Wood Furniture Building Plans | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they are after because all the ideas and projects Ted’s source are easy to understand and easy. Ted McGrath spent two years exploring so he could collect enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking source.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are actually lots of things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. Those who are only getting started will find the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step-by-step instructions. Presently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is they may be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who buy his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a whole lot about woodworking. They will also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to locate any job of their choice in this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who purchase it will be endorsed by a 60-day warranty, so if this woodworking bundle fails to meet them, they always have the ability to get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a slightly long period to down because of its large dimensions. Nonetheless, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, plans and projects in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overrun considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in building.

This woodworking bundle made by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that are available across the net. Ted has done his very best to guide them in every conceivable way he could, through easy to comprehend textual instructions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking projects they will find within. Therefore, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which beginners will need. You can always add to your toolbox as you gain experience!

Wood Furniture Building Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking magazines do a story on how best to increase your woodworking craft. Whether it’s showing you the way to apply a finish to a completed project, or how to create a mortise and tenon joint, something new could be heard each month. Next, is buying instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out the woodworking craft.

|

How to Become a Master Woodworker From Your Own Home Wood Furniture Building Plans

If you’re just beginning and very interested in doing a DIY job for house afterward, woodworking can be fun. If you don’t have the right information, instruction, and skill, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a few essential factors that you should keep in mind, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be very interested in woodworking. Making something new with your hands is a special feeling. Don’t begin a job if you’re not interested, as this may land you in a terrible location.

2. Think of the primary reason for making this woodworking project. Choose the uses of the thing you are making.

3. Consider your abilities and examine the time that you have, until you start with a project.

4. Start jobs which you can complete. If you’re in the middle of a work, then it’s wise to not begin any project in any way.

How to Become a Master Woodworker From Your Own Home Wood Furniture Building Plans

If you maintain these vital things in your mind before you begin a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much because it requires effort. So how do you get started?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to opt for the woodworking projects you want to start with. As a newcomer, always select a project that has a very basic construct up or a simple structure. A few simple to begin projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so that you have a better knowledge of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Furniture Building Plans

Tools would be the means through which you can win the struggle of woodworking. A lot of men and women think that power tools are requires. But for novices, basic hand tools can be quite handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is needed for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make matters much simple for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is just another tool which you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws out there on the marketplace. Choose a size that you can deal with.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Having all of them will help you in advance woodworking. You can also purchase keyword power screwdrivers since they make the job much faster.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they can be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For such projects, you demand a wrench. Nonetheless, this is not a tool for novices, but using it would make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the job much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking jobs. Dependent on the sort of job that you want to finish, pricing can be determined. The simple the project, the less price it involves. But at the very beginning purchasing the tools will be somewhat hefty. Because of this, it’s much better to resolve a budget on the resources, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not need to purchase any more material other than the timber ply.

Time and Directions

Directions are one of the primary things that each and every newcomer should follow. It’s like the woodworking Bible. Instructions manual is quite easy to understand the process, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also plays an important part in the construction of woodworking projects. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper planning. With appropriate planning and a plan, it is possible to achieve success quickly. If you know the objective of woodworking, then the item that you need to build, the resources you require to possess and the typical time you can give every day; then you are all set to go.

Conclusion, Wood Furniture Building Plans

All these strategies and education will create the woodworking projects and plans for beginners fast to complete. Always make sure you have all the vital tools, materials, space prepared. Read the instructions for building a product handy. Proper strategy and preparation will help you to make a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Wood Furniture Building Plans

Folks when trying to find a way to pass time or want an alternative way to make money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to perform as a hobby or home based company. It’s very exciting to do and everyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be very cautious when choosing which job to start out with since you will find jobs which may be too difficult for a newbie. But do not worry about that since we will give you tips on the right means to begin woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your project you need to know whether you’ve got the available resources to work on that job. Try not to invest a good deal of money on buying gear when starting out, purchase more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no gap between the artistic hand as well as the hands.

The Benefits of Woodworking Wood Furniture Building Plans

To keep yourself updated you have to disseminate with different brands tools and forests. Woodworking at home will give you time to research unique projects and learn so many things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at any time learning about various jobs.
It is extremely important you know about different kinds of wood available for creating jobs. Expect carpenters use different kinds of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you’ll need for specific jobs you might want to pursue.
As soon as you know the basics of wood choice and the use of different tools now you can implement them in cutting well wood pieces and placing wood together. Knowing what to do will assist you in building good projects to satisfy your needs.

