Wood Projects For Adults | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable ideas and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a couple petty drawbacks will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative bundle, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they’re after because all the thoughts and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive package, and he ended up creating a really’complete’ woodworking source.

Many might still seem unsure whether they need to be buying Ted’s woodworking Package, despite all the positive traits. The plethora of resources available online make it more difficult to make the right choice. There are actually many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all degrees will be able to benefit from Ted’s woodworking Package. People who are only getting started will discover the ideas and jobs in Ted’s package quite easy. Without doubt, intricate carpentry is involved; however, they will discover that it’s really simple to follow Ted’s easy step-by-step instructions. Presently, both novice and seasoned ones are using Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page resource that will help beginners learn a lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently coordinated even though it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will be able to locate any job of their choice in this package quite readily, though there so many options.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking package fails to meet them, they always have the ability to get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down because of its large size. Yet, using a high-speed internet connection it should download in a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, plans and projects at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast it contains just about every woodworking project a woodworker might be considering building.

This woodworking bundle created by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that are available across the internet. Ted has done his best to direct them in every conceivable way he can, through easy to comprehend textual instructions, clear pictures and even videos as well.

Therefore, woodworkers who buy Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find within. Therefore, it’s certainly worth buying!

The Benefits of Woodworking Wood Projects For Adults

Woodworking is 1 hobby that can also be a rewarding career if you love to work with your hands and build exquisite pieces of furniture from wood. When you learn the woodworking crafts and become a fine woodworking craftsman, you will have the ability to construct all kinds of furniture, (beds, table, and chairs), with ease. You can then sell your completed woodworking projects and make a handsome profit. Wood Projects For Adults.

It requires time to become proficient at the craft of woodworking. The wonderful thing about working up to this expert craftsman degree is you’ll have the ability to create some really nice furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It will be a topic of conversation when you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking programs? Just how long did it take to finish the job? What type of wood did you use? What kind of tools did you use? How on earth did you create such a beautiful item of furniture? As you speak about your work, a sense of pride will come over you and do not be surprised if your friends ask you to make one for them too!

How to Become a Master Woodworker From Your Own Home Wood Projects For Adults

If you’re thinking you are just too old or too young for woodworking, think again! You’re never too old or too young for such an enjoyable hobby and it’s perfect for beginners!

Where to Begin in Woodworking? Wood Projects For Adults.

Begin with an idea in mind of what you would like to construct then get a excellent woodworking project plan that’s geared toward beginners. There are numerous small woodworking projects for novices available for sale from online woodworking retailers. Obviously, you can start out with as grand a woodworking plan as you choose. On the other hand, the chances are if you begin using a little woodworking job initially, you will have a better prospect of keyword finishing the job.

Your woodworking project plan should include some lists! Lists of: woodworking hardware, the amount and type of wood required, and the required hand tools and power tools to finish the project. Note: A word of caution about purchasing woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just starting out. Tools aren’t affordable. The newcomer needs good woodworking gear, but you can easily break the bank purchasing a lot of tools you may not use all that often. If you do buy gear, buy quality. Do a bit of research and compare products. Buy the best that you can afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, flat and straight tip screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking straps, a wood vise, a seat airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood adhesive! Of course, you’ll require a dry area to work and might need a set of horses to operate on.

Here is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger amounts of material and level out larger surfaces), an orbital finish sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools here, but the idea is to buy the essential hand and power tools that beginners will need. You may always add to your arsenal as you gain experience!

Wood Projects For Adults Advice for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, so you’ve bought your woodworking project plan and you’re really excited to start using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to complete your project. But if you’re not certain about what to do there is help available! There are lots of areas that starting woodworkers can learn about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Each month the writers in woodworking publications do a story on how best to improve your woodworking craft. When it is showing you how you can apply an end to a completed job, or how to create a mortise and tenon joint, something new could be learned each month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to work with a router, the way to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Finding Woodworking Projects and Plans for Beginners Wood Projects For Adults

If you are a beginner and very enthusiastic about doing a DIY project for house afterward, woodworking can be interesting. If you do not have the right information, instruction, and skill, you might land up spending more time and money than you initially meant to spend. As a novice woodworker, you need to have time and the appropriate tools. Having said, there are a couple of essential aspects you need to remember, before starting with any woodworking project.

1. If you are a beginner, you must first need to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Do not begin a project if you’re not interested, as this may land you in a terrible location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this thing you’re making.

3. Consider your skills and examine the time that you have, before you start with a job.

4. Start jobs which you’re able to finish. If you are in the middle of some work, then it is wise to not start any project in any way.

