Wood Plank Projects | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Package Includes a varied selection of 16,000 simple ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking when they’re after because all the ideas and jobs Ted’s source are easy to comprehend and easy. Ted McGrath spent two years researching so he could collect enough material for a comprehensive package, and he ended up creating a really’complete’ woodworking source.

Many may still appear unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more difficult to make the right option. There are actually lots of things that place Ted’s woodworking Package apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will get to benefit out of Ted’s woodworking Package. People that are only getting started will find the thoughts and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is demanded; however, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Presently, both beginner and experienced ones are using Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s source is that they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses to the woodworkers who purchase his package, specifically:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized even though it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to find any job of their choice in this bundle quite readily, though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it will be endorsed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Nonetheless, with a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they didn’t mind being overwhelmed considering how this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s woodworking bundle is so comprehensive and vast it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking packages that can be found across the net. Ted has done his best to direct them in every possible way he could, through easy to understand textual directions, clear images and even videos too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools , but the idea is to purchase the crucial hand and power tools which novices will need. You can always increase your toolbox as you gain experience!

Wood Plank Projects Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to finish your project. But if you are unsure about what to do there is help available! There are several places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the authors in woodworking magazines do a story about the best way to improve your woodworking craft. Whether it’s showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be heard each month. Next, is purchasing instructional DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: mastering your table saw, how to use a router, the way to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Plank Projects

If you are a beginner and very interested in doing a DIY project for house then, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you might wind up spending more time and money than you initially meant to spend. As a beginner woodworker, you need to have time and the appropriate tools. Having mentioned, there are a few essential factors that you should remember, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be somewhat interested in woodworking. Creating something new with your own hands is a special feeling. Do not begin a job if you’re not interested, as this may land you at a terrible place.

2. Consider the main reason behind making this woodworking project. Choose the uses of this item you’re making.

3. Consider your abilities and examine the time you have, before you begin with a job.

4. Start projects that you’re able to finish. If you’re in the middle of some work, then it is better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Wood Plank Projects

If you maintain these vital points in mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how can you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to choose the woodworking jobs you wish to begin with. As a newcomer, always pick a project that has quite a basic build up or a very simple structure. Some simple to start projects comprise, bird feeder, benches, shelves, etc.. The moment you get hold of these techniques, you could always move into the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning jobs should always keyword be less complicated and less frustrating so you have a better knowledge of working with forests and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wood Plank Projects

Tools would be the ways through which you can win the battle of woodworking. A lot of people believe power tools are requires. But for novices, basic hand tools can be very convenient and more than helpful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is needed for precise cuts and dimensions. Even the workbench, when fixed with vises, provide ample space to work. As a primary tool, workbench should be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is also a vital tool for woodworks. It helps you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters considerably simple for you. When you purchase a hammer, always assess the balance between the weight and stand. Always select a sturdy, yet lightweight product.

3. Saw – A saw is another tool which you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are various sorts of saws out there on the market. Choose a size that you could handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them will help you in advance woodworking. You might even buy keyword power screwdrivers since they make the job much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape gives you the capacity to quantify wood before they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. However, this is not a tool for novices, but having it would make work easier for you in a later stage.

7. Drill – Drill helps you create holes in wood. Power drills are more helpful but they cost more. Low wattage power drills can make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s not any fixed price on woodworking projects. Dependent on the sort of job you would like to finish, pricing could be set. The easy the project, the less cost it involves. However, at the very beginning purchasing the tools will be a little hefty. Therefore, it is much better to resolve a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will make certain you do not have to buy any more material aside from the wood ply.

Time and Instructions

Directions are among the principal things which every beginner should follow. It’s like the woodworking Bible. Instructions manual is very easy to understand the process, what to do and how to get it done. Time also has a significant part in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a novice to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that will make the work easy. But the most essential thing keyword which can allow you to reach success is proper preparation. With proper planning and a plan, it is possible to achieve success immediately. If you know the objective of woodworking, the item that you need to construct, the resources you need in order to possess and the typical time you can devote daily; then you’re all set to go.

