Wood Building Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking whenever they’re after because most of the thoughts and projects Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so that he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more difficult to make the ideal option. There are actually many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and jobs in Ted’s package quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will find it really easy to follow Ted’s easy step-by-step directions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who buy his bundle, specifically:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers are going to have the ability to locate any job of their choice in this package quite readily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Yet, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design package is so thorough and vast it contains pretty much every woodworking project a woodworker may be considering constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the internet. Ted has done his very best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to purchase the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Wood Building Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. However, if you’re unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines out there. Each month the authors in woodworking publications do a story about how best to increase your woodworking craft. Whether it is showing you how you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Wood Building Plans

If you’re a beginner and very interested in doing a DIY job for house then, woodworking could be interesting. If you don’t have the right information, instruction, and skill, you may wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a couple of essential aspects you need to remember, before beginning with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Creating something new with your own hands is a special feeling. Do not begin a job if you’re not interested, because this might land you in a bad location.

2. Consider the primary reason behind creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and examine the time you have, until you start with a project.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it is better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Wood Building Plans

If you maintain these vital points in your mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs that you want to start with. As a newcomer, always select a project that has quite a basic construct up or a simple structure. Some easy to start projects include, bird feeder, benches, shelves, etc.. As soon as you find these techniques, you could always move into the next level of woodworking projects, like cupboards, sheds, and others. Beginning projects should always keyword be complicated and less frustrating so that you have a better knowledge of working with woods and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wood Building Plans

Tools would be the means whereby you will win the battle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be quite handy and more than helpful in completing a project. If woodworking is the hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when mended with vises, offer ample space to work. As a key tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It can help you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you buy a hammer, always assess the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws available on the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian kinds and standard flat type. Having all of them can help you ahead of time woodworking. You can even purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. Nonetheless, this is not a tool for beginners, but having it would make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There is not any fixed cost on woodworking projects. Dependent on the type of job you want to finish, pricing could be set. The easy the job, the less price it involves. However, at the beginning purchasing the tools will be somewhat hefty. Because of this, it is better to resolve a budget on the tools, then keyword on the undertaking. Buying the basic tools will ensure that you do not need to purchase any more material aside from the timber ply.

Time and Directions

Directions are among the principal things that each and every beginner should follow. Instructions guide is quite easy to comprehend the process, what to do and the way to get it done. It keyword is a systematic guide for completing the job. Time also plays an important part in the building of woodworking jobs. Woodworking projects demand time and therefore it’s crucial for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword which will allow you to achieve success is proper preparation. With proper planning and a plan, it’s likely to achieve success quickly. If you understand the objective of woodworking, the item you want to construct, the tools you need to possess and the average time it’s possible to devote every day; then you’re ready to go.

Conclusion, Wood Building Plans

All these strategies and instruction is likely to make the woodworking projects and plans for beginners fast to finish. Always ensure that you have all the essential tools, materials, area prepared. Read the instructions for constructing a product handy. Appropriate strategy and preparation can help you to earn a fantastic woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Building Plans

People if you’re trying to find a way to pass time or desire an alternative method to generate money they usually turn to a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are a lot of projects one can consider. When starting out you have to be very careful when choosing which project to begin with since there are projects which can be too difficult for a newbie. But do not be concerned about that since we will provide you guidelines on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, so before you pick your job you need to know if you have the available resources to work on such a project. Try not to invest a good deal of cash on buying equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there will be no gap between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Wood Building Plans

Woodworking at home will provide you time to explore different projects and find out a lot of things. That’s why it’s very important to spend less money when starting out so you can afford to make errors and at some time learning about different jobs.
It’s extremely important you know more about the different kinds of wood available for making projects. Expect carpenters use different kinds of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you’ll need for certain jobs you might want to pursue.
As soon as you understand the fundamentals of wood selection and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in building good jobs to fulfill your wants.

Wood Building Plans practice makes perfect so make sure that you practice your work every day if possible. Try out lots of designs using various tools so that you may get the hang of using the tools. When starting out you may make a range of mistakes but with time you will learn how to properly use them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Building Plans

Woodworking as a hobby may be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimum number of tools and equipment. A little home workshop can produce a broad variety of simple projects which will allow you to develop your creative and construction abilities while rewarding you with practical and artistic wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s talk about where you’ll perform your woodworking, based on the dimensions of your house, you may have the ability to produce a dedicated space into your woodworking tasks. This might be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding may be ideal to prepare your first shop. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the house. Another advantage of detached workshops would be, clearly, the noise level. You can work without disturbing the remainder of the household. A fantastic compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you reside, a keyword garage workshop may not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Wood Building Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes that they add more space to work in. Wood Building Plans if you’re able to have a dedicated place for a workshop all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the start, establish a bench area where you are able to shop and use most of your gear, with a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf below the seat to home your hands power tools and a pegboard above the seat to hang other equipment. Put in a woodworking at one end of the bench on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Building Plans

