Wood For Woodworking Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The bundle has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, himself is also an educator and a member of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because most of the ideas and projects Ted’s source are easy to comprehend and simple. Ted McGrath spent two years researching so that he could gather enough material for a comprehensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to benefit from Ted’s woodworking Package. People that are only getting started will discover the ideas and projects in Ted’s bundle quite simple. Without doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step-by-step directions. Presently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who buy his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking jobs. Woodworkers are going to have the ability to find any job of their choice in this package quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be backed by a 60-day guarantee, so if this woodworking package fails to satisfy them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long time to down because of its large dimensions. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering the fact that this package is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package created by Ted McGrath is really unmatchable and can’t be compared to those other woodworking packages that can be found across the internet. Ted has done his very best to guide them in every possible way he can, through easy to comprehend textual directions, clear pictures and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with all the woodworking ideas and woodworking jobs they will find inside. Therefore, it is certainly worth buying!

The Benefits of Woodworking Wood For Woodworking Projects

Woodworking is 1 hobby that could also be a rewarding profession if you like to work with your hands and construct exquisite pieces of furniture from timber. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to build all kinds of furniture, (table, beds, and chairs), effortlessly. After that you can sell your completed woodworking jobs and make a handsome profit. Wood For Woodworking Projects.

It requires time to become proficient in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you will be able to create some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living room. It’ll be a subject of conversation whenever you have friends come over to see. They’ll ask: How did you make it? How long can it take to finish the project? What type of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you speak about your job, a sense of pride will come over you and also don’t be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Wood For Woodworking Projects

If you’re thinking you are too old or too young for woodworking, think again! You are never too old or too young for such a fun hobby and it’s perfect for beginners!

Where to begin in Woodworking? Wood For Woodworking Projects.

Start with an idea in mind of what you want to construct then get a excellent woodworking project plan that’s geared toward novices. There are numerous small woodworking projects for novices available for sale from online woodworking merchants. A couple of woodworking program suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Of course, you can begin with as expansive a woodworking plan as you pick. However, the chances are if you start out with a small woodworking project initially, you’ll get a better prospect of keyword completing the job.

Your woodworking project plan must include some lists! Lists of: woodworking hardware, the amount and variety of wood required, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about buying woodworking tools. Just buy what you need to finish your immediate or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank buying a great deal of tools you may not utilize all that frequently. If you do buy gear, buy quality. Do a bit of research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting edge angles), a coping saw, complete punches, flat and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the timber ), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and do not forget the wood glue and a brush to spread the wood glue! Of course, you will require a dry area to work and might require a pair of saw horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more innovative hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools that beginners will need. You can always add to your toolbox as you gain experience!

Wood For Woodworking Projects Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to complete your project. But if you are not certain about what to do there is help available! There are lots of areas that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those several woodworking magazines out there. Each month the authors in woodworking publications do a story about the best way best to increase your woodworking craft. When it is showing you how you can apply a finish to a finished project, or how to create a mortise and tenon joint, something new could be learned every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood For Woodworking Projects

If you’re just beginning and very interested in doing a DIY job for home afterward, woodworking can be fun. If you don’t have the right information, education, and ability, you might land up spending more time and money than you originally meant to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having mentioned, there are a couple of essential factors that you should remember, before starting with any woodworking project.

1. If you are a beginner, you must first have to be somewhat interested in woodworking. Making something new with your hands is a special sense. Don’t begin a job if you’re not interested, as this may land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and analyze the time that you have, before you begin with a job.

4. Start projects that you can complete. If you’re in the middle of a work, then it is wise to not start any project at all.

Starting Your First Woodworking Shop Wood For Woodworking Projects

If you keep those vital things in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you get started?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects that you want to begin with. As a newcomer, always select a job that has quite a basic build up or a simple construction. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, such as cupboards, sheds, along with others. Beginning projects should always keyword be less complicated and less bothersome so you have a better comprehension of working with woods and their resources. When the job is selected, start selecting your tools.

Beginners Woodworking Tools, Wood For Woodworking Projects

Tools would be the means whereby you will win the struggle of woodworking. A lot of men and women believe power tools are needs. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is needed for exact cuts and dimensions. Even the workbench, when mended with vises, offer ample space to work. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much easy for you. When you buy a hammer, constantly check the balance between the weight and stand. Always pick a sturdy, yet lightweight item.

3. Saw – A saw is just another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at different sizes. There are various sorts of saws available in the market. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You can also purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. However, this isn’t a tool for novices, but having it would make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the job much simple.

8. Additional small and basic tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed price on woodworking jobs. Dependent on the type of project that you want to finish, pricing could be determined. The easy the project, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Therefore, it is much better to fix a budget first on the resources, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the primary things which every beginner should follow. It is like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and how to get it done. Time also has an important role in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a beginner to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you understand the objective of woodworking, the item that you need to build, the resources you require to own and the average time it’s possible to devote every day; then you are ready to go.

