Wood Building Project Ideas | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an educator and a member of AWI as well. Ted’s woodworking Package Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they’re following because all the thoughts and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years exploring so that he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still appear unsure if they should be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. People who are just getting started will find the ideas and jobs in Ted’s bundle quite easy. No doubt, complicated carpentry is involved; however, they will discover that it’s really easy to follow Ted’s easy step-by-step directions. Presently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which helps beginners learn a whole lot about woodworking. They will also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking thoughts and woodworking projects. Woodworkers will be able to find any job of their choice in this bundle quite readily, though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this item is and people who purchase it will be backed by a 60-day warranty, so if this woodworking bundle fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Yet, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overwhelming and overpowering. Nonetheless, they did not mind being overrun considering how this package is so impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker might be considering constructing.

This woodworking bundle made by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that can be found across the internet. Ted has done his very best to direct them in every possible way he can, through easy to understand textual instructions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and more woodworking power tools here, but the idea is to purchase the crucial hand and power tools that beginners will need. You can always increase your toolbox as you get experience!

Wood Building Project Ideas Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking publications do a story about the best way to increase your woodworking craft. When it is showing you the way you can apply an end to a finished job, or how to make a mortise and tenon joint, something new can be learned each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Wood Building Project Ideas

If you are just beginning and very interested in doing a DIY project for home then, woodworking could be interesting. If you don’t have the proper information, instruction, and skill, you may land up spending more time and money than you initially intended to spend. As a beginner woodworker, you want to have time and the correct tools. Having said, there are a couple of essential factors you should keep in mind, before starting with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a special feeling. Do not start a project if you’re not interested, as this may land you in a terrible location.

2. Consider the main reason behind creating this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and analyze the time you have, before you begin with a project.

4. Start jobs that you’re able to finish. If you are in the middle of a work, then it’s wise to not begin any project in any way.

Finding Woodworking Projects and Plans for Beginners Wood Building Project Ideas

If you keep those essential things in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much because it requires effort. So how can you get started?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to start with. As a beginner, always pick a project which has quite a basic build up or a simple construction. Some easy to begin projects include, bird feeder, benches, shelves, etc.. As soon as you get hold of the techniques, you could always move into the next level of woodworking projects, like cupboards, sheds, and others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their resources. Once the project is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Building Project Ideas

Tools would be the ways whereby you can win the battle of woodworking. A lot of people believe power tools are needs. But for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is needed for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you buy a hammer, always check the balance between the weight and endure. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws out there on the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills can make the job much easy.

8. Other small and basic tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is no fixed price on woodworking projects. Dependent on the type of project you want to complete, pricing can be determined. The easy the job, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t need to purchase any more material other than the timber ply.

Time and Directions

Instructions are among the principal things which every newcomer should follow. It’s like the woodworking Bible. Instructions guide is quite simple to comprehend the process, what to do and the way to get it done. Time also has an important role in the construction of woodworking projects. Woodworking projects require time and so it is crucial for a novice to have ample amount of time weekly.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to achieve success is proper planning. With appropriate planning and a plan, it’s likely to achieve success immediately. If you understand the purpose of woodworking, then the item that you want to construct, the tools you need to possess and the typical time it’s possible to give every day; then you’re ready to go.

Conclusion, Wood Building Project Ideas

These strategies and education is likely to make the woodworking projects and plans for novices quickly to finish. Always ensure that you have all of the essential tools, materials, space ready. Read the instructions for building an item handy. Appropriate strategy and preparation will help you to earn a great woodworking project for your property.

|

Starting Your First Woodworking Shop Wood Building Project Ideas

Folks if you’re trying to find a way to pass time or desire an alternate way to generate money they generally turn to a hobby they enjoy. Woodworking is one of the hobbies people turn to perform as a hobby or home based company. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can consider. When starting out you have to be very careful when choosing which project to start out with since there are projects which can be too tough for a beginner. But do not be concerned about that since we will give you guidelines on the ideal means to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you choose your project you have to be aware of whether you’ve got the available resources to work on such a project. Try not to spend a lot of money on purchasing equipment when starting out, purchase more gear as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

The Benefits of Woodworking Wood Building Project Ideas

Woodworking in your home will provide you time to research unique projects and find out a lot of things. That is why it’s very important to spend less money when starting out so you can manage to make mistakes and at any time learning about different jobs.
It’s very important you know about the different kinds of wood available for creating projects. Anticipate carpenters utilize different types of wood quality for decorating pieces, learning which type of wood they use will help you prepare the wood you’ll need for certain jobs you may choose to pursue.
Once you know the basics of wood choice and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your needs.

