Wood Furniture Plans Free | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking when they are after because all the ideas and projects Ted’s resource are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for an extensive package, and he ended up creating a truly’complete’ woodworking source.

Many might still seem unsure whether they should be purchasing Ted’s woodworking Package, despite all the positive traits. The myriad of resources available online make it even more difficult to make the right option. There are in fact many things that place Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those that are just getting started will find the thoughts and projects in Ted’s package quite simple. No doubt, intricate carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s easy step-by-step instructions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it comprises around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers will be able to find any job of their choice within this package quite readily, though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so some found it a bit overwhelming and overpowering. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found throughout the net. Ted has done his very best to direct them in every possible way he can, through easy to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it is definitely worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with list more woodworking hand tools and more woodworking power tools , but the concept is to buy the essential hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Wood Furniture Plans Free Guidance for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re unsure about what to do there is help available! There are several places that beginning woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the authors in woodworking magazines do a story on the best way best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a finished job, or how to make a mortise and tenon joint, something new could be heard each month. Next, is buying educational DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, the way to use a router, the way to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Wood Furniture Plans Free

If you are a beginner and very enthusiastic about doing a DIY project for home then, woodworking can be interesting. If you don’t have the right information, education, and ability, you might land up spending more money and time than you initially intended to spend. As a novice woodworker, you want to have space, time and the correct tools. Having mentioned, there are a couple of essential aspects you need to remember, before starting with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Creating something new with your hands is a particular sense. Do not start a project if you’re not interested, because this might land you in a bad location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your abilities and examine the time that you have, before you begin with a job.

4. Start projects that you can finish. If you are in the midst of some work, then it is better not to start any project in any way.

The Benefits of Woodworking Wood Furniture Plans Free

If you maintain these vital points in mind before beginning a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking projects you wish to start with. As a beginner, always select a project that has a very basic construct up or a simple structure. Some simple to begin projects comprise, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move to the next level of woodworking projects, like cabinets, sheds, and others. Beginning projects should always keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their tools. When the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Wood Furniture Plans Free

Tools are the means whereby you will win the struggle of woodworking. Many people think that power tools are requires. However, for beginners, basic hand tools can be very convenient and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian types and standard flat type. Having all of them will help you ahead of time woodworking. You can also buy keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking projects require fixing repairs and bolts. For these projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill helps you create holes in wood. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, staple gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s not any fixed price on woodworking projects. Based on the type of project that you would like to complete, pricing could be set. The simple the project, the less cost it involves. But at the very beginning purchasing the tools will be a little hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the basic tools will make certain you do not need to buy any more material aside from the timber ply.

Time and Directions

Instructions are among the primary things that every newcomer should follow. Instructions manual is quite simple to understand the procedure, what to do and how to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and so it is necessary for a beginner to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or tricks that would make the work easy. But the most essential thing keyword which can allow you to achieve success is proper planning. With proper planning and a strategy, it is likely to achieve success immediately. If you know the purpose of woodworking, then the thing that you need to build, the tools you need in order to possess and the average time you can devote daily; then you are all set to go.

Conclusion, Wood Furniture Plans Free

These strategies and education will make the woodworking projects and plans for novices quickly to finish. Always make sure that you have all of the vital tools, materials, space ready. Keep the instructions for constructing a product handy. Proper strategy and preparation will help you to make a fantastic woodworking job for your home.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Furniture Plans Free

Folks when trying to find a way to pass time or want an alternate way to generate money they usually turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are a lot of jobs one can consider. When starting out you have to be quite cautious when choosing which project to start out with since you will find jobs which can be too difficult for a newbie. But do not be concerned about that because we are going to give you tips on the ideal way to begin woodworking as a beginner.

The same as any other hobby woodworking demands some working gear, therefore before you pick your job you need to know if you have the available tools to work on that job. Try not to invest a lot of money on buying gear when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the artistic hand and the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Furniture Plans Free

Woodworking at home will give you time to explore different projects and find out a lot of things. That is why it’s important to invest less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s very important you know about different types of wood available for making projects. Expect carpenters use several kinds of wood quality for decorating bits, learning which type of wood that they use will help you prepare the wood you’ll need for certain jobs you may choose to pursue.
As soon as you know the fundamentals of wood selection and the usage of different tools now you can employ them in cutting well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to fulfill your wants.

Wood Furniture Plans Free practice makes perfect so make sure that you practice your work every day if at all possible. Try out lots of designs utilizing various tools so you may find the hang of working with the tools. When starting out you may make a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Furniture Plans Free

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of gear and equipment. A small home workshop can produce a wide variety of simple projects which will help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let us discuss where you will perform your woodworking, Depending on the dimensions of your house, you might have the ability to create a dedicated space into your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your first store. A heated shop detached from your home offers one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust which travels into the living area of your home. This is very true in homes with forced air heating systems where cold air yields found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, clearly, the noise level. It’s possible to work without bothering the remainder of the household. A fantastic compromise could be the garage of your property.

