Wood Projects To Make | Woodworking Tips

Adept woodworker Ted McGrath created the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those qualities along with a few petty pitfalls will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, himself is also an instructor and a member of AWI as well. Ted’s woodworking Package contains a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to start woodworking when they are following because all the thoughts and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so he could gather enough material for a comprehensive package, and he ended up making a truly’complete’ woodworking resource.

Many may still seem unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more challenging to make the right choice. There are actually lots of things that place Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will be able to profit out of Ted’s woodworking Package. People who are just getting started will discover the thoughts and projects in Ted’s package quite simple. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really easy to follow Ted’s easy step by step directions. Presently, both beginner and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is that they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source that helps beginners learn a lot about woodworking. They’ll also have the ability to advance their woodworking and carpentry skills via the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking jobs. Woodworkers are going to be able to locate any job of their choice in this bundle quite easily, even though there numerous options.

60-Day Iron Clad Money Back Guarantee

In general, this product is and those who buy it’ll be backed by a 60-day warranty, so when this woodworking package fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a marginally long period to down because of its large size. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

As there are so many ideas, plans and projects at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so comprehensive and vast that it contains pretty much every woodworking project a woodworker might be interested in building.

This woodworking package made by Ted McGrath is truly unmatchable and can’t be compared to those other woodworking bundles that can be found throughout the net. Ted has done his very best to direct them in every possible way he can, through easy to understand textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools , but the idea is to purchase the essential hand and power tools which novices will need. You can always add to your toolbox as you get experience!

Wood Projects To Make Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your new woodworking tools, but how? Your woodworking project plan should provide you step by step directions and techniques to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the authors in woodworking publications do a story on the best way best to improve your woodworking craft. When it’s showing you how you can apply a finish to a finished job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying educational DVD like those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, the way to use a router, the way to turn wood jobs, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Projects To Make

If you are just beginning and very interested in doing a DIY project for house then, woodworking can be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more money and time than you originally intended to spend. As a beginner woodworker, you need to have space, time and the correct tools. Having said, there are a couple of essential aspects that you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your hands is a particular feeling. Don’t start a job if you are not interested, as this may land you in a bad location.

2. Think of the main reason behind creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, before you start with a job.

4. Start jobs that you’re able to complete. If you are in the midst of a work, then it’s better not to start any project in any way.

How to Become a Master Woodworker From Your Own Home Wood Projects To Make

If you maintain those essential points in mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires preparation as much because it requires effort. So how do you begin?

Getting Started Using Woodworking Projects and Plans for Beginners

Before starting anything, it’s essential to opt for the woodworking jobs you wish to begin with. As a beginner, always pick a job which has quite a basic construct up or a simple structure. A few easy to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you find these techniques, you could always move into the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so you have a better knowledge of working with woods and their tools. When the job is selected, start selecting your own tools.

Beginners Woodworking Tools, Wood Projects To Make

Tools are the ways whereby you will win the struggle of woodworking. Many men and women think that power tools are requires. However, for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is your hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. A small and lightweight hammer can make things much easy for you. When you purchase a hammer, always check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available in the marketplace. Decide on a size that you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them can help you ahead of time woodworking. You can even buy keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you demand a wrench. Nonetheless, this isn’t a tool for beginners, but having it might make work simpler for you at a later stage.

7. Drill – Drill makes it possible to create holes in timber. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed price on woodworking jobs. Based on the type of job that you would like to complete, pricing can be determined. The simple the job, the less price it involves. But at the beginning purchasing the tools will probably be a little hefty. Because of this, it’s better to fix a budget first on the tools, then keyword on the undertaking. Buying the basic tools will make certain you do not have to buy any more material aside from the timber ply.

Time and Directions

Directions are one of the principal things which each and every beginner should follow. It is like the woodworking Bible. Instructions guide is very easy to understand the procedure, what to do and the way to do it. Time also plays an important part in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a novice to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword which will help you to reach success is proper planning. With proper planning and a plan, it is likely to achieve success immediately. If you know the objective of woodworking, then the item you want to construct, the resources you need in order to own and the average time you can devote every day; then you are ready to go.

