Wood Making Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this revolutionary bundle, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re after because all the ideas and jobs Ted’s source are easy to comprehend and simple. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are actually lots of things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s package quite easy. No doubt, complicated carpentry is involved; however, they will find it really simple to follow Ted’s simple step-by-step instructions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses into the woodworkers who purchase his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource which helps beginners learn a whole lot about woodworking. They’ll also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to locate any job of their choice in this bundle quite readily, even though there numerous choices.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long time to down due to its large size. Nonetheless, using a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to all those other woodworking packages that can be found across the internet. Ted has done his very best to direct them in every possible way he can, through simple to understand textual instructions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking projects they will find inside. So, it’s definitely worth buying!

How to Become a Master Woodworker From Your Own Home Wood Making Plans

Woodworking is one hobby that can also be a rewarding profession if you like to work together with your hands and construct beautiful pieces of furniture from wood. When you learn that the woodworking crafts and eventually become a nice woodworking craftsman, you will have the ability to build all types of furniture, (table, beds, and chairs), with ease. You can then sell your completed woodworking jobs and make a handsome profit. Wood Making Plans.

It requires time to become skilled at the craft of woodworking. The wonderful thing about working up to that expert craftsman degree is you will have the ability to build some really nice furniture to you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It will be a subject of conversation whenever you have friends come over to visit. They will ask: How can you create it? How long did it take to complete the job? What kind of wood did you use? What type of tools did you use? Just how on earth did you make such a beautiful piece of furniture? As you speak about your work, a feeling of pride will come over you and also do not be surprised if your friends ask you to create one for them too!

Starting Your First Woodworking Shop Wood Making Plans

If you’re thinking you are too old or too young for woodworking, then think again! You are never too old or too young for such an enjoyable hobby and it is ideal for beginners!

Where to Begin in Woodworking? Wood Making Plans.

Start with a concept in mind of what you want to build then get a really good woodworking project plan that is geared toward beginners. There are several little woodworking projects for novices available for sale from online woodworking merchants. Obviously, you can start out with as expansive a woodworking program as you choose. On the other hand, the odds are if you begin with a small woodworking project at first, you will have a better prospect of keyword completing the project.

Your woodworking project plan should incorporate some lists! Lists of: woodworking hardware, the quantity and variety of wood needed, and the required hand tools and power tools to finish the undertaking. Note: A word of caution about purchasing woodworking tools. Just buy what you need to complete your immediate or upcoming endeavor. This is important especially if you are a beginner and just starting out. Tools are not cheap. The beginner needs good woodworking gear, but you can easily break the bank purchasing a great deal of tools you might not utilize all that often. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you can afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking clamps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also don’t overlook that the wood glue and a brush to spread the wood adhesive! Obviously, you will require a dry area to work and might need a pair of horses to work on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of substance and level out bigger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and off with list more woodworking hand tools and more woodworking power tools here, but the concept is to buy the essential hand and power tools that beginners will need. You may always increase your toolbox as you get experience!

Wood Making Plans Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and techniques to complete your project. But if you’re unsure about what to do there is help available! There are lots of places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Each month the authors in woodworking publications do a story on how best to improve your woodworking craft. Whether it’s showing you how to apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be heard every month. Next, is buying educational DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Making Plans

If you are just beginning and very enthusiastic about doing a DIY job for house afterward, woodworking could be fun. If you don’t have the proper information, education, and skill, you may wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a couple of essential aspects that you need to keep in mind, before starting with any woodworking project.

1. If you are just beginning, you must first need to be very interested in woodworking. Making something new with your own hands is a special feeling. Do not start a job if you are not interested, because this might land you at a terrible location.

2. Consider the primary reason behind creating this woodworking project. Choose the uses of the thing you’re making.

3. Consider your abilities and examine the time that you have, before you start with a job.

4. Start jobs which you can complete. If you’re in the middle of a work, then it is wise to not start any project in any way.

The Benefits of Woodworking Wood Making Plans

If you maintain those vital things in your mind before beginning a woodworking project, it is going to become very easy for you to achieve success. Woodwork requires planning as much as it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is essential to choose the woodworking projects you want to start with. As a beginner, always pick a job which has a very basic build up or a simple structure. Some simple to start projects include, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always proceed into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their tools. Once the job is selected, begin selecting your own tools.