This might help decrease the difficulties of dust and noise, however based on where you live, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Wood Furniture Plans Free

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes they include more space to function in. Wood Furniture Plans Free if you can have a dedicated spot for a workshop all the greater. Floor tools and bench top equipment can stay in position from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable growth as you get more tools and equipment. In the start, set up a bench area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Insert a sturdy shelf beneath the seat to house your hand power tools and a pegboard above the bench to hang other gear. Install a woodworking vice at one end of your seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Furniture Plans Free

The scope of your start-up equipment will be mostly based on your financial plan. Whether you have got large financial resources or you are starting on a shoestring always purchase quality gear. If you can afford it, then buy your quality tools in the regional building and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or other local advertisements. You will find an abundance of quality gently used programs out there that belong to individuals who stumbled on that one molding job around the home or received tools as gifts which they will never utilize. You can usually buy tools for these sellers for less than half the initial price and save even more money if you create a package deal for all their unused equipment. Of course, getting tools from private individuals will take extra time and perhaps travel expenditures. Weigh the advantages of traveling across town to save a couple added bucks on a cheap piece of equipment. The extra cost of travel and time in these situations is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimum quantity of hand equipment yet generated sophisticated and complex bits. Focus on developing your skills with your startup set of resources and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated by eye protection. Get a decent pair of safety glasses that also offer some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of cheaper vinyl pairs will gradually hamper your vision and influence security. Avoid wearing goggles in a workshop. Most impair vision and dust up fast. You may avoid wearing them all together in the event that you find them uneasy.

The next piece of crucial safety gear you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking can be noisy and long-term exposure to these sound levels can affect hearing and lead to tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when exposed to elevated sound levels. Last, wear a cap to keep the dust out of your hair. I prefer a very simple ball cap along with my ear muffs and eye protection. I am keeping the dust out of my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw after the popular brand name, this may end up being the most flexible tool in a start-up workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an entire property. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second project. After choosing the proper saw install an excellent blade. Most skill saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade for a backup and install an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut corners. It is ideal for cutting holes in timber also like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are much more flexible but a excellent floor unit can be costly. A jigsaw may be a good stop gap for the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs on at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and have to be recharged frequently. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is 1 annoyance you don’t need in your workshop. Buy an range of quality carbide tipped drill bits which are stored in a holder labeling each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after every use. Lastly, get a set of hard steel driver bits. Your drill can also be a flexible screwdriver, especially if you selected an 18-volt version.

Hammer: The hammer remains as the most flexible instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop accidents happen. Although the most ordinary, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head typically comes loose and the instrument becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more appropriate to rough framing jobs and are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can handle just about any sanding requirements you’ve got as a novice woodworker. As your woodworking skills evolve, you will probably upgrade to a floor model disk and belt sander. But for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited amounts of surface area. As you embark on your first few projects you’ll discover that your palm sander using a bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in each workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in wood bits. {Begin with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually takes the novice woodworker a couple of years to accumulate a comprehensive set of wood clamps. Start with a set of extended”pipe” clamps. Now the pipe was replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you can afford. You may contact them for smaller adhesive jobs and enlarge them to their full length for larger jobs.

Shop Vice: A store vice installed in the end of your seat is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with replaceable wooden clamping surfaces and prevent metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enabled the user to rapidly open and close the limbs without tedious handle turning. The timber clamping surfaces on your vice will periodically need replacement. I prefer to utilize soft pine in my vices that won’t crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure will be one of your most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape typically in the 25-foot selection. Although in your shop you might not be using the tape in these lengths, the bigger tape measures offer more rigid tapes which won’t flop around and slide off the ending of planks. Measuring when you are on your own will be a great deal simpler, and naturally, quality tape steps can last for many years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are just too rough for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Buy a T-square, place square and rate square. These inexpensive tools can assist you in marking the right angles in addition to chemical angles. Get the number three and two Robertson set. I discover the Robertson format works great for many woodworking jobs and will be the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The expense of adhesive through all your projects is a little cost consideration. Therefore, it makes sense to go with the very best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Wood Furniture Plans Free

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimum investment at the most rudimentary tools and equipment, anyone can learn the profitable abilities of his time-tested hobby and revel in project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood finishing

Wood finishing refers to the process of refining or protecting a wooden surface, especially in the production of furniture where typically it represents between 5 and 30% of manufacturing costs.[1][2]

Finishing is the final step of the manufacturing process that gives wood surfaces desirable characteristics, including enhanced appearance and increased resistance to moisture and other environmental agents. Finishing can also make wood easier to clean[3] and keep it sanitized, sealing pores that can be breeding grounds for bacteria. Finishing can also influence other wood properties, for example tonal qualities of musical instruments and hardness of flooring.[4][5] In addition, finishing provides a way of giving low-value woods the appearance of ones that are expensive and difficult to obtain.

Finishing of wood requires careful planning to ensure that the finished piece looks attractive, performs well in service and meets safety and environmental requirements.[6] Planning for finishing begins with the design of furniture.[6] Care should be taken to ensure that edges of furniture are rounded so they can be adequately coated and are able to resist wear and cracking. Careful attention should also be given to the design and strength of wooden joints to ensure they do not open-up in service and crack the overlying finish.[7] Care should also be taken to eliminate recesses in furniture, which are difficult to finish with some systems, especially UV-cured finishes.[8]

Video: Woodworking Tools