Starting Your First Woodworking Shop Wood Projects For Adults

If you maintain those vital points in mind before you begin a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it requires effort. So how do you get started?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it is very important to choose the woodworking jobs you wish to begin with. As a newcomer, always select a job which has quite a basic build up or a simple structure. Some easy to start projects comprise, bird feeder, benches, shelves, etc.. As soon as you get hold of these techniques, you can always proceed to the next level of woodworking projects, such as cabinets, sheds, and others. Beginning projects should keyword be complicated and less bothersome so you have a better knowledge of working with woods and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Projects For Adults

Tools would be the means whereby you can win the struggle of woodworking. Many people believe power tools are requires. However, for novices, basic hand tools can be very convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would require would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to operate. As a key tool, workbench should be part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much simple for you. When you purchase a hammer, constantly assess the balance between the weight and endure. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at several sizes. There are various sorts of saws out there in the market. Decide on a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly you will find Canadian types and standard flat kind. Possessing all of them can help you ahead of time woodworking. You might also buy keyword power screwdrivers as they make the work much quicker.

5. Measuring tape – It is another very important tool which you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. However, this is not a tool for beginners, but having it might make work easier for you in a subsequent stage.

7. Drill – Drill helps you create holes in timber. Power drills are more helpful but they cost more. Low wattage power drills will make the task much easy.

8. Additional small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There’s no fixed cost on woodworking projects. Based on the type of job that you would like to finish, pricing could be set. The simple the job, the less price it involves. But at the very beginning buying the tools will probably be somewhat hefty. Because of this, it is much better to resolve a budget on the resources, then keyword on the project. Buying the fundamental tools will make certain you don’t need to buy any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things that each and every newcomer should follow. Instructions guide is very easy to comprehend the process, what to do and how to do it. It keyword is a systematic guide for completing the project. Time also plays a significant role in the building of woodworking projects. Woodworking projects require time and so it is necessary for a novice to have ample amount of time every week.

Ideas for Beginners

There aren’t any quick tips or tricks that would make the work easy. Nevertheless, the most essential thing keyword which will allow you to reach success is proper preparation. With proper planning and a strategy, it is possible to achieve success quickly. If you know the objective of woodworking, then the thing that you want to build, the tools you require in order to own and the typical time you can give daily; then you are all set to go.

Conclusion, Wood Projects For Adults

These strategies and instruction will create the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all of the essential tools, materials, area prepared. Read the instructions for building a product handy. Proper strategy and planning can help you to make a fantastic woodworking project for your property.

|

Starting Your First Woodworking Shop Wood Projects For Adults

Folks if you’re trying to find a way to pass time or desire an alternate method to make money they generally turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be very careful when choosing which job to begin with because you will find projects which may be too difficult for a beginner. But do not be concerned about that because we will provide you tips on the ideal way to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, therefore before you pick your job you need to be aware of if you have the available resources to work on that project. Try not to invest a lot of cash on purchasing gear when starting out, purchase more equipment as you gain more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the hand and the normal hands.

How to Become a Master Woodworker From Your Own Home Wood Projects For Adults

Woodworking at home will provide you time to research unique jobs and find out so many things. That’s why it’s important to invest less money when starting out so that you can manage to make errors and at some time learning about various jobs.
It is very important you know about different kinds of wood available for creating projects. Expect carpenters utilize several kinds of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you’ll need for specific jobs you may want to pursue.
Once you understand the basics of wood selection and the use of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good projects to satisfy your needs.

Wood Projects For Adults practice makes perfect so be sure that you practice your work daily if at all possible. Try out a lot of layouts using various tools so that you can get the hang of working with the tools. When starting out you may make a number of errors but with time you will learn how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Wood Projects For Adults

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may get started on a shoestring with a minimum amount of tools and equipment. A small home workshop may produce a broad variety of simple projects that can help you develop your creative and building abilities while rewarding you with artistic and practical wood products which you are able to appreciate and also give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you will do your woodworking, Depending on the dimensions of your house, you may have the ability to produce a dedicated space to your woodworking tasks. This may be a reserved place on your garage or on your basement. In some cases, a detached shed or outbuilding might be perfect to prepare your very first store. A heated store detached from your house provides one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the top levels of the home. Another advantage of detached workshops is, clearly, the noise level. You can work without bothering the rest of the household. A fantastic compromise could be the garage of your property.

This might help decrease the difficulties of dust and sound, however depending on where you live, a keyword garage layout may not be practical during extremes of cold or hot weather.

How to Become a Master Woodworker From Your Own Home Wood Projects For Adults

YOUR WOODWORKING SETUP

Space is obviously a challenge for the woodworker. Regardless of where you are in your evolution, everyone from beginner to expert all wishes they add more space to work in. Wood Projects For Adults if you’re able to have a dedicated spot for a marathon all the greater. Floor tools and bench top equipment can stay in place from project to project. If this installation isn’t hopeless, at least try to create a bench area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the beginning, set up a seat area where you are able to store and use the majority of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A basic workbench can be constructed from cheap laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat should be about waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the seat to home your hand power tools along with a pegboard above the bench to hang other gear. Put in a woodworking vice at one end of your seat on the front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Projects For Adults

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, then purchase your quality tools in your regional building and hardware center. If your budget is tight buy quality used tools from others through Kijiji or other local ads. You will find plenty of quality lightly used programs out there which belong to people who stumbled on that one molding project around the home or obtained tools as gifts which they won’t ever utilize. You can usually buy tools for all these sellers for less than half of the initial cost and save even more money if you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will require additional time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple extra bucks on a inexpensive piece of gear. The excess cost of time and travel in these scenarios is generally justified when purchasing large ticket items like table saws, bandsaws or large ended tools like surface planers in the future.
For smaller acquisitions, a visit to your building center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum quantity of hand equipment yet produced sophisticated and intricate pieces. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection for your eyes. Purchase a quality oil collection that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually impair your vision and influence safety. Avoid wearing gloves at a workshop. Most impair vision and dust up quickly. You can avoid wearing them all together in the event that you find them uneasy.

The next bit of critical safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking may be noisy and long-term exposure to those sound levels may affect hearing and result in tinnitus and other hearing losses. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Frequently referred to as a skill saw after the popular brand name, this may end up being the most versatile tool in a startup workshop. In fact, in the hands of an expert, a power hand saw can be employed to build an entire property. As mentioned before get a quality manufacturer saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you even start your second project. After choosing the proper saw install an excellent blade. Most saws include a starter blade of lower quality even if they’re a good saw. Keep this blade for a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool can’t only cut curves. It’s perfect for cutting holes in wood too like handle slots. Eventually, you’re going to want to obtain a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw can be a fantastic stop gap for the novice woodworker.

Buy an range of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget contemplate a 1/2 inch chuck over the conventional 3/8 inch version. Through tough lessons learned, I have discovered that buying quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life tends to be bad and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not need on your workshop. Purchase an range of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Create a habit of returning each drill piece to its potential slot at the holder after each use. Last, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible instrument in the shop, and frequently the most misunderstood one. |} By the way, the hammer is the one tool where most workshop injuries happen. Although the most frequent, hammer accidents are usually of a minor character, varying from bruised fingers to the temporary reduction of a fingernail. Hammers significantly vary in price and quality. So what is the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The mind typically comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using big framing hammers at the workshop and any with dimpled head tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable in the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This tiny power tool can manage just about any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you will likely upgrade to a floor version disk and belt sander. But for now, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander with just a little bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets with an extra supply of 100 grit paper. You’ll get this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Although low tech in theory, these tools allow you to taper borders, flatten high spots and fix any imperfections in timber bits. {Start with a typical amount 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, good clamps are expensive and it normally requires the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the maximum clamps that you can afford. You may get in touch with them for smaller glue jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for sanding, filing, and hole cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and avoid metal working vices with metal jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the better vices offer you rapid release mechanisms that enabled the consumer to rapidly open and close the limbs with no tedious handle rotation. The timber clamping surfaces on your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices which will not crush or damage lots of the different woods that I utilize. Whether I’m working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be one of your most frequently used tools. Purchase a good quality name brand tape measure with a broad tape typically in the 25-foot range. Although in your store you might not be using the tape at these lengths, the larger tape steps offer more rigid tapes which won’t flop around and slide off the end of boards. Measuring when you’re by yourself will be a great deal easier, and of course, quality tape steps can endure for several years.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will generate a nice mark without scratching the wood. Harder pens like 2B’s can scratch softwoods and will require extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, set square and rate square. These inexpensive tools will help you in marking the right angles in addition to chemical angles. Get the number two and three Robertson set. I discover that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered bits. Lastly, get a pair of 12-inch wood documents. The expense of glue through all of your jobs is a little cost consideration. For that reason, it makes sense to go with the very best. I also have discovered over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Wood Projects For Adults

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of rushed lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary tools and equipment, anyone can learn the profitable abilities of his time-tested avocation and revel in project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Natalie Wood

Born in San Francisco to Russian immigrant parents, Wood began her career in film as a child and became a successful Hollywood star as a young adult, receiving three Academy Award nominations before she turned 25 years of age. She began acting in films at the age of four and, at age eight, was given a co-starring role in Miracle on 34th Street (1947).[2] As a teenager, she earned a nomination for the Academy Award for Best Supporting Actress for her performance in Rebel Without a Cause (1955). She starred in the musical films West Side Story (1961) and Gypsy (1962), and received nominations for the Academy Award for Best Actress for her performances in Splendor in the Grass (1961) and Love with the Proper Stranger (1963). Her career continued with films such as Sex and the Single Girl (1964), Inside Daisy Clover (1964), and Bob & Carol & Ted & Alice (1969).

During the 1970s, Wood began a hiatus from film and had two children with husband Robert Wagner, whom she married twice. She appeared in only three films throughout the decade, but did act in several television productions; her television work including a remake of the film From Here to Eternity (1979) for which she received a Golden Globe Award. Wood's films represented a "coming of age" for her and Hollywood films in general.[3] Critics and scholars have suggested that Wood's cinematic career, one of the few to include both child roles and roles playing middle-aged characters, represents a portrait of modern American womanhood in transition.[4][5]

Wood drowned on November 29, 1981, at the age of 43. The events surrounding her death have been controversial due to conflicting witness statements,[6] prompting the Los Angeles County Sheriff’s Department in 2012 to list her cause of death as "drowning and other undetermined factors".[7][8] In 2018, Wagner was named a person of interest in the ongoing investigation into Wood's death.[9]

Video: Woodworking Projects