The scope of your startup equipment will be largely based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional advertisements. You will find an abundance of quality gently used tools out there that belong to individuals who embarked on that one molding project around the home or obtained tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half of the initial price and save even more money should you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and perhaps travel expenditures. Weigh the advantages of traveling around town to save a couple extra dollars on a cheap piece of gear. The extra cost of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand gear yet produced sophisticated and intricate bits. Concentrate on developing your skills with your start-up set of tools and avoid lamenting about the gear you wished you’d.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Gear: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety equipment you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to elevated sound levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. With this set up I am shielding my eyes and my ears. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite name, this may end up being the most flexible tool in a start-up workshop. In fact, in the hands of a professional, a power hand saw could be employed to build an entire property. At some point, you’ll want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These are inclined to cut inaccurately and will burn out before you even start your next job. After choosing the proper saw install an excellent blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid . All these have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument cannot only cut curves. It is ideal for cutting holes in wood too like handle slots. At some point, you’re going to want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck within the standard 3/8 inch model. Through hard lessons learned, I have discovered that purchasing quality, in this scenario, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged often. Their long-term battery life tends to be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you do not want in your workshop. Purchase an range of quality carbide tipped drill bits that are stored in a holder tagging each drill bit size. Make a habit of returning each drill bit to its potential slot in the holder after each use. Lastly, get a set of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most versatile instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high tech range offer metal or fiberglass handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can handle just about any trimming requirements that you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll likely update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might discover that your palm sander using just a little bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and after finish your job with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this caliber of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Start with a typical number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold down your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a few years to collect a detailed set of wood clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps that you could spend. You may contact them for smaller glue jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of the bench is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the user to quickly open and close the limbs with no dull handle turning. The timber beamed surfaces in your vice will occasionally need replacement. I would rather utilize soft pine in my vices that will not crush or damage many of the different woods that I work with. Whether I am working in walnut or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among your most frequently used tools. Buy a good excellent name brand tape measure with a wide tape typically in the 25-foot selection. Even though in your store you may not use the tape in these spans, the larger tape steps provide more rigid tapes that won’t flop around and slip off the ending of boards. Assessing when you’re by yourself will be a great deal simpler, and of course, quality tape measures can endure for several years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will need additional sanding. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking jobs and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The cost of adhesive through all of your projects is a little cost consideration. Therefore, it is sensible to decide on the very best. I have also discovered over time that I get the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike conventional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Wood Building Plans

The peaceful gratification of woodworking is a wonderful adventure in this day and age of rushed lives, smart phones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, everyone can learn the rewarding abilities of his time-tested avocation and enjoy job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

House

A house is a building that functions as a home. They can range from simple dwellings such as rudimentary huts of nomadic tribes and the improvised shacks in shantytowns to complex, fixed structures of wood, brick, concrete or other materials containing plumbing, ventilation, and electrical systems.[1][2] Houses use a range of different roofing systems to keep precipitation such as rain from getting into the dwelling space. Houses may have doors or locks to secure the dwelling space and protect its inhabitants and contents from burglars or other trespassers. Most conventional modern houses in Western cultures will contain one or more bedrooms and bathrooms, a kitchen or cooking area, and a living room. A house may have a separate dining room, or the eating area may be integrated into another room. Some large houses in North America have a recreation room. In traditional agriculture-oriented societies, domestic animals such as chickens or larger livestock (like cattle) may share part of the house with humans. The social unit that lives in a house is known as a household.

Most commonly, a household is a family unit of some kind, although households may also be other social groups, such as roommates or, in a rooming house, unconnected individuals. Some houses only have a dwelling space for one family or similar-sized group; larger houses called townhouses or row houses may contain numerous family dwellings in the same structure. A house may be accompanied by outbuildings, such as a garage for vehicles or a shed for gardening equipment and tools. A house may have a backyard or frontyard, which serve as additional areas where inhabitants can relax or eat.

The English word house derives directly from the Old English hus meaning "dwelling, shelter, home, house," which in turn derives from Proto-Germanic husan (reconstructed by etymological analysis) which is of unknown origin.[3] The house itself gave rise to the letter 'B' through an early Proto-Semitic hieroglyphic symbol depicting a house. The symbol was called "bayt", "bet" or "beth" in various related languages, and became beta, the Greek letter, before it was used by the Romans.[4]

Video: Woodworking Tools