Wood Magazine Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities that allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a couple petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, she’s also an educator and a part of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to start woodworking whenever they are after because all the thoughts and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could collect enough material for an extensive bundle, and he ended up making a really’complete’ woodworking source.

Many may still appear unsure whether they should be purchasing Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it more challenging to make the ideal option. There are in fact many things that set Ted’s woodworking Package besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit out of Ted’s woodworking Package. Those who are just getting started will find the ideas and projects in Ted’s package quite simple. No doubt, intricate carpentry is demanded; however, they will find it really easy to follow Ted’s easy step-by-step directions. Currently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s source is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who purchase his bundle, specifically:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry abilities through the 150 videos.

Excellently Organized

It’s quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will be able to locate any project of their choice within this bundle quite easily, even though there numerous choices.

60-Day Iron Clad Money-back Guarantee

Overall, this product is and those who purchase it will be endorsed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down due to its large size. Nonetheless, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overwhelmed considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the net. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual directions, clear pictures and even videos too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking jobs they will find within. So, it is definitely worth buying!

Finding Woodworking Projects and Plans for Beginners Wood Magazine Projects

Woodworking is 1 hobby that can also be a rewarding career if you love to work together with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll be able to build all kinds of furniture, (table, beds, and chairs), with ease. You can then sell your finished woodworking projects and make a handsome profit. Wood Magazine Projects.

It takes time to become proficient in the craft of woodworking. The nice thing about working up to this expert craftsman degree is you will have the ability to build some really wonderful furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit on your living room. It will be a subject of conversation whenever you have friends come over to see. They’ll ask: How did you make it? Just how long can it take to complete the project? What kind of wood did you use? What kind of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Wood Magazine Projects

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Wood Magazine Projects.

Start with a concept in mind of what you would like to build then get a really good woodworking project plan that is geared toward novices. There are numerous small woodworking projects for novices available for purchase from online woodworking merchants. A few woodworking plan suggestions to get you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to mention a couple. Of course, you can begin with as grand a woodworking program as you choose. On the other hand, the odds are if you start out with a small woodworking job initially, you’ll have a better chance of keyword completing the project.

Your woodworking project plan must include some lists! Length of: woodworking equipment, the quantity and type of wood required, and the required hand tools and power tools to complete the undertaking. Note: A word of warning about purchasing woodworking tools. Only buy what you want to complete your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools are not cheap. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you may not use all that often. If you do buy tools, buy quality. Do a bit of research and compare products. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, finish punches, flat and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the timber ), woodworking straps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and also do not forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry area to work and might need a set of saw horses to operate on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools here, but the concept is to purchase the essential hand and power tools which novices will need. You may always add to your toolbox as you gain experience!

Wood Magazine Projects Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you have purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines out there. Every month the writers in woodworking publications do a story about how to improve your woodworking craft. When it’s showing you the way you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to work with a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Starting Your First Woodworking Shop Wood Magazine Projects

If you’re just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you don’t have the right information, instruction, and skill, you may land up spending more time and money than you initially intended to spend. As a novice woodworker, you want to have time and the correct tools. Having said, there are a few essential aspects that you should remember, before beginning with any woodworking project.

1. If you are a beginner, you must first have to be very interested in woodworking. Making something new with your own hands is a special sense. Do not start a project if you are not interested, as this may land you in a bad place.

2. Consider the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time you have, until you start with a job.

4. Start projects that you’re able to complete. If you’re in the midst of a work, then it is better not to begin any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Magazine Projects

If you maintain these vital points in mind before beginning a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you wish to start with. As a beginner, always select a job that has a very basic build up or a simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always proceed into the next level of woodworking jobs, such as cabinets, sheds, and others. Beginning projects should keyword be complicated and less frustrating so you have a better comprehension of working with forests and their tools. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Wood Magazine Projects

Tools would be the ways whereby you will win the struggle of woodworking. A lot of men and women believe power tools are requires. But for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a key tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make things considerably simple for you. When you buy a hammer, constantly assess the balance between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there on the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Having all of them can help you in advance woodworking. You might even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to quantify wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. However, this isn’t a tool for novices, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the job much simple.

8. Other small and fundamental tools – These include pens, gum, staple chewing, level, erase, first aid kit and shop vac.

Costing and Budget for the Job

There’s no fixed cost on woodworking projects. Based on the type of job you would like to finish, pricing could be determined. The easy the project, the less cost it involves. But at the beginning buying the tools will be a little hefty. Because of this, it’s much better to fix a budget first on the tools, then keyword on the undertaking. Purchasing the fundamental tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Instructions

Instructions are one of the principal things that each and every newcomer should follow. Instructions manual is very easy to understand the process, what to do and the way to get it done. It keyword is a systematic manual for completing the job. Time also plays an important role in the construction of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample amount of time weekly.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that will help you to reach success is proper planning. With proper planning and a strategy, it’s likely to achieve success quickly. If you understand the objective of woodworking, then the item that you need to build, the tools you need to own and the average time it’s possible to devote daily; then you are all set to go.

Conclusion, Wood Magazine Projects

All these strategies and education is likely to make the woodworking projects and plans for beginners quickly to finish. Always make sure you have all the essential tools, materials, space ready. Read the instructions for building a product handy. Proper strategy and preparation will help you to make a fantastic woodworking job for your property.

|

Starting Your First Woodworking Shop Wood Magazine Projects

Folks when looking for a way to pass time or desire an alternative method to generate money they usually turn into a hobby they enjoy. Woodworking is one of the hobbies individuals turn to do as a hobby or home based business. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be quite careful when choosing which job to begin with since there are jobs that can be too tough for a newbie. But don’t be concerned about that since we will provide you guidelines on the right way to begin woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you choose your project you need to be aware of if you’ve got the available resources to work on such a project. Try not to spend a lot of money on buying equipment when starting out, purchase more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll be no difference between the artistic hand as well as the hands.

The Benefits of Woodworking Wood Magazine Projects

Woodworking at home will give you time to explore different jobs and find out so many things. That is why it’s very important to spend less money when starting out so you can manage to make errors and at any time learning about different jobs.
It is extremely important that you know more about the different kinds of wood available for creating jobs. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use will help you prepare the wood you’ll need for specific jobs you may want to pursue.
As soon as you understand the basics of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good projects to satisfy your needs.

Wood Magazine Projects practice makes perfect so be sure you practice your work every day if at all possible. Try out lots of layouts utilizing a variety of tools so you may get the hang of using the tools. When starting out you can make a range of errors but with time you will find out how to properly utilize them and create quality projects.

|

How to Become a Master Woodworker From Your Own Home Wood Magazine Projects

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You may get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can produce a broad variety of simple projects that can allow you to develop your creative and construction abilities while rewarding you with artistic and practical wood products which you are able to appreciate and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you will do your woodworking, based on the dimensions of your home, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your first shop. A heated store detached from your house offers one distinct advantage: better pest management. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels into the living area of your house. This is particularly true in homes with forced air heating systems where cold air returns found in the cellar draw up dust into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. You can work without bothering the remainder of the household. A fantastic compromise could be the garage of your home.

This might help minimize the difficulties of dust and noise, however based on where you live, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Wood Magazine Projects

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to function in. Wood Magazine Projects if you can have a dedicated spot for a workshop all the better. Floor tools and bench top gear can stay in place from project to project. If this installation is not impossible, at least try to make a chair area where equipment could be saved and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the beginning, establish a seat area where you can shop and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will enable you to work comfortably while standing. Add a sturdy shelf beneath the bench to home your hands power tools along with a pegboard above the bench to hang additional gear. Install a woodworking at one end of the bench on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Magazine Projects

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always purchase quality equipment. If you can afford it, buy your quality tools in the regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or alternative local advertisements. There are plenty of quality lightly used tools out there which belong to people who stumbled on that 1 molding project around the house or received tools as gifts which they won’t ever utilize. You can usually purchase tools for these sellers for less than half the initial price and save even more money if you make a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take extra time and perhaps travel expenses. Weigh the benefits of traveling across town to save a few added bucks on a inexpensive piece of gear. The excess cost of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or high ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand equipment yet generated sophisticated and intricate bits. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses that also offer you some side protection for your eyes. Buy a quality acrylic set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and influence security. Avoid wearing goggles at a workshop. Most impair vision and dust up fast. You can avoid wearing all of them together if you find them uneasy.

The next bit of crucial safety equipment you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire faster when subjected to high noise levels. Select powerful hearing protection that you find comfortable and effective. These may include earplugs or complete ear keyword muff protectors. I find that a excellent set of ear muff protectors is perfect for hearing protection.

Lastly, put on a cap to keep the dust out of your hair. I prefer a very simple ball cap with my ear muffs and eye protection. I’m keeping the dust out of my hair. I’m good to go!

Power Hand Saw: Frequently referred to as a skill saw after the favorite name, this can prove to be the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to build an entire property. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get a quality brand saw. Stay away from cheap unknown brands. These are inclined to cut back and will burn out before you even start your second project. After choosing the proper saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is where the jigsaw excels. This flexible instrument can’t only cut corners. It is ideal for cutting holes in wood also like handle slots. At some point, you’re going to want to obtain a band saw. Bandsaws are even more versatile but a excellent floor unit can be costly. A jigsaw may be a fantastic stop gap to the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill that runs at least 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the conventional 3/8 inch model. Down the street, the 1/2 inch version will prove to be more versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is 1 annoyance you don’t need in your workshop. Purchase an assortment of superior carbide tipped drill bits which are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot at the holder after each use. Last, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop injuries happen. Even though the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are precisely machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Most hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce scope for general work and a smaller finishing hammer for more complex work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more appropriate for rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage pretty much any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you will probably update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up borders, cross cuts and perhaps even limited amounts of surface space. As you embark on your first few projects you might discover your palm sander with just a little bit of effort can transform rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in timber pieces. {Begin with a typical number 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold off your wood bits as you work on them. Unfortunately, good clamps are costly and it usually takes the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Begin with a set of extended”pipe” clamps. Today the pipe has been replaced with long steel shafts, but the structure remains the same. Get a pair of the longest clamps which you could spend. You can get in touch with them for smaller adhesive jobs and enlarge them to their full length for bigger projects.

Shop Vice: A store vice installed in the end of the bench is perfect for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no dull handle turning. The wood beamed surfaces in your vice will occasionally require replacement. I would rather use soft pine in my vices that will not crush or damage many of the different forests that I work with. Whether I am working in soft pine or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be among your most often used tools. Purchase a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Although in your shop you may not use the tape at these spans, the larger tape steps provide more rigid tapes that will not flop around and slip off the ending of boards. Assessing when you are by yourself will be a lot simpler, and naturally, quality tape measures can endure for several years.

When marking projects, I favor a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools will assist you in marking the ideal angles in addition to chemical angles. Get the number two and three Robertson set. I find the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing little mistakes on the way.

Adhesives: Not many glues are created equal. Avoid cheap home brands sold as carpenter’s glue. The cost of glue through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the very best. I have also found over the years that I get the best results with both indoor and outdoor jobs once I use quality outdoor grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Wood Magazine Projects

The peaceful satisfaction of woodworking is an excellent experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Wood (magazine)

Wood is a magazine catering to the home and hobby woodworker with more than 350,000 subscribers. It publishes seven regular issues annually (December/January, March, May, July, September, October, and November). It has the highest circulation of any woodworking magazine in the world.

Wood was founded in 1984 on the principle of the Better Homes and Gardens Test Kitchen, where no recipe goes into the magazine before it's tested. For woodworkers, that means that every project in the magazine has been built in Wood's own woodworking shop; every woodworking technique published has been tried and accomplished by the editors; and every tool or product that appears in the pages of the magazine has been shop-tested and its performance evaluated.

There have only been three editors-in-chief in Wood's history. Founder Larry Clayton retired in 2000 (after issue 132, April 2001), his successor Bill Krier retired in April 2012, after which Dave Campbell took over at the helm. Its editorial and advertising offices are in Des Moines, Iowa.[1]

Video: Woodworking Tools