Wood Router Projects Free | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities that make it the”#1 woodworking Resource” and some of those attributes alongside a few petty pitfalls will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, himself is also an instructor and a part of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite simple to begin woodworking whenever they are after because most of the ideas and jobs Ted’s resource are simple to comprehend and easy. Ted McGrath spent two years exploring so that he could gather enough material for a comprehensive package, and he ended up creating a truly’complete’ woodworking resource.

Many may still seem unsure if they need to be purchasing Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right option. There are in fact many things that place Ted’s woodworking Package apart from others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. People who are just getting started will find the ideas and jobs in Ted’s package quite easy. No doubt, complicated carpentry is involved; nonetheless, they will find it really simple to follow Ted’s easy step by step directions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they can be completed in an extremely short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very valuable bonuses to the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is two hundred page resource that helps beginners learn a whole lot about woodworking. They will also have the ability to advance their carpentry and woodworking abilities through the 150 videos.

Excellently Organized

It is quite surprising that the material’s in Ted’s woodworking Package are so excellently organized although it comprises around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers are going to be able to find any project of their choice within this package quite readily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and people who purchase it’ll be endorsed by a 60-day warranty, so when this woodworking bundle fails to meet them, they can always get their cash back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long period to down due to its large dimensions. Yet, using a high-speed internet connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is so impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design package is so thorough and vast that it contains just about every woodworking project a woodworker may be considering building.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the net. Ted has done his best to direct them in every possible way he could, through simple to understand textual directions, clear pictures and even videos as well.

Therefore, woodworkers who purchase Ted’s Woodworking Resource will not be disappointed with the woodworking ideas and woodworking jobs they will find inside. So, it’s definitely worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and off with listing more innovative hand tools and much more woodworking power tools , but the idea is to buy the crucial hand and power tools which beginners will need. You may always increase your toolbox as you gain experience!

Wood Router Projects Free Guidance for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, so you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and techniques to finish your project. However, if you are unsure about what to do there is help available! There are several areas that starting woodworkers can learn about the woodworking craft. First, subscribe to a few of those many woodworking magazines available. Each month the writers in woodworking publications do a story about how best to increase your woodworking craft. When it is showing you how to apply a finish to a completed job, or how to create a mortise and tenon joint, something new could be heard every month. Next, is purchasing instructional DVD like the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: mastering your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Router Projects Free

If you are just beginning and very enthusiastic about doing a DIY project for house afterward, woodworking could be fun. If you don’t have the proper information, instruction, and ability, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have space, time and the correct tools. Having mentioned, there are a few essential aspects you need to remember, before beginning with any woodworking project.

1. If you’re just beginning, you must first have to be very interested in woodworking. Creating something new with your hands is a particular sense. Don’t start a project if you are not interested, because this might land you in a terrible place.

2. Consider the primary reason for creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your skills and analyze the time you have, before you begin with a project.

4. Start jobs which you’re able to finish. If you are in the middle of a work, then it’s better to not start any project in any way.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Router Projects Free

If you keep those vital things in mind before beginning a woodworking project, it is going to become very simple for you to achieve success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Plans for Beginners

Before starting anything, it’s very important to opt for the woodworking jobs you want to start with. As a beginner, always select a project which has a very basic construct up or a very simple construction. Some simple to begin projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed to the next level of woodworking jobs, like cupboards, sheds, along with others. Beginning jobs should keyword be less complicated and less bothersome so that you have a better knowledge of working with woods and their tools. When the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Wood Router Projects Free

Tools are the ways through which you will win the struggle of woodworking. A lot of men and women think that power tools are requires. But for novices, basic hand tools can be very handy and more than helpful in completing a job. If woodworking is the hobby, then a few tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and measurements. Even the workbench, when fixed with vises, provide ample space to operate. As a primary tool, workbench must be part of your beginner’s woodworking tools.

2. Hammer – Hammer is a vital tool to get woodworks. It can help you to drive nails, pins, staples, etc.. Even a small and lightweight hammer can make matters much simple for you. When you buy a hammer, constantly check the balance between the weight and endure. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you cannot live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws out there in the marketplace. Decide on a size that you can deal with.

4. Screwdriver – Screwdrivers are available in different shapes and sizes. Mostly there are Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also buy keyword power screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool which you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking projects require fixing bolts and fixes. For such projects, you require a wrench. Nonetheless, this isn’t a tool for novices, but using it might make work easier for you at a later stage.

7. Drill – Drill helps you make holes in wood. Low wattage power drills can make the job much easy.

8. Additional small and basic tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking projects. Based on the sort of project that you would like to complete, pricing could be set. The simple the job, the less cost it involves. But at the very beginning buying the tools will be somewhat hefty. Therefore, it’s better to fix a budget on the resources, then keyword on the undertaking. Buying the fundamental tools will make certain you don’t have to buy any more material other than the wood ply.

Time and Instructions

Instructions are one of the primary things that each and every newcomer should follow. Instructions manual is very easy to understand the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the project. Time also plays a significant part in the building of woodworking jobs. Woodworking projects require time and so it is necessary for a beginner to have ample amount of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or suggestions that would make the work easy. Nevertheless, the most essential thing keyword that will allow you to reach success is proper preparation. With appropriate planning and a plan, it is likely to achieve success immediately. If you understand the objective of woodworking, the item that you need to construct, the tools you require to possess and the typical time you can devote every day; then you are ready to go.

Conclusion, Wood Router Projects Free

These strategies and education will create the woodworking projects and strategies for novices fast to complete. Always ensure you have all of the essential tools, materials, area prepared. Keep the instructions for constructing a product handy. Proper strategy and planning can allow you to make a fantastic woodworking project for your home.

|

The Benefits of Woodworking Wood Router Projects Free

Folks when trying to find a way to pass time or want an alternate method to make money they generally turn to a hobby they enjoy. It’s very exciting to do and everyone can begin.

When doing woodworking at home there are a lot of projects one can consider. When starting out you need to be quite careful when choosing which project to start out with because you will find projects that may be too difficult for a beginner. But don’t be concerned about that because we will give you guidelines on the right means to begin woodworking as a beginner.

Just like any other hobby woodworking demands some working equipment, so before you choose your job you have to know whether you’ve got the available tools to work on that job. Try not to spend a lot of money on purchasing equipment when starting out, purchase more gear as you get more experience and become an expert carpenter. Should you enjoy your hobby then there’ll be no difference between the artistic hand as well as the normal hands.

Starting Your First Woodworking Shop Wood Router Projects Free

Woodworking at home will provide you time to explore different projects and learn a lot of things. That is why it’s important to invest less money when starting out so you can afford to make mistakes and at any time learning about various projects.
It’s extremely important that you know more about the different types of wood available for creating projects. Expect carpenters utilize different types of wood quality for decorating bits, learning what type of wood they use can help you prepare the wood you will need for certain projects you might want to pursue.
As soon as you know the basics of wood choice and the usage of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can help you in building good jobs to fulfill your wants.

Wood Router Projects Free practice makes perfect so make sure you practice your work every day if possible. Try out a lot of designs using various tools so you may find the hang of using the tools. When starting out you can earn a number of errors but with time you will learn how to correctly use them and produce quality projects.

|

Starting Your First Woodworking Shop Wood Router Projects Free

Woodworking as a hobby may be among the most rewarding experiences you’ll ever enjoy. You can get started on a shoestring with a minimum number of gear and equipment. A small home workshop may produce a broad array of simple projects which will allow you to develop your creative and construction skills while rewarding you with artistic and practical wood products that you can enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you will perform your woodworking, Depending on the size of your house, you might be able to create a dedicated space to your woodworking tasks. This may be a reserved spot on your garage or in your cellar. Sometimes, a detached shed or outbuilding may be perfect to set up your very first shop. A heated shop detached from your home offers one distinct advantage: better dust control. Without complex dust control systems, basement workshops will inevitably produce dust that travels into the living area of your house. This is very true in homes with forced air heating systems where cold air yields located in the basement draw dust up into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This might help decrease the problems of dust and noise, however based on where you reside, a keyword garage workshop might not be sensible during extremes of cold or hot weather.

Finding Woodworking Projects and Plans for Beginners Wood Router Projects Free

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to work in. Wood Router Projects Free if you can have a dedicated spot for a marathon all the greater. Floor gear and bench top equipment can stay in position from project to project. If this installation is not impossible, at least attempt to make a chair area where equipment can be stored and pulled out as necessary. If possible plan for inevitable growth as you get more tools and gear. In the start, establish a seat area where you are able to store and use most of your gear, using a temporary expansion of your activities onto the garage or basement floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. That will enable you to work comfortably while standing. Add a sturdy shelf beneath the seat to house your hands power tools and a pegboard over the bench to hang additional equipment. Put in a woodworking vice at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Router Projects Free

The scope of your startup equipment will be largely based on your financial plan. Whether you’ve got big financial resources or you are starting on a shoestring consistently buy quality equipment. If you can afford it, buy your quality tools in your local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find plenty of quality lightly used programs out there which belong to people who embarked on that 1 molding project around the home or obtained tools as presents which they won’t ever use. You can usually buy tools for all these sellers for under half the original cost and save even more money if you make a package deal for all their unused equipment. Of course, acquiring tools from private people will take additional time and perhaps travel expenses. Weigh out the advantages of traveling across town to save a couple added dollars on a cheap piece of equipment. The excess expense of time and travel in these scenarios is generally justified when buying large ticket items such as table saws, bandsaws or high ended tools like surface planers later on.
For smaller acquisitions, a trip to your construction center could possibly be the best approach.