Conclusion, Wood For Woodworking Projects

All these tips and instruction will make the woodworking projects and plans for beginners fast to finish. Always make sure you have all the essential tools, materials, space ready. Keep the instructions for constructing an item handy. Proper strategy and planning can help you to make a great woodworking project for your home.

|

Finding Woodworking Projects and Plans for Beginners Wood For Woodworking Projects

People when looking for a way to pass time or desire an alternate way to generate money they generally turn into a hobby they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It is very exciting to do and everyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you have to be very careful when choosing which job to begin with since there are jobs that can be too difficult for a beginner. But don’t worry about that because we will provide you tips on the ideal means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, therefore before you pick your job you have to be aware of if you’ve got the available resources to work on such a job. Try not to spend a good deal of cash on buying equipment when starting out, buy more equipment as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will be no difference between the hand as well as the normal hands.

The Benefits of Woodworking Wood For Woodworking Projects

Woodworking in your home will provide you time to research different projects and learn so many things. That’s why it’s important to invest less money when starting out so you can manage to make errors and at any time learning about various jobs.
It is very important that you know more about different kinds of wood available for creating projects. Anticipate carpenters use different kinds of wood quality for decorating bits, learning which kind of wood that they use can help you prepare the wood you’ll need for specific projects you might choose to pursue.
Once you understand the fundamentals of wood choice and the usage of different tools now you can implement them in cutting out well wood pieces and putting wood together. Knowing what to do can assist you in creating good jobs to fulfill your needs.

Wood For Woodworking Projects practice makes perfect so be sure you practice your work every day if at all possible. Try out a lot of layouts using a variety of tools so that you may get the hang of using the tools. When starting out you can make a range of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

The Benefits of Woodworking Wood For Woodworking Projects

Woodworking as a hobby can be one of the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimal number of tools and equipment. A small home workshop can produce a wide array of simple projects which will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll do your woodworking, Depending on the size of your home, you may be able to produce a dedicated space into your woodworking activities. This might be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your very first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the home. Another benefit of detached workshops is, of course, the sound level. It’s possible to work without disturbing the rest of the household. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however based on where you reside, a keyword garage layout may not be practical during extremes of hot or cold weather.

The Benefits of Woodworking Wood For Woodworking Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to function in. Wood For Woodworking Projects if you’re able to have a dedicated place for a workshop all the better. Floor gear and bench top gear can stay in place from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and gear. In the beginning, establish a seat area where you are able to shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang additional gear. Put in a woodworking vice at one end of the seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood For Woodworking Projects

The scope of your start-up equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools at the local building and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or alternative regional advertisements. You will find plenty of quality gently used tools out there which belong to individuals who stumbled on that one molding project around the home or received tools as presents which they won’t ever utilize. You can usually purchase tools for all these sellers for less than half the initial price and save even more money should you make a bundle deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and possibly travel expenses. Weigh the advantages of traveling across town to save a few added dollars on a cheap piece of equipment. The excess expense of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum quantity of hand equipment yet produced sophisticated and complex bits. Concentrate on developing your abilities with your startup set of resources and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as expected by eye protection. Get a nice pair of safety glasses that also offer some side protection to your eyes. Purchase a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will gradually impair your vision and affect safety. Avoid wearing goggles at a workshop. Most impair vision and dust up quickly. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be noisy and long-term exposure to these sound levels may affect hearing and lead to tinnitus and other hearing losses. With this setup I am protecting my eyes and my ears. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite brand name, this may end up being the most flexible instrument in a start-up workshop. In fact, at the hands of a professional, a power hand saw could be employed to build an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your next project. After selecting the proper saw install a quality blade. Most skill saws come with a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add excellent flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut corners. It’s ideal for cutting holes in timber too like manage slots. At some point, you’ll want to get a band saw. Bandsaws are even more flexible but a quality floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch chuck within the conventional 3/8 inch model. Down the road, the 1/2 inch version will end up being more versatile. Through hard lessons learned, I have found that buying quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is one annoyance you do not need in your workshop. Purchase an range of superior carbide tipped drill bits which are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its prospective slot in the holder after each use. Lastly, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the 1 instrument where most workshop accidents happen. Even though the most ordinary, hammer injuries are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood handles with inferior joints between the handle and head. The mind usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more appropriate to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander with a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra supply of 100 grit paper. You’ll find that this grade of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are expensive and it normally requires the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Begin with a set of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, but the structure is still the same. Get a pair of the longest clamps that you can afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of your bench is ideal for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with replaceable wooden clamping surfaces and prevent metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the better vices offer quick release mechanisms that enable the user to quickly open and close the jaws with no tedious handle turning. The wood clamping surfaces in your vice will periodically require replacement. I would rather use soft walnut in my vices that will not crush or damage many of the various forests that I utilize. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be among your most often used tools. Buy a good excellent name brand tape measure with a wide tape usually in the 25-foot range. Even though in your shop you might not use the tape in these lengths, the bigger tape measures offer more rigid tapes that will not flop around and slide off the ending of planks. Measuring when you are on your own will be a great deal easier, and of course, quality tape measures can endure for several decades.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a couple other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools will help you in marking the right angles as well as chemical angles. Also, get an range of flat, Robertson and Philips screwdrivers. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. Get a flat one and a round-edged one. You’ll find them ideal for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are created equal. Avoid inexpensive house brands sold as carpenter’s glue. The expense of glue through all your projects is a minor cost consideration. Therefore, it makes sense to decide on the best. I also have found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Wood For Woodworking Projects

The peaceful satisfaction of woodworking is an excellent experience in this era of rushed lives, smartphones, and time-starved careers. With a minimal investment at the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and enjoy job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Projects