People if you’re trying to find a way to pass time or want an alternate way to generate money they generally turn to a hobby that they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can get started.

When doing woodworking in your home there are lots of jobs one can consider. When starting out you have to be very cautious when choosing which job to start out with since you will find jobs that may be too difficult for a newbie. But do not worry about that since we are going to provide you guidelines on the right way to start woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, so before you pick your job you need to know if you have the available resources to work on such a job. Try not to invest a good deal of money on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Wood Arts And Crafts Ideas

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will give you time to research unique projects and find out so many things. That’s why it’s very important to invest less money when starting out so you can manage to make errors and at some time learning about various jobs.
It’s extremely important you know about the different types of wood available for creating projects. Anticipate carpenters utilize different kinds of wood quality for decorating bits, learning which kind of wood they use will help you prepare the wood you’ll need for certain projects you might want to pursue.
As soon as you know the basics of wood selection and the use of different tools you can now employ them in cutting well wood pieces and putting wood together. Knowing what to do will help you in building good projects to satisfy your wants.

Wood Arts And Crafts Ideas practice makes perfect so be sure you practice your work daily if possible. Try out lots of layouts utilizing a variety of tools so that you can find the hang of working with the tools. When starting out you may make a range of mistakes but with time you will find out how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Arts And Crafts Ideas

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal amount of tools and equipment. A little home workshop can produce a broad variety of simple projects that can help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you’ll do your woodworking, based on the size of your house, you might be able to create a dedicated space to your woodworking activities. This may be a reserved spot in your garage or on your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust that travels into the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw dust up into the upper levels of the home. Another benefit of detached workshops would be, of course, the sound level. It’s possible to work without bothering the remainder of the household. A fantastic compromise might be the garage of your property.

This can help decrease the problems of dust and sound, however based on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Wood Arts And Crafts Ideas

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Wood Arts And Crafts Ideas if you’re able to have a dedicated place for a marathon all the better. Floor tools and bench top gear can remain in position from project to project. If this installation isn’t impossible, at least attempt to create a bench area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a seat area where you are able to shop and use the majority of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to home your hands power tools and a pegboard above the bench to hang other gear. Install a woodworking at one end of the seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Arts And Crafts Ideas

The reach of your start-up equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools at your regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local ads. You will find an abundance of quality gently used tools out there which belong to people who embarked on that 1 molding project around the house or obtained tools as presents which they will never use. You can usually buy tools for these sellers for under half of the original cost and save even more money if you make a bundle deal for all their unused equipment. Obviously, getting tools from private individuals will require additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few added dollars on a cheap piece of gear. The excess cost of time and travel in these situations is usually justified when buying large ticket items like table saws, bandsaws or high finished tools like surface planers in the future.
For smaller acquisitions, a trip to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum amount of hand equipment yet generated sophisticated and intricate bits. Focus on developing your abilities with your start-up set of tools and avoid lamenting about the equipment you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently known as a skill saw after the popular name, this may prove to be the most versatile tool in a startup workshop. In reality, in the hands of an expert, a power hand saw can be employed to build an whole property. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw put in a quality blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool can’t only cut curves. It’s ideal for cutting holes in timber too like manage slots. Eventually, you’ll want to obtain a ring saw. Bandsaws are much more versatile but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy an excellent drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more critical than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slide frequently. This is 1 annoyance you do not want in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill bit to its prospective slot at the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Although the most frequent, hammer accidents are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the head and handle. The mind usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce scope for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll probably update to a floor version disc and belt sander. However, for now, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited amounts of surface area. As you embark on your first few projects you’ll discover your palm sander using a little bit of effort can change rough looking creations into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and fix any imperfections in wood pieces. {Begin with a standard amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, good clamps are expensive and it normally takes the novice woodworker a couple of years to collect a detailed set of wood clamps. Start with a pair of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you could spend. You may contact them for smaller adhesive jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer quick release mechanisms that enabled the consumer to quickly open and close the limbs with no tedious handle turning. The timber clamping surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices which will not crush or damage many of the various forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a good quality name brand tape measure with a wide tape usually from the 25-foot range. Even though in your store you might not be using the tape in these lengths, the bigger tape steps provide more rigid tapes that will not flop around and slip off the ending of planks. Assessing when you’re on your own will be a great deal simpler, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a wonderful mark without scratching the wood. Harder pencils like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too coarse for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I discover that the Robertson format works best for many woodworking jobs and is the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood files. The cost of glue through all your projects is a little cost consideration. Therefore, it makes sense to go with the very best. I have also discovered over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Wood Arts And Crafts Ideas

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment at the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Arts and Crafts movement

The Arts and Crafts movement was an international trend in the decorative and fine arts that began in Britain and flourished in Europe and North America between about 1880 and 1920, emerging in Japan in the 1920s as the Mingei movement. It stood for traditional craftsmanship using simple forms, and often used medieval, romantic, or folk styles of decoration. It advocated economic and social reform and was essentially anti-industrial.[1][2][3] It had a strong influence on the arts in Europe until it was displaced by Modernism in the 1930s,[4] and its influence continued among craft makers, designers, and town planners long afterwards.[5]

The term was first used by T. J. Cobden-Sanderson at a meeting of the Arts and Crafts Exhibition Society in 1887,[6] although the principles and style on which it was based had been developing in England for at least 20 years. It was inspired by the ideas of architect Augustus Pugin, writer John Ruskin, and designer William Morris.[7]

The movement developed earliest and most fully in the British Isles[4] and spread across the British Empire and to the rest of Europe and America.[8] It was largely a reaction against the perceived impoverishment of the decorative arts at the time and the conditions in which they were produced.[1]

Video: Woodworking Tools