Wood Furniture Building Plans practice makes perfect so be sure that you practice your work daily if at all possible. Try out a lot of layouts utilizing various tools so that you can find the hang of working with the tools. When starting out you can earn a number of mistakes but with time you will learn how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Wood Furniture Building Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal number of tools and equipment. A small home workshop can generate a broad variety of simple projects that will allow you to develop your creative and building abilities while rewarding you with practical and artistic wood products which you are able to enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let us talk about where you’ll perform your woodworking, based on the size of your home, you may be able to create a dedicated space into your woodworking activities. This might be a reserved place on your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the top levels of the home. Another benefit of detached workshops is, clearly, the noise level. It’s possible to work without disturbing the rest of the family. A fantastic compromise might be the garage of your home.

This can help decrease the problems of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Wood Furniture Building Plans

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they add more space to work in. Wood Furniture Building Plans if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you get more tools and gear. At the start, set up a seat area where you are able to store and use the majority of your equipment, with a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Insert a sturdy shelf below the seat to house your hands power tools along with a pegboard over the seat to hang additional equipment. Put in a woodworking vice at one end of your bench on the front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Furniture Building Plans

The reach of your startup equipment will be largely based on your budget. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then purchase your quality tools at your regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative local ads. You will find an abundance of quality gently used tools out there which belong to individuals who stumbled on that one molding project around the house or received tools as presents that they will never utilize. You can usually purchase tools for all these sellers for under half of the original price and save even more money should you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple added bucks on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimum amount of hand equipment yet generated sophisticated and complex pieces. Concentrate on developing your skills with your start-up set of resources and avoid lamenting about the gear you wished you’d.
Here is a checklist of the more useful tools you’ll need to get started:
Safety Gear: Start as expected with eye protection. Get a decent pair of safety glasses that also offer some side protection to your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You may avoid wearing all of them together in the event that you find them uneasy.

The next bit of critical safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated noise levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. With this setup I’m shielding my eyes and my ears. I’m keeping the dust from my hair. I am good to go!

Power Hand Saw: Frequently known as a skill saw after the popular brand name, this can end up being the most flexible tool in a start-up workshop. In fact, in the hands of a professional, a power hand saw can be used to construct an whole property. At some point, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your second project. After selecting the right saw install a quality blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a copy and install a quality blade with carbide teeth. Start with a hybrid . All these possess a balanced tooth count that works nicely with both crosscuts and ripping.

Power Jig Saw: A jigsaw will add excellent versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot only cut curves. It is perfect for cutting holes in wood too like manage slots. At some point, you’ll want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw can be a good stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slide often. This is 1 annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the store, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop accidents happen. Even though the most frequent, hammer injuries are usually of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The good hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range provide ceramic or metal handles. Cheaper hammers usually have wood grips with poor joints between the head and handle. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and some other with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably upgrade to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll find your palm sander using just a bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough planks with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools allow you to taper borders, flatten high spots and correct any imperfections in timber bits. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you work on them. Unfortunately, good clamps are costly and it usually requires the beginner woodworker a couple of years to collect a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Receive a set of the maximum clamps which you can spend. You may contact them for smaller glue jobs and enlarge them to their full length for larger projects.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enabled the user to quickly open and close the limbs without tedious handle turning. The wood beamed surfaces on your vice will periodically require replacement. I would rather utilize soft walnut in my vices that won’t crush or damage many of the various forests that I work with. Whether I am working in walnut or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be among the most frequently used tools. Buy a fantastic quality name brand tape measure with a broad tape typically from the 25-foot selection. Even though in your store you may not use the tape in these lengths, the bigger tape measures provide more rigid tapes which will not flop around and slip off the end of planks. Assessing when you are by yourself will be a great deal easier, and of course, quality tape steps can endure for several years.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I discover the Robertson format works great for many woodworking projects and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them ideal for rough shaping and repairing small mistakes on the way.

Adhesives: Not all glues are created equal. Stay away from cheap home brands sold as carpenter’s glue. The expense of adhesive through all of your jobs is a little cost consideration. Therefore, it is sensible to go with the best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Wood Furniture Building Plans

The peaceful gratification of woodworking is an excellent adventure in this era of hurried lives, smartphones, and time-starved careers. With a minimum investment at the most rudimentary equipment and tools, everyone can learn the rewarding skills of his time-tested avocation and enjoy project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

List of furniture types

This is a list of furniture types. Furniture includes objects such as tables, chairs, beds, desks, backpacks, dressers, cupboards or electronic devices (video game consoles, computers, TV, etc.). These objects are usually kept in a house or other building to make it suitable or comfortable for living or working in.

Video: Woodworking Tools