Wood Building Project Ideas practice makes perfect so be sure that you practice your work every day if possible. Try out lots of layouts utilizing a variety of tools so that you may get the hang of working with the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Wood Building Project Ideas

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can produce a wide variety of simple projects which will help you develop your creative and building skills while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot on your garage or in your cellar. In some cases, a detached shed or outbuilding may be ideal to prepare your first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems where cold air returns located in the cellar draw up dust into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the family. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Wood Building Project Ideas

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they add more space to work in. Wood Building Project Ideas if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a bench area where you can store and use the majority of your gear, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Building Project Ideas

The reach of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality gear. If you can afford it, then buy your quality tools at your local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative local ads. There are an abundance of quality lightly used tools out there which belong to people who embarked on that 1 molding project around the home or received tools as gifts that they won’t ever utilize. You can usually buy tools for these sellers for under half the original cost and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require extra time and perhaps travel expenses. Weigh the advantages of traveling across town to save a few added dollars on a cheap piece of gear. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools such as surface planers in the future.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your startup set of resources and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a nice pair of safety glasses that also offer some side protection for your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence security. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels can affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this can end up being the most versatile tool in a startup workshop. In fact, in the hands of an expert, a power hand saw could be employed to build an entire house. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your next project. After choosing the proper saw put in an excellent blade. Most saws come with a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade. These possess a balanced enamel count which works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument cannot only cut curves. It’s ideal for cutting holes in timber also like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck within the standard 3/8 inch model. Down the road, the 1/2 inch version will end up being versatile. Through tough lessons learned, I have discovered that buying quality, in this case, is more critical than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is one annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the store, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents occur. Even though the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage just about any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably upgrade to a floor model disk and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might find that your palm sander using a bit of effort can change rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an assortment of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Although low tech in concept, these tools allow you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a typical number 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Begin with a set of long”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure remains the same. Receive a set of the maximum clamps which you could spend. You can contact them for smaller glue jobs and expand them to their full length for larger jobs.

Shop Vice: A shop vice installed in the end of the seat is ideal for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enabled the user to rapidly open and close the jaws without dull handle rotation. The wood clamping surfaces in your vice will periodically require replacement. I prefer to utilize soft walnut in my vices that won’t crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape usually from the 25-foot range. Even though in your shop you might not be using the tape at these lengths, the larger tape steps provide more rigid tapes that won’t flop around and slip off the ending of planks. Assessing when you are by yourself will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the ideal angles in addition to compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. The cost of glue through all your projects is a minor cost consideration. For that reason, it is sensible to go with the best. I also have found over time that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Wood Building Project Ideas

The peaceful gratification of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment at the most basic equipment and tools, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

  • NKBA Behavior Study Details Kitchen Habits and Impact on Design

    HACKETTSTOWN, N.J. —  How do people really use their kitchens? This is what the National Kitchen & Bath Association (NKBA) endeavored to find out in its latest market research, which offers a detailed analysis into the evolving way homeowners live in their kitchens and how this drives remodeling preferences in the $74 billion kitchen market.
     
    The Lifestyle Segmentation Report, released this month, identifies homeowner attitudes and behaviors regarding cooking, meal preparation, entertaining and kitchen design, and the influence of their lifestyles on the kitchen remodel and installation process.
     
    The national online survey was conducted among nearly 800 adults with household income of $40,000 or higher who had remodeled their kitchen or planned to remodel between November 2016 and August 2018. The survey segmented respondents by their confidence levels regarding cooking abilities, confidence in their kitchen design abilities, and their comfort level with using technology in the kitchen.
     
    “This exclusive research is somewhat of a departure from our traditional studies, which typically analyze product categories, design trends, size of the market and business projections,” said Bill Darcy, NKBA CEO. “It’s the first time we are looking at how changes in consumer lifestyle impact the actual use of our industry’s product and services. The data provides valuable insight for designers, remodelers, dealers, showroom associates and other professionals in how they serve their clients. This commitment to research and analysis reinforces NKBA’s thought leadership in the marketplace, and offers strategic information for the benefit of our membership.”
     
    The report provides data on family dining, meal preparation, entertaining and other activities occur in the kitchen (paying bills, homework, and more). Also reported is how homeowners use technology in the space and what storage needs they require. Furthermore, the study offers a correlation between these elements and design, the need for professionals in the process, how and where consumers shop for and buy kitchen products, and more.
     
    The full Lifestyle Segmentation Report is available for purchase at the NKBA store. For more information, click on NKBA-Lifestyle-Segmentation-Report or NKBA-Lifestyle-Segmentation-Executive-Summary.
     
     The National Kitchen & Bath Association (NKBA) is the not-for-profit trade association that owns the Kitchen & Bath Industry Show® (KBIS), as part of Design & Construction Week (DCW). With nearly 14,000 member companies representing tens of thousands of members in all segments of the kitchen and bath industry, the NKBA has educated and led the industry since the association’s founding in 1963. The NKBA envisions a world where everyone enjoys safe, beautiful and functional kitchen and bath spaces. The mission of the NKBA is to inspire, lead and empower the kitchen and bath industry through the creations of certifications, marketplaces and networks. For more information, visit www.NKBA.org  

List of building materials

Some building materials like cold rolled steel framing are considered modern methods of construction, over the traditionally slower methods like blockwork and timber. Many building materials have a variety of uses, therefore it is always a good idea to consult the manufacturer to check if a product is best suited to your requirements.

Video: Woodworking Tools