Conclusion, Wood Projects To Make

All these strategies and instruction is likely to make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all the essential tools, materials, area ready. Read the instructions for building a product handy. Appropriate strategy and planning will allow you to make a fantastic woodworking job for your home.

|

Starting Your First Woodworking Shop Wood Projects To Make

Folks when trying to find a way to pass time or want an alternative method to make money they usually turn to a hobby they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be very careful when choosing which job to begin with since there are jobs which may be too difficult for a newbie. But don’t worry about that because we will give you tips on the ideal way to start woodworking as a beginner.

The same as any other hobby woodworking demands some working equipment, therefore before you choose your job you need to know whether you’ve got the available tools to work on such a job. Try not to invest a good deal of cash on purchasing gear when starting out, buy more gear as you get more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the normal hands.

Finding Woodworking Projects and Plans for Beginners Wood Projects To Make

To keep yourself updated you have to disseminate with various brands tools and woods. Woodworking in your home will provide you time to research unique jobs and find out so many things. That is why it’s very important to spend less money when starting out so that you can manage to make mistakes and at any time learning about various projects.
It is very important that you know more about different kinds of wood available for creating jobs. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning which kind of wood that they use can help you prepare the wood you will need for certain jobs you may want to pursue.
As soon as you understand the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in building good jobs to fulfill your wants.

Wood Projects To Make practice makes perfect so make sure you practice your work daily if possible. Try out a lot of layouts using a variety of tools so that you can get the hang of using the tools. When starting out you may make a number of mistakes but with time you will find out how to properly utilize them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Projects To Make

Woodworking as a hobby can be one of the most rewarding experiences you will ever enjoy. You can get started on a shoestring with a minimal amount of gear and equipment. A small home workshop can generate a broad array of simple projects that will help you develop your creative and construction skills while rewarding you with practical and artistic wood products that you can appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should start with, let us discuss where you will perform your woodworking, based on the dimensions of your home, you might have the ability to create a dedicated space to your woodworking activities. This may be a reserved spot in your garage or in your basement. Sometimes, a detached shed or outbuilding might be perfect to prepare your first store. A heated shop detached from your house offers one distinct advantage: better pest management. Without complex dust control methods, basement workshops will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems where cold air returns found in the basement draw up dust into the top levels of the house. Another benefit of detached workshops would be, of course, the noise level. It’s possible to work without disturbing the remainder of the family. A fantastic compromise could be the garage of your property.

This can help decrease the difficulties of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Projects To Make

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Wood Projects To Make if you can have a dedicated spot for a marathon all the better. Floor gear and bench top gear can stay in place from project to project. If this setup is not impossible, at least attempt to create a bench area where equipment can be saved and pulled out as necessary. If at all possible plan for inevitable growth as you acquire more tools and equipment. In the beginning, set up a bench area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools and a pegboard above the seat to hang other gear. Install a woodworking vice at one end of your seat on front to maintain small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Projects To Make

The scope of your start-up equipment will be mostly based on your budget. Whether you have got big financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, buy your quality tools at your local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative local advertisements. There are an abundance of quality lightly used programs out there which belong to people who embarked on that one molding project around the home or received tools as presents that they will never utilize. You can usually buy tools for all these sellers for less than half the initial price and save even more money if you create a package deal for all their unused equipment. Of course, acquiring tools from private individuals will require additional time and possibly travel expenditures. Weigh out the benefits of traveling across town to save a couple extra bucks on a cheap piece of equipment. The excess expense of travel and time in these situations is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet produced sophisticated and intricate bits. Focus on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here is a checklist of the useful tools You Will Need to get started:
Safety Equipment: Start as expected with eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Buy a quality oil set that will be scratch resistant. Progressive scratching of thinner plastic pairs will eventually hamper your vision and influence safety. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You may avoid wearing all of them together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker however is almost as critical as eye protection. Woodworking can be noisy and long-term exposure to those noise levels may affect hearing and lead to tinnitus and other hearing losses. I am keeping the dust from my hair. I am all set!

Power Hand Saw: Often referred to as a skill saw following the popular brand name, this may end up being the most flexible instrument in a startup workshop. In reality, in the hands of a professional, a power hand saw can be used to build an whole property. At some point, you are going to want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even elaborate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. All these tend to cut back and will burn out before you even start your second project. After selecting the proper saw put in a quality blade. Most skill saws come with a starter blade of lesser quality even if they’re a fantastic saw. Keep this blade as a backup and install an excellent blade with carbide teeth. Start with a hybrid blade. These have a balanced tooth count which works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include excellent flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile tool cannot only cut curves. It is ideal for cutting holes in wood too like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Buy an assortment of blades to your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Through tough lessons learned, I have discovered that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and have to be recharged often. Their battery life will be bad and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not want on your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its prospective slot at the holder after each use. Lastly, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, particularly if you picked an 18-volt model.

Hammer: The hammer remains as the most versatile instrument in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 tool where most workshop accidents happen. Even though the most frequent, hammer injuries are often of a minor nature, varying from bruised palms into the temporary reduction of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and head. The good hammer is balanced, does not rust and comes with a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers usually have wood handles with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce scope for overall work and also a smaller finishing hammer for more complex work. Avoid using large framing hammers at the workshop and some other with dimpled mind tips. These types of hammers are more suited to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking abilities evolve, you’ll likely upgrade to a floor version disk and belt sander. However, for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited amounts of surface space. As you embark on the first few projects you might discover that your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or 300 grit paper. Buy an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get this caliber of paper that the most versatile on your store.

Hand Planes and Chisels: These traditional tools are a must in each workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and fix any imperfections in wood bits. {Start with a typical amount 4 plane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold down your wood pieces as you operate on them. Unfortunately, superior clamps are costly and it normally requires the beginner woodworker a few years to accumulate a comprehensive set of wood clamps. Start with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, however, the structure is still the same. Get a pair of the maximum clamps that you could spend. You can get in touch with them for smaller adhesive jobs and expand them to their full length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller jobs for trimming, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the better vices offer rapid release mechanisms that enable the user to rapidly open and close the jaws with no dull handle rotation. The wood clamping surfaces in your vice will periodically need replacement. I would rather use soft walnut in my vices which will not crush or damage many of the different forests that I utilize. Whether I am working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step is going to be among your most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically in the 25-foot selection. Even though in your shop you may not use the tape at these spans, the larger tape measures offer more rigid tapes which won’t flop around and slide off the end of planks. Measuring when you’re on your own will be a lot simpler, and of course, quality tape steps can last for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will generate a wonderful mark without scratching the timber. Avoid oversized carpenter’s pencils. Their big flat leads are simply too coarse for precise measurement in the workshop.

Additional Tool and Materials: Listed below are a few other useful tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools will assist you in marking the right angles in addition to chemical angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works best for many woodworking projects and will be the most compatible with a drill powered pieces. Lastly, get a set of 12-inch wood documents. The expense of adhesive through all your projects is a little cost consideration. Therefore, it makes sense to go with the best. I have also found over time that I get the best results with both indoor and outdoor projects when I use quality outside grade glue. All these resin-based compounds unlike conventional water-based wood adhesive, won’t break down and neglect with moisture.

CONCLUSION, Wood Projects To Make

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most basic tools and equipment, anyone can learn the rewarding abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Wood veneer

In woodworking, veneer refers to thin slices of wood and sometimes bark, usually thinner than 3 mm (1/8 inch),[1] that typically are glued onto core panels (typically, wood, particle board or medium-density fiberboard) to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in Wood Veneer HPL. Veneer is also a type of manufactured board.

Veneer is obtained either by "peeling" the trunk of a tree or by slicing large rectangular blocks of wood known as flitches. The appearance of the grain and figure in wood comes from slicing through the growth rings of a tree and depends upon the angle at which the wood is sliced. There are three main types of veneer-making equipment used commercially:

Each slicing processes gives a very distinctive type of grain, depending upon the tree species. In any of the veneer-slicing methods, when the veneer is sliced, a distortion of the grain occurs. As it hits the wood, the knife blade creates a "loose" side where the cells have been opened up by the blade, and a "tight" side.

Video: Woodworking Tools