Wood Crafts For Beginners | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they’re after because most of the thoughts and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years researching so he could collect enough material for a comprehensive bundle, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure if they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it more difficult to make the ideal choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. Those who are only getting started will discover the ideas and projects in Ted’s package quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step-by-step instructions. Presently, both novice and experienced ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who buy his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 easy woodworking ideas and woodworking jobs. Woodworkers are going to be able to find any job of their choice in this bundle quite easily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it’ll be backed by a 60-day warranty, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down due to its large size. Nonetheless, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nevertheless, they didn’t mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found across the net. Ted has done his very best to guide them in every possible way he can, through easy to understand textual instructions, clear pictures and even videos as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking thoughts and woodworking projects they will find within. Therefore, it’s certainly worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Wood Crafts For Beginners

Woodworking is 1 hobby that can also be a rewarding career if you love to work together with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to build all types of furniture, (beds, table, and chairs), with ease. You can then sell your finished woodworking jobs and make a handsome profit. Wood Crafts For Beginners.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you will be able to build some really nice furniture to you and your family to enjoy. Imagine building a personalized coffee table or grandfather clock and having it sit on your living space. It will be a topic of conversation when you have friends come over to visit. They will ask: How did you make it? How long can it take to complete the project? What kind of tools did you use? Just how on earth did you create such a beautiful item of furniture? As you speak about your work, a feeling of pride will encounter you and don’t be surprised if your friends ask you to create one for them too!

Finding Woodworking Projects and Plans for Beginners Wood Crafts For Beginners

If you are thinking you are just too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it’s ideal for beginners!

Where to begin in Woodworking? Wood Crafts For Beginners.

Begin with a concept in your mind of what you would like to build then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for beginners available for sale from online woodworking retailers. Of course, you can begin with as expansive a woodworking program as you pick. However, the chances are if you begin with a small woodworking project initially, you will have a better chance of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the quantity and variety of wood required, and the required hand tools and power tools to finish the project. Note: A word of warning about buying woodworking tools. Only buy what you want to complete your immediate or upcoming endeavor. This is important especially if you are a beginner and just beginning. Tools are not cheap. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you might not use all that often. When you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry place to work and may need a set of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Wood Crafts For Beginners Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. However, if you are not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking magazines do a story about how to increase your woodworking craft. Whether it’s showing you the way you can apply an end to a completed job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Wood Crafts For Beginners

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking could be fun. If you do not have the right information, instruction, and ability, you may wind up spending more time and money than you initially meant to spend. As a novice woodworker, you want to have space, time and the correct tools. Having said, there are a few essential factors you should remember, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Creating something new with your hands is a special feeling. Do not begin a job if you are not interested, as this may land you at a bad place.

2. Consider the primary reason for making this woodworking project. Choose the uses of the item you’re making.

3. Consider your abilities and examine the time you have, until you start with a project.

4. Start projects that you can complete. If you’re in the midst of some work, then it’s better to not begin any project at all.

How to Become a Master Woodworker From Your Own Home Wood Crafts For Beginners

If you maintain these essential points in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to start with. As a newcomer, always pick a job that has quite a basic construct up or a simple construction. A few simple to begin projects include, bird feeder, chairs, shelves, etc.. As soon as you get hold of the techniques, you could always proceed into the next level of woodworking jobs, such as cupboards, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wood Crafts For Beginners

Tools would be the ways whereby you can win the struggle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be quite convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. Even the workbench, when mended with vises, provide ample space to work. As a primary tool, workbench should be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws available in the marketplace. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly you will find Canadian kinds and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another very important tool which you cannot work without. The measuring tape helps you to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills can make the task much simple.

8. Other small and basic tools – These include pens, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed price on woodworking jobs. Based on the sort of project that you would like to complete, pricing could be determined. The simple the project, the less price it involves. But at the beginning buying the tools will probably be a little hefty. Therefore, it is better to resolve a budget first on the resources, then keyword on the project. Buying the basic tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Directions

Directions are one of the primary things that each and every newcomer should follow. Instructions guide is quite simple to understand the procedure, what to do and the way to get it done. Time also has an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it is crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that would make the work easy. But the most essential thing keyword which will help you to achieve success is proper preparation. With appropriate planning and a plan, it’s possible to achieve success immediately. If you understand the purpose of woodworking, the item you need to construct, the resources you need to possess and the typical time it’s possible to devote every day; then you are ready to go.