START-UP EQUIPMENT

In earlier times skilled workers worked with a minimal amount of hand gear yet generated sophisticated and complex pieces. Concentrate on developing your abilities with your startup set of tools and prevent lamenting about the gear you wished you’d.
Here’s a checklist of the more useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic collection that will be scratch resistant. Progressive scratching of cheaper plastic pairs will gradually hamper your vision and affect security. Avoid wearing goggles in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next piece of critical safety gear that you’ll need involves ear protection. Ear protection can be overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. With this set up I’m shielding my eyes and my ears. I am keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular brand name, this may prove to be the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an whole property. At some point, you’ll want to buy a table saw, but for now, a power hand saw for the woodworker on a budget empowers him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get an excellent brand saw. Avoid cheap unknown brands. These tend to cut inaccurately and will burn out before you even start your next job. After selecting the proper saw install a quality blade. Most saws come with a starter blade of lower quality even if they’re a fantastic saw. Keep this blade for a backup and put in an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will include great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile tool cannot just cut corners. It is ideal for cutting holes in wood also like handle slots. At some point, you’re going to want to obtain a ring saw. Bandsaws are much more flexible but a excellent floor unit can be expensive. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget consider a 1/2 inch toss within the standard 3/8 inch model. Through tough lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Buy an assortment of superior carbide tipped drill bits which are stored in a holder tagging each drill bit size. Make a habit of returning every drill bit to its prospective slot at the holder after every use. Last, get a pair of tough steel driver bits. Your drill can also be a versatile screwdriver, particularly if you selected an 18-volt version.

Hammer: The hammer stays as the most versatile tool in the shop, and frequently the most misunderstood one. |} Incidentally, the hammer is the 1 instrument where most workshop injuries happen. Although the most ordinary, hammer accidents are often of a minor character, varying from bruised palms into the temporary reduction of a fingernail. Hammers significantly vary in quality and price. So what’s the difference between a inexpensive hammer and a costly hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable grip. Many hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a name brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more complex work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These types of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet palm sander. This little power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you’ll likely update to a floor model disk and belt sander. But for the time being, the ever-versatile palm sander can clean up edges, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll discover your palm sander with just a little bit of effort can change rough looking inventions into virtual works of art! You can use your palm sander to sand and form rough boards using 100 grit paper and after finish your job with 200 or 300 grit paper. Buy an range of sandpaper sheets using an excess source of 100 grit paper. You’ll find this grade of paper that the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper borders, sew high stains and fix any imperfections in wood pieces. {Start with a standard amount 4 airplane and an assortment of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it normally requires the novice woodworker a couple of years to accumulate a detailed set of timber clamps. Start with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, however, the structure remains the same. Receive a pair of the longest clamps that you can spend. You can get in touch with them for smaller adhesive jobs and expand them to their entire length for bigger jobs.

Shop Vice: A shop vice installed at the end of the bench is perfect for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood pieces without marring or damaging them. Many of the greater vices offer rapid release mechanisms that enable the consumer to rapidly open and close the jaws without tedious handle rotation. The wood beamed surfaces in your vice will occasionally require replacement. I would rather utilize soft walnut in my vices which will not crush or damage lots of the different forests that I work with. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most often used tools. Buy a fantastic excellent name brand tape measure with a broad tape typically from the 25-foot selection. Although in your shop you may not be using the tape in these spans, the larger tape steps provide more rigid tapes that won’t flop around and slip off the end of boards. Assessing when you’re by yourself will be a lot easier, and of course, quality tape measures can endure for several decades.

When marking projects, I favor a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Avoid oversize carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and speed square. These inexpensive tools can help you in marking the right angles as well as compound angles. Get the number two and three Robertson set. I find the Robertson format works great for many woodworking projects and is the most compatible with a drill powered pieces. Last, get a pair of 12-inch wood files. The expense of adhesive through all your jobs is a minor cost consideration. For that reason, it makes sense to go with the best. I have also found over time that I receive the best results with both indoor and outdoor jobs once I use quality outdoor grade adhesive. These resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Wood Router Projects Free

The peaceful satisfaction of woodworking is a wonderful experience in this day and age of hurried lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested hobby and enjoy job after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

List of first ascents (sport climbing)

In free climbing, a first ascent (FA), or first free ascent (FFA) is the first successful, documented climb of a route or boulder performed without using equipment such as anchors, quickdraws or ropes for aiding progression or resting. In this article, notable first free ascents of hard routes and boulders are listed, which are regarded worldwide as milestones in the history of free climbing.

Ratings on the hardest climbs tend to be speculative, until other climbers have had a chance to complete the routes and a consensus can be reached on the precise grade. This becomes increasingly difficult as the grade increases, because fewer climbers are capable of repeating the route and passing judgment on its grade.

There are few climbers who have free-soloed in the 5.14 grade range. This list does not include "highball" boulder ascents because the climbers here did not use any padding or spotters. There is some debate on the blurred line between "highball" bouldering and short free solo climbs.[50]

Video: Woodworking Tools