Conclusion, Wood Plank Projects

These tips and education will create the woodworking projects and strategies for novices fast to finish. Always ensure you have all the vital tools, materials, area ready. Keep the instructions for building an item handy. Proper strategy and planning can allow you to earn a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Wood Plank Projects

Folks when trying to find a way to pass time or want an alternate method to generate money they usually turn to a hobby that they enjoy. Woodworking is one of those hobbies people turn to perform as a hobby or home based company. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you need to be very cautious when choosing which job to start out with since you will find projects that can be too tough for a beginner. But do not worry about that because we will provide you tips on the right way to start woodworking as a newcomer.

Just like any other hobby woodworking demands some working gear, therefore before you pick your project you need to know whether you’ve got the available tools to work on that job. Try not to invest a lot of money on purchasing gear when starting out, purchase more gear as you get more experience and become an expert carpenter. If you enjoy your hobby then there will be no gap between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Wood Plank Projects

To keep yourself updated you must disseminate with different brands tools and woods. Woodworking at home will provide you time to research unique jobs and learn so many things. That is why it’s very important to invest less money when starting out so you can afford to make errors and at some time learning about various jobs.
It’s very important that you know more about the different types of wood available for making projects. Anticipate carpenters use several kinds of wood quality for decorating pieces, learning what type of wood that they use will allow you to prepare the wood you will need for specific jobs you might choose to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can help you in creating good projects to fulfill your needs.

Wood Plank Projects practice makes perfect so make sure that you practice your work every day if possible. Try out lots of designs using various tools so that you may get the hang of working with the tools. When starting out you may make a number of mistakes but with time you will learn how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Plank Projects

Woodworking as a hobby may be one of the most rewarding experiences you will ever appreciate. You may begin on a shoestring with a minimal number of tools and equipment. A little home workshop can produce a broad variety of simple projects that will allow you to develop your creative and building skills while rewarding you with artistic and practical wood products that you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you should begin with, let’s talk about where you will perform your woodworking, based on the size of your house, you might be able to create a dedicated space into your woodworking tasks. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to set up your first shop. A heated shop detached from your home provides one distinct advantage: better pest management. Without sophisticated dust control systems, basement workshops will inevitably create dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air returns located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the sound level. It’s possible to work without disturbing the rest of the family. A good compromise could be the garage of your property.

This might help decrease the difficulties of dust and noise, however depending on where you reside, a keyword garage layout might not be sensible during extremes of cold or hot weather.

Starting Your First Woodworking Shop Wood Plank Projects

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they include more space to work in. Wood Plank Projects if you’re able to have a dedicated spot for a marathon all the better. Floor tools and bench top gear can remain in place from project to project. If this setup isn’t impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If at all possible plan for inevitable expansion as you acquire more tools and gear. In the start, set up a seat area where you can store and use most of your equipment, using a temporary expansion of your activities onto the garage or basement floor.

A rudimentary workbench can be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be around waist height. This will enable you to work comfortably while standing. Add a sturdy shelf below the seat to house your hands power tools and a pegboard over the bench to hang other equipment. Put in a woodworking vice at one end of your bench on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Plank Projects

The reach of your startup equipment will be mostly based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality gear. If you can afford it, then purchase your quality tools in your regional building and hardware center. If your budget is tight buy quality used tools from the others through Kijiji or other regional ads. There are an abundance of quality lightly used programs out there that belong to individuals who stumbled on that 1 molding job around the house or received tools as presents that they will never use. You can usually buy tools for all these sellers for under half of the original cost and save even more money if you make a package deal for all their unused equipment. Of course, getting tools from private individuals will take additional time and perhaps travel expenses. Weigh the advantages of traveling across town to save a couple added dollars on a cheap piece of gear. The extra cost of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools like surface planers later on.
For smaller acquisitions, a visit to your construction center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked using a minimum quantity of hand gear yet produced sophisticated and complex bits. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as anticipated with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality oil set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually hamper your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together if you find them uneasy.

The next piece of crucial safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as crucial as eye protection. Woodworking may be long-term and noisy exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to elevated sound levels. Select powerful hearing protection that you find comfortable and effective. These can contain earplugs or full ear keyword muff protectors. I find a excellent set of ear muff protectors is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I’m protecting my eyes and my ears. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may end up being the most flexible tool in a startup workshop. In reality, in the hands of an expert, a power hand saw could be employed to build an whole property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned earlier get an excellent brand saw. Avoid cheap unknown brands. These tend to cut back and will burn out before you start your next project. After selecting the right saw put in an excellent blade. Most skill saws include a starter blade of lower quality even if they’re a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Start with a hybrid .

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t just cut corners. It is perfect for cutting holes in wood too like handle slots. Eventually, you’ll want to get a band saw. Bandsaws are even more versatile but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Down the street, the 1/2 inch version will prove to be versatile. Through hard lessons learned, I have found that purchasing quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slide frequently. This is one annoyance you don’t want in your workshop. Buy an range of superior carbide tipped drill bits that are stored in a holder labeling each drill bit size. Make a habit of returning each drill bit to its prospective slot in the holder after every use. Last, get a set of tough steel driver bits. Your drill can also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most flexible instrument in the shop, and often the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries occur. Even though the most ordinary, hammer accidents are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high tech range offer ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Pick a name brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and some other with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This little power tool can manage just about any sanding requirements you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and even limited amounts of surface space. As you embark on your first few projects you might find your palm sander with just a little bit of effort can transform rough looking inventions into virtual works of art! It is possible to use your palm sander to sand and shape rough planks with 100 grit paper and later finish your job with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this grade of paper that the most versatile in your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Though low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood pieces. {Begin with a typical amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to collect a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe has been replaced with long steel shafts, however, the structure remains the same. Receive a set of the longest clamps that you could afford. You can contact them for smaller glue jobs and expand them to their entire length for bigger projects.

Shop Vice: A store vice installed at the end of the seat is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and prevent metal functioning vices with metal jaws. Woodworking vices with their timber clamping surfaces may securely hold wood bits without marring or damaging them. Many of the better vices offer quick release mechanisms that enable the user to rapidly open and close the jaws without dull handle turning. The wood beamed surfaces on your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices that will not crush or damage many of the various forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot range. Even though in your store you might not use the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slip off the end of planks. Measuring when you are by yourself will be a great deal simpler, and of course, quality tape steps can last for many decades.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pencils like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their large flat leads are simply too coarse for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles in addition to compound angles. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking jobs and will be the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood documents. Get a flat one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes on the way.

Adhesives: Not many glues are created equal. Avoid inexpensive house brands marketed as carpenter’s glue. The cost of adhesive through all of your jobs is a little cost consideration. For that reason, it is sensible to go with the very best. I also have found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, will not break down and neglect with moisture.

CONCLUSION, Wood Plank Projects

The peaceful gratification of woodworking is an excellent adventure in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most basic equipment and tools, anyone can learn the profitable skills of his time-tested avocation and revel in project after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Plank (wood)

A plank is timber that is flat, elongated, and rectangular with parallel faces that are higher and longer than wide. Used primarily in carpentry, planks are critical in the construction of ships, houses, bridges, and many other structures.[1] Planks also serve as supports to form shelves and tables.

Usually made from sawed timber, planks are usually more than 1 1⁄2 in (38 mm) thick, and are generally wider than 2 1⁄2 in (64 mm). In the United States, planks can be any length and are generally a minimum of 2 in (51 mm) deep by 8 in (200 mm) wide, but planks that are 2 in (51 mm) by 10 in (250 mm) and 2 in (51 mm) by 12 in (300 mm) are more commonly stocked by lumber retailers. Planks are often used as a work surface on elevated scaffolding, and need to be wide enough to provide strength without breaking when walked on. The wood is categorized as a board if its width is less than 2 1⁄2 in (64 mm), and its thickness is less than 1 1⁄2 in (38 mm).

The plank was the basis of maritime transport: wood floats on water, and abundant forests meant wooden logs could be easily obtained and processed, making planks the primary material in ship building. However, since the 20th century, wood has largely been supplanted in ship construction by iron and steel, to decrease cost and improve durability.[2]

Video: Woodworking Tools