Beginners Woodworking Tools, Wood Making Plans

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women believe power tools are needs. But for novices, basic hand tools can be very handy and more than helpful in completing a project. If woodworking is your hobby, then a few tools that you would require would be:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer can make things considerably easy for you. When you purchase a hammer, always assess the equilibrium between the weight and stand. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are various sorts of saws available on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them can help you ahead of time woodworking. You might even buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool that you cannot work without. The measuring tape gives you the capacity to measure wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this isn’t a tool for beginners, but using it would make work easier for you in a subsequent stage.

7. Drill – Drill makes it possible to make holes in timber. Power drills are more helpful but they cost more. Low wattage power drills can make the task much simple.

8. Other small and fundamental tools – These include pencils, gum, basic chewing, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There is no fixed price on woodworking jobs. Based on the type of project you want to finish, pricing could be determined. The simple the project, the less price it involves. But at the very beginning buying the tools will probably be a little hefty. Therefore, it’s better to resolve a budget on the resources, then keyword on the project. Purchasing the fundamental tools will make certain you do not have to purchase any more material aside from the wood ply.

Time and Directions

Directions are among the principal things that each and every newcomer should follow. Instructions manual is very easy to understand the procedure, what to do and the way to get it done. It keyword is a systematic guide for completing the job. Time also plays a significant role in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample quantity of time every week.

Ideas for Beginners

There are no quick tips or suggestions that will make the work easy. But the most essential thing keyword that will help you to reach success is proper preparation. With proper planning and a plan, it is likely to achieve success immediately. If you know the purpose of woodworking, the item that you need to build, the resources you require to own and the average time you can devote daily; then you’re ready to go.

Conclusion, Wood Making Plans

These tips and education will create the woodworking projects and strategies for beginners fast to finish. Always ensure that you have all of the essential tools, materials, space prepared. Keep the instructions for constructing an item handy. Proper strategy and planning can help you to make a fantastic woodworking job for your home.

|

The Benefits of Woodworking Wood Making Plans

Folks if you’re looking for a way to pass time or desire an alternate way to make money they usually turn into a hobby they enjoy. It’s very exciting to do and everyone can get started.

When doing woodworking in your home there are lots of jobs one can think of. When starting out you need to be very careful when choosing which project to start out with because you will find projects which may be too difficult for a newbie. But do not worry about that since we will provide you tips on the right way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you pick your job you have to know if you’ve got the available tools to work on that job. Try not to spend a lot of money on buying gear when starting out, purchase more equipment as you get more experience and become a professional carpenter. If you enjoy your hobby then there’ll be no difference between the hand and the hands.

The Benefits of Woodworking Wood Making Plans

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking at home will give you time to research different jobs and find out a lot of things. That’s why it’s important to spend less money when starting out so you can afford to make mistakes and at some time learning about different projects.
It’s extremely important you know about different kinds of wood available for creating projects. Anticipate carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use will help you prepare the wood you’ll need for specific jobs you might want to pursue.
Once you understand the basics of wood choice and the use of different tools you can now implement them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to fulfill your wants.

Wood Making Plans practice makes perfect so make sure that you practice your work every day if at all possible. Try out a lot of designs utilizing various tools so you can find the hang of working with the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Making Plans

Woodworking as a hobby may be among the most rewarding experiences you’ll ever appreciate. You may get started on a shoestring with a minimum number of gear and equipment. A small home workshop may generate a wide variety of simple projects that can allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products which you are able to enjoy and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let’s talk about where you’ll do your woodworking, based on the size of your home, you may be able to create a dedicated space to your woodworking activities. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be ideal to prepare your very first store. A heated store detached from your house offers one distinct advantage: better dust control. Without sophisticated dust control methods, basement workshops will inevitably create dust which travels into the living area of your house. This is very true in homes with forced air heating systems in which cold air returns located in the basement draw dust up into the top levels of the house. Another advantage of detached workshops would be, clearly, the sound level. You can work without bothering the remainder of the household. A good compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you reside, a keyword garage layout might not be practical during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Wood Making Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they include more space to function in. Wood Making Plans if you’re able to have a dedicated spot for a workshop all the greater. Floor tools and bench top gear can stay in position from project to project. If this installation is not hopeless, at least attempt to make a chair area where equipment could be saved and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and equipment. At the start, set up a bench area where you can store and use most of your equipment, with a temporary expansion of your actions onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. This will let you work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hands power tools and a pegboard above the bench to hang additional gear. Install a woodworking vice at one end of your seat on the front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Making Plans

The reach of your start-up equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools at your regional construction and hardware centre. If your budget is tight buy quality used tools from the others through Kijiji or other local advertisements. You will find plenty of quality lightly used tools out there which belong to people who embarked on that 1 molding job around the home or received tools as presents which they will never utilize. You can usually buy tools for these sellers for under half the initial cost and save even more money should you create a package deal for all their unused equipment. Obviously, acquiring tools from private people will take additional time and perhaps travel expenditures. Weigh the benefits of traveling across town to save a few extra bucks on a inexpensive piece of equipment. The excess expense of travel and time in these situations is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times proficient employees worked with a minimum amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your startup set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of thinner plastic pairs will gradually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of crucial safety equipment you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker however is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to these sound levels can affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap with my ear muffs and eye protection. With this set up I am protecting my eyes and my ears. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw after the favorite brand name, this can end up being the most flexible instrument in a start-up workshop. In fact, at the hands of an expert, a power hand saw could be used to build an whole property. As mentioned earlier get a quality manufacturer saw. Avoid cheap unknown brands. All these tend to cut inaccurately and will burn out before you even start your next job. After choosing the proper saw put in an excellent blade. Most saws include a starter blade of lower quality even if they’re a fantastic saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t only cut curves. It is perfect for cutting holes in wood too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are even more flexible but a quality floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch version. Through tough lessons learned, I have found that buying quality, in this scenario, is much more crucial than ever. Cheaper drills have a tendency to get very short run times and have to be recharged frequently. Their battery life tends to be bad and to make things worse keyless chucks come loose and slide often. This is 1 annoyance you don’t need on your workshop. Buy an range of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a flexible screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile instrument in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one instrument where most workshop accidents happen. Although the most ordinary, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary reduction of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a cheap hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable handle. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The head usually comes loose and the instrument becomes useless. Select a title brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing jobs and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking skills evolve, you’ll probably update to a floor version disk and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on your first few projects you’ll discover that your palm sander using just a little bit of effort can transform rough looking creations into virtual works of art! It is possible to use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this caliber of paper the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Though low tech in concept, these tools allow you to taper edges, flatten high spots and correct any imperfections in wood pieces. {Start with a typical amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold off your wood bits as you work on them. Unfortunately, superior clamps are expensive and it usually takes the beginner woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a set of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can spend. You can contact them for smaller glue jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed in the end of your bench is perfect for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their wood clamping surfaces can securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the user to quickly open and close the limbs without tedious handle turning. The wood beamed surfaces on your vice will periodically require replacement. I prefer to use soft pine in my vices which won’t crush or damage many of the various forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be one of the most frequently used tools. Purchase a good excellent name brand tape measure with a broad tape usually from the 25-foot range. Although in your shop you might not be using the tape at these lengths, the larger tape measures offer more rigid tapes that won’t flop around and slide off the ending of boards. Assessing when you are by yourself will be a great deal simpler, and of course, quality tape measures can endure for many decades.

When marking jobs, I prefer a sharp good old-fashioned HB pencil. An HB pen will generate a nice mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for precise measurement in the workshop.

Additional Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Purchase a T-square, place square and speed square. These inexpensive tools can help you in marking the right angles as well as chemical angles. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not many glues are made equal. Avoid cheap home brands sold as carpenter’s glue. The cost of glue through all your projects is a little cost consideration. Therefore, it makes sense to decide on the best. I also have discovered over time that I get the best results with both indoor and outdoor jobs when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Wood Making Plans

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools