Wood Box Plans Free Download | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable thoughts and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking when they are after because all the ideas and jobs Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years researching so that he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it more challenging to make the right choice. There are in fact many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to profit out of Ted’s woodworking Package. People that are just getting started will discover the ideas and projects in Ted’s package quite easy. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice in this bundle quite easily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it’ll be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker may be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found across the net. Ted has done his very best to guide them in every possible way he can, through simple to comprehend textual directions, clear images and even videos too.

Thus, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it’s definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools , but the concept is to buy the essential hand and power tools that novices will need. You can always add to your toolbox as you gain experience!

Wood Box Plans Free Download Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have bought your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. But if you are not certain about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the writers in woodworking publications do a story about the best way best to improve your woodworking craft. When it’s showing you how to apply an end to a finished job, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Wood Box Plans Free Download

If you’re a beginner and very enthusiastic about doing a DIY project for house then, woodworking can be interesting. If you don’t have the proper information, instruction, and ability, you may wind up spending more money and time than you initially intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you need to keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you should first need to be somewhat interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a job if you’re not interested, as this may land you in a terrible location.

2. Think of the main reason for making this woodworking project. Choose the uses of this thing you’re making.

3. Consider your skills and examine the time you have, until you begin with a project.

4. Start projects that you can finish. If you are in the middle of some work, then it is wise not to start any project at all.

Finding Woodworking Projects and Plans for Beginners Wood Box Plans Free Download

If you keep these essential points in your mind before you begin a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it takes effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you wish to start with. As a beginner, always select a project that has a very basic construct up or a very simple construction. A few easy to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you can always move to the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with woods and their tools. Once the project is selected, start selecting your own tools.

Beginners Woodworking Tools, Wood Box Plans Free Download

Tools would be the ways whereby you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is needed for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to operate. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you purchase a hammer, constantly assess the equilibrium between the weight and endure. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool helps you to cut woods at different sizes. There are various sorts of saws available on the market. Choose a size that you could deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You might even purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but using it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in wood. Power drills are more useful but they cost more. Low wattage power drills can make the task much easy.

8. Additional small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s no fixed price on woodworking jobs. Dependent on the sort of job you want to finish, pricing can be set. The easy the project, the less cost it involves. But at the beginning purchasing the tools will probably be somewhat hefty. Therefore, it is much better to fix a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not need to buy any more material aside from the wood ply.

Time and Directions

Instructions are one of the principal things that every beginner should follow. It’s like the woodworking Bible. Instructions manual is quite simple to comprehend the procedure, what to do and how to get it done. Time also has an important part in the building of woodworking projects. Woodworking projects require time and therefore it is necessary for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that will make the work easy. But the most essential thing keyword that can help you to achieve success is proper preparation. With proper planning and a strategy, it’s possible to achieve success immediately. If you know the purpose of woodworking, then the item that you want to construct, the resources you require in order to own and the typical time you can give daily; then you’re ready to go.

Conclusion, Wood Box Plans Free Download

All these tips and instruction will create the woodworking projects and strategies for beginners fast to finish. Always ensure that you have all of the vital tools, materials, area prepared. Read the instructions for building a product handy. Proper strategy and preparation can help you to earn a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Wood Box Plans Free Download

Folks when trying to find a way to pass time or want an alternative way to generate money they usually turn to a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can consider. When starting out you need to be very cautious when choosing which job to begin with since there are jobs which may be too difficult for a beginner. But don’t be concerned about that because we are going to give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you choose your job you need to know if you’ve got the available tools to work on such a job. Try not to spend a good deal of cash on buying equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there will not be any difference between the hand and the hands.

Finding Woodworking Projects and Plans for Beginners Wood Box Plans Free Download

Woodworking at home will give you time to research different jobs and learn so many things. That’s why it’s important to spend less money when starting out so you can manage to make errors and at some time learning about various projects.
It is very important you know about the different kinds of wood available for creating jobs. Expect carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use can allow you to prepare the wood you’ll need for specific projects you might want to pursue.
As soon as you know the fundamentals of wood selection and the use of different tools you can now implement them in cutting out well wood pieces and putting wood together. Knowing what to do will assist you in building good projects to fulfill your needs.

Wood Box Plans Free Download practice makes perfect so be sure that you practice your work every day if possible. Try out a lot of layouts utilizing various tools so that you can find the hang of working with the tools. When starting out you can make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Wood Box Plans Free Download

Woodworking as a hobby may be one of the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimal number of gear and equipment. A little home workshop may generate a broad variety of simple projects that will allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let’s discuss where you will do your woodworking, Depending on the dimensions of your home, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved place in your garage or in your basement. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields found in the basement draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise might be the garage of your home.

This can help minimize the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Wood Box Plans Free Download

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes they include more space to work in. Wood Box Plans Free Download if you’re able to have a dedicated place for a marathon all the better. Floor gear and bench top gear can stay in position from project to project. If this setup is not impossible, at least try to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and gear. In the beginning, establish a bench area where you are able to shop and use most of your gear, with a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the bench to home your hand power tools and a pegboard above the seat to hang other equipment. Install a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Box Plans Free Download

The reach of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality gear. If you can afford it, purchase your quality tools at your regional construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used programs out there which belong to individuals who embarked on that one molding job around the home or obtained tools as gifts that they will never use. You can usually buy tools for all these sellers for under half the initial price and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenses. Weigh out the benefits of traveling across town to save a couple added dollars on a inexpensive piece of equipment. The extra cost of travel and time in these situations is generally justified when buying large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimal quantity of hand equipment yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your startup set of tools and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality oil collection that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and influence security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to high sound levels. Select effective hearing protection which you find comfortable and effective. These may include earplugs or complete ear keyword muff protectors. I find a excellent set of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust from your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may prove to be the most flexible tool in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an whole house. At some point, you are going to want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to perform cross cuts, rip cuts and even intricate angle cuts. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your second project. After selecting the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It’s ideal for cutting holes in timber too like handle slots. At some point, you’re going to want to get a ring saw. Bandsaws are even more versatile but a quality floor unit could be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch model. Through tough lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is one annoyance you don’t want in your workshop. Buy an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop injuries occur. Even though the most ordinary, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you’ve got as a novice woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disc and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might discover your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess source of 100 grit paper. You’ll get this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in timber bits. {Begin with a standard number 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of timber clamps. Begin with a set of long”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure remains the same. Receive a pair of the maximum clamps which you can afford. You can contact them for smaller adhesive jobs and enlarge them to their entire length for bigger projects.

Shop Vice: A store vice installed in the end of your bench is ideal for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood bits without marring or damaging them. A number of the greater vices offer quick release mechanisms that enabled the consumer to quickly open and close the limbs with no dull handle rotation. The timber clamping surfaces in your vice will periodically require replacement. I would rather utilize soft pine in my vices which won’t crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of the most frequently used tools. Buy a good quality name brand tape measure with a wide tape typically in the 25-foot range. Even though in your store you may not use the tape in these spans, the bigger tape measures provide more rigid tapes which won’t flop around and slip off the ending of boards. Assessing when you’re on your own will be a great deal simpler, and of course, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and repairing little mistakes along the way.

Adhesives: Not many glues are created equal. Stay away from cheap home brands sold as carpenter’s glue. The cost of adhesive through all your projects is a minor cost consideration. For that reason, it is sensible to go with the best. I have also discovered over time that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and fail with moisture.

CONCLUSION, Wood Box Plans Free Download

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

The Box (2009 film)

The Box is a 2009 American psychological thriller film[3][4] based on the 1970 short story "Button, Button" by Richard Matheson, which was previously adapted into an episode of the 1980s iteration of The Twilight Zone. The film was written and directed by Richard Kelly and stars Cameron Diaz and James Marsden as a couple who receive a box from a mysterious man (played by Frank Langella) who offers them one million dollars if they press the button sealed within the dome on top of the box, but tells them that, once the button has been pushed, someone they do not know will die.[5]

In December 1976, financially-strapped couple Arthur (a NASA engineer) and Norma Lewis find a package on their doorstep. Inside is a wooden box, with a large red button locked under a transparent dome top. An accompanying note reads: "Mr. Steward will call upon you at 5:00 pm." Mr. Steward, a mysterious man with the left side of his face burned off, arrives to deliver the key for the box. He tells Norma that, if the button is pushed, he will give her a tax-free payment of $1 million in cash. However, someone she does not know will die. $100 is given to Norma by Mr Steward as compensation for allowing him to enter the house and voice his deal.

Norma and Arthur have ethical and moral arguments about pushing the button, wondering whether the death will be a young and innocent person, or a person on death row. Their son, Walter, is attending private school where Norma teaches, and she had just been informed that the school would no longer offer her a discount for his education, making the million dollars all the more enticing. While discussing it, Arthur and Norma open the box, and discover that the box is 'just a bunch of wood'. The couple discuss it further, with Arthur chastising Norma for being scared about the deal. No resolution is made and the two go to sleep.

Video: Woodworking Tools