Conclusion, Wood Crafts For Beginners

These tips and education will create the woodworking projects and strategies for novices fast to finish. Always ensure that you have all the essential tools, materials, space prepared. Keep the instructions for constructing a product handy. Appropriate strategy and planning can help you to make a great woodworking project for your home.

|

Starting Your First Woodworking Shop Wood Crafts For Beginners

Folks if you’re looking for a way to pass time or want an alternate way to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies people turn to do as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be quite careful when choosing which job to begin with because there are jobs that can be too difficult for a beginner. But don’t worry about that because we will provide you guidelines on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working equipment, therefore before you choose your project you have to know if you’ve got the available resources to work on that project. Try not to invest a lot of money on buying equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will not be any difference between the artistic hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Wood Crafts For Beginners

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking in your home will give you time to research different projects and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various projects.
It’s extremely important that you know more about different types of wood available for creating projects. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood that they use will allow you to prepare the wood you will need for certain projects you may choose to pursue.
Once you know the basics of wood selection and the usage of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good jobs to satisfy your needs.

Wood Crafts For Beginners practice makes perfect so be sure that you practice your work daily if possible. Try out lots of designs using various tools so you can find the hang of working with the tools. When starting out you can earn a range of errors but with time you will find out how to correctly use them and produce quality projects.

|

The Benefits of Woodworking Wood Crafts For Beginners

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may begin on a shoestring with a minimal amount of tools and equipment. A small home workshop may produce a broad array of simple projects which will help you develop your creative and building abilities while rewarding you with practical and artistic wood products which you can enjoy and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to begin with, let’s talk about where you’ll do your woodworking, Depending on the size of your house, you may be able to create a dedicated space into your woodworking tasks. This may be a reserved place on your garage or on your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated shop detached from your house offers one distinct advantage: better dust control. Without complex dust control systems, basement assignments will inevitably create dust which travels to the living area of your house. This is very true in homes with forced air heating systems where cold air returns located in the basement draw up dust into the upper levels of the home. Another benefit of detached workshops would be, clearly, the noise level. It’s possible to work without disturbing the rest of the household. A fantastic compromise might be the garage of your home.

This can help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Wood Crafts For Beginners

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your development, everybody from beginner to expert all wishes they include more space to work in. Wood Crafts For Beginners if you’re able to have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in position from project to project. If this installation is not hopeless, at least try to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the start, establish a seat area where you are able to shop and use the majority of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. That will enable you to work comfortably while standing. Insert a sturdy shelf below the seat to home your hands power tools along with a pegboard over the seat to hang additional gear. Install a woodworking at one end of your seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Crafts For Beginners

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got large financial resources or you are starting on a shoestring consistently purchase quality equipment. If you can afford it, buy your quality tools in your local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality gently used programs out there that belong to individuals who stumbled on that one molding job around the house or received tools as presents that they won’t ever use. You can usually purchase tools for these sellers for under half the original price and save even more money if you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will require extra time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a couple added bucks on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when purchasing large ticket items such as table saws, bandsaws or high finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your skills with your startup set of tools and prevent lamenting about the gear you wished you had.
Here’s a listing of the more useful tools you’ll need to get started:
Safety Equipment: Start as expected with eye protection. Get a nice pair of safety glasses that also offer you some side protection to your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually hamper your vision and influence safety. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next bit of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most employees tire faster when exposed to high sound levels. These can include earplugs or complete ear keyword muff protectors. I find a quality pair of ear muff guards is ideal for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. With this setup I’m protecting my eyes and my ears. I am keeping the dust from my hair. I am good to go!

Power Hand Saw: Often known as a skill saw after the favorite brand name, this may prove to be the most flexible instrument in a startup workshop. In fact, at the hands of a professional, a power hand saw could be used to construct an entire property. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your next job. After choosing the proper saw put in an excellent blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible tool can’t just cut corners. It is ideal for cutting holes in timber too like handle slots. At some point, you’ll want to obtain a band saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill which runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through tough lessons learned, I have found that buying quality, in this case, is more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not need in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop injuries occur. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable handle. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Pick a title brand quality hammer at the 16-ounce range for overall work and also a smaller completing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled head tips. These types of hammers are more suited for rough framing jobs and are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage pretty much any trimming requirements that you have as a beginner woodworker. As your woodworking skills evolve, you will probably update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might find that your palm sander with just a little bit of effort can transform rough looking creations into virtual functions of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an extra supply of 100 grit paper. You’ll get that this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools enable you to taper borders, sew high stains and fix any imperfections in timber bits. {Start with a typical number 4 plane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it normally requires the beginner woodworker a couple of years to collect a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with extended steel shafts, but the structure is still the same. Receive a pair of the longest clamps that you could spend. You may get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of the seat is perfect for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the better vices offer quick release mechanisms that enabled the user to quickly open and close the limbs with no tedious handle rotation. The wood beamed surfaces on your vice will periodically need replacement. I would rather use soft walnut in my vices which will not crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most frequently used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you may not use the tape in these lengths, the larger tape measures provide more rigid tapes which won’t flop around and slip off the ending of planks. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape measures can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are simply too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a set of 12-inch wood files. The cost of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to decide on the very best. I also have discovered over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Wood Crafts For Beginners

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most rudimentary tools and equipment, anyone can learn the profitable skills of his time-tested hobby and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects