Wood Store Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers using some very remarkable thoughts and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and a few of those qualities alongside a few petty drawbacks will be evaluated in this review.

woodworking workshop

What Type of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an instructor and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really easy to begin woodworking whenever they’re after because all the thoughts and jobs Ted’s source are simple to understand and easy. Ted McGrath spent two years researching so that he could collect enough material for a comprehensive package, and he ended up making a really’complete’ woodworking resource.

Many may still appear unsure if they need to be buying Ted’s woodworking Package, despite all of the positive traits. The plethora of resources available online make it even more challenging to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and projects in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; nonetheless, they will discover that it’s really simple to follow Ted’s simple step by step instructions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The great thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page source that helps beginners learn a lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking thoughts and woodworking jobs. Woodworkers will have the ability to find any job of their choice within this bundle quite readily, even though there so many choices.

60-Day Iron Clad Money Back Guarantee

Overall, this item is and those who buy it’ll be endorsed by a 60-day guarantee, so when this woodworking package fails to meet them, they can always get their cash back.

The Cons

Requires Time to Download

Ted’s woodworking Package may take a marginally long time to down because of its large size. Nonetheless, with a high-speed internet connection it should download in a few minutes.

Slightly Overwhelming

Since there are so many ideas, projects and plans in Ted’s woodworking Resource, so some found it somewhat overpowering and overwhelming. Nonetheless, they did not mind being overwhelmed considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The most important thing is that Ted’s woodworking package is so thorough and vast it contains pretty much every woodworking project a woodworker might be interested in constructing.

This woodworking package made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found throughout the internet. Ted has done his best to guide them in every possible way he can, through simple to comprehend textual directions, clear images and even movies too.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it is certainly worth buying!

The Benefits of Woodworking Wood Store Plans

Woodworking is one hobby that could also be a rewarding career if you like to work together with your hands and construct exquisite pieces of furniture from timber. When you learn that the woodworking crafts and become a fine woodworking craftsman, you’ll have the ability to construct all types of furniture, (beds, table, and chairs), effortlessly. After that you can sell your finished woodworking jobs and make a handsome profit. Wood Store Plans.

It takes time to become proficient at the craft of woodworking. The nice thing about working up to this expert craftsman level is you’ll have the ability to build some really wonderful furniture for you and your loved ones to enjoy. Imagine building a custom coffee table or grandfather clock and having it sit in your living space. It will be a subject of conversation whenever you have friends come over to see. They’ll ask: How can you create it? Just how long can it take to finish the project? What type of wood did you use? What kind of tools did you use? How on earth did you create such a beautiful item of furniture? As you discuss your job, a feeling of pride will encounter you and also do not be surprised if your friends ask you to create one for them too!

Woodwork Crafts – The Beginners Guide To Woodworking Wood Store Plans

If you’re thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to begin in Woodworking? Wood Store Plans.

Begin with an idea in mind of what you would like to construct and then get a excellent woodworking project plan that is geared toward beginners. There are numerous small woodworking projects for beginners available for purchase from online woodworking retailers. A few woodworking plan suggestions for you believing really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to mention a couple. Of course, you can start out with as grand a woodworking program as you choose. On the other hand, the odds are if you start out using a little woodworking job at first, you’ll get a better prospect of keyword finishing the job.

Your woodworking project plan should incorporate some lists! Lists of: woodworking equipment, the amount and variety of wood needed, and the essential hand tools and power tools to complete the undertaking. Note: A word of caution about purchasing woodworking tools. Only buy what you need to complete your instant or upcoming endeavor. This is important especially if you’re a beginner and just starting out. Tools aren’t affordable. The beginner needs good woodworking tools, but it is simple to break the bank purchasing a great deal of tools you might not use all that often. When you do buy tools, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

This is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood chisel set, a hand saw, a miter box using a saw (for cutting edge angles), a coping saw, complete punches, horizontal and straight tilt screwdrivers, a rubber mallet (for tapping pieces together while not damaging the wood), woodworking clamps, a wood vise, a bench airplane, a rasp, a tape measure, a 12″ steel rule, a 6″ steel square, and also do not overlook that the wood glue and a brush to spread the wood adhesive! Of course, you will need a dry area to work and might require a set of saw horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out bigger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We could go on and on with list more innovative hand tools and much more woodworking power tools , but the concept is to purchase the essential hand and power tools which novices will need. You can always add to your arsenal as you get experience!

Wood Store Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, so you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must supply you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are lots of places that beginning woodworkers can learn about the woodworking craft. First, subscribe to one of those several woodworking magazines available. Every month the writers in woodworking publications do a story about the best way to increase your woodworking craft. Whether it is showing you how you can apply a finish to a completed project, or how to create a mortise and tenon joint, something new can be learned every month. Next, is purchasing educational DVD such as those made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, the way to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Starting Your First Woodworking Shop Wood Store Plans

If you’re just beginning and very interested in doing a DIY project for home afterward, woodworking can be interesting. If you do not have the proper information, instruction, and skill, you might wind up spending more money and time than you originally meant to spend. As a novice woodworker, you need to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects you should remember, before beginning with any woodworking project.

1. If you’re a beginner, you must first have to be very interested in woodworking. Creating something new with your own hands is a particular feeling. Don’t begin a project if you’re not interested, as this may land you at a bad place.

2. Think of the primary reason for creating this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and examine the time that you have, before you start with a project.

4. Start projects that you can complete. If you’re in the middle of some work, then it is better to not start any project in any way.

How to Become a Master Woodworker From Your Own Home Wood Store Plans

If you maintain these essential points in mind before you begin a woodworking project, it will become very simple for you to reach success. Woodwork requires preparation as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it’s very important to choose the woodworking jobs that you wish to begin with. As a newcomer, always select a project which has quite a basic construct up or a very simple structure. A few simple to begin projects include, bird feeder, benches, shelves, etc.. As soon as you find the techniques, you can always move into the next level of woodworking projects, such as cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less frustrating so you have a better knowledge of working with woods and their resources. When the project is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Store Plans

Tools are the means whereby you can win the battle of woodworking. A lot of men and women believe power tools are requires. However, for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is also an essential tool to get woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make things much easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut forests at different sizes. There are various sorts of saws available in the market. Choose a size that you can handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat kind. Possessing all of them can help you in advance woodworking. You might even purchase keyword power screwdrivers since they make the work much faster.

5. Measuring tape – It’s another very important tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For these projects, you demand a wrench. However, this isn’t a tool for beginners, but using it might make work simpler for you at a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pencils, gum, basic gum, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking projects. Dependent on the type of job that you would like to complete, pricing can be set. The simple the job, the less price it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it’s better to resolve a budget on the resources, then keyword on the project. Purchasing the fundamental tools will ensure that you don’t need to buy any more material other than the wood ply.

Time and Instructions

Directions are one of the principal things which every beginner should follow. Instructions manual is quite simple to understand the process, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also has an important part in the construction of woodworking jobs. Woodworking projects demand time and therefore it is necessary for a novice to have ample quantity of time weekly.

Ideas for Beginners

There aren’t any quick tips or suggestions that would make the work easy. But the most indispensable thing keyword which can allow you to achieve success is proper planning. With appropriate planning and a plan, it is likely to achieve success quickly. If you know the objective of woodworking, then the thing you want to build, the tools you require to own and the typical time you can devote every day; then you’re all set to go.

Conclusion, Wood Store Plans

These strategies and instruction is likely to create the woodworking projects and plans for beginners quickly to finish. Always make sure that you have all of the essential tools, materials, area ready. Keep the instructions for building a product handy. Appropriate strategy and planning will allow you to make a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Wood Store Plans

Folks if you’re trying to find a way to pass time or desire an alternate method to make money they usually turn into a hobby they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking at home there are lots of jobs one can consider. When starting out you have to be quite cautious when choosing which project to start out with since there are jobs which can be too tough for a newbie. But don’t be concerned about that because we will provide you guidelines on the right means to start woodworking as a newcomer.

The same as any other hobby woodworking demands some working gear, so before you choose your project you need to know if you’ve got the available resources to work on that project. Try not to invest a lot of cash on purchasing equipment when starting out, purchase more equipment as you gain more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the artistic hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Store Plans

Woodworking in your home will provide you time to research different projects and find out a lot of things. That’s why it’s important to spend less money when starting out so that you can manage to make mistakes and at any time learning about different projects.
It’s extremely important you know more about different kinds of wood available for making projects. Expect carpenters utilize several types of wood quality for decorating bits, learning what kind of wood that they use will allow you to prepare the wood you’ll need for certain projects you may want to pursue.
Once you know the fundamentals of wood selection and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do can assist you in creating good jobs to satisfy your needs.

Wood Store Plans practice makes perfect so be sure you practice your work daily if at all possible. Try out a lot of layouts utilizing a variety of tools so that you can find the hang of using the tools. When starting out you can make a number of mistakes but with time you will find out how to properly utilize them and create quality projects.

|

Starting Your First Woodworking Shop Wood Store Plans

Woodworking as a hobby can be one of the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal number of gear and equipment. A small home workshop can generate a broad variety of simple projects which will help you develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you should begin with, let us talk about where you will perform your woodworking, Depending on the dimensions of your home, you might be able to produce a dedicated space to your woodworking activities. This may be a reserved place in your garage or in your cellar. Sometimes, a detached shed or outbuilding might be ideal to set up your very first store. A heated shop detached from your home offers one distinct advantage: better pest management. Without complex dust control systems, basement workshops will inevitably create dust that travels to the living area of your house. This is very true in homes with forced air heating systems in which cold air yields located in the basement draw dust up into the top levels of the house. Another advantage of detached workshops is, of course, the sound level. You can work without bothering the rest of the household. A fantastic compromise might be the garage of your property.

This can help minimize the difficulties of dust and sound, however based on where you live, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

The Benefits of Woodworking Wood Store Plans

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Irrespective of where you are in your development, everybody from beginner to expert all wishes that they add more space to function in. Wood Store Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top gear can stay in position from project to project. If this installation is not hopeless, at least try to make a chair area where equipment could be saved and pulled out as needed. If possible plan for inevitable expansion as you acquire more tools and gear. In the start, establish a bench area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be about waist height. Insert a sturdy shelf below the seat to house your hands power tools along with a pegboard over the seat to hang other equipment. Install a woodworking at one end of the seat on front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Store Plans

The scope of your startup equipment will be mostly based on your budget. Whether you have got large financial resources or you’re starting on a shoestring always buy quality equipment. If you can afford it, buy your quality tools in the local construction and hardware center. If your budget is tight purchase quality used tools from the others through Kijiji or other local ads. There are plenty of quality gently used tools out there which belong to individuals who stumbled on that one molding job around the home or obtained tools as presents that they will never use. You can usually purchase tools for all these sellers for less than half of the original price and save even more money if you create a bundle deal for all their unused equipment. Of course, acquiring tools from private individuals will take additional time and perhaps travel expenses. Weigh the benefits of traveling across town to save a few extra dollars on a cheap piece of equipment. The extra expense of time and travel in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient employees worked using a minimal amount of hand gear yet produced sophisticated and complex bits. Concentrate on developing your skills with your startup set of tools and avoid lamenting about the gear you wished you had.
Here is a listing of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Purchase a quality oil collection that will be scratch resistant. Progressive scratching of thinner vinyl pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up quickly. You can avoid wearing all of them together in the event that you find them uncomfortable.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be long-term and noisy exposure to these noise levels may affect hearing and result in tinnitus and other hearing losses. I also find that wearing hearing protection combats exhaustion.

Most employees tire quicker when subjected to elevated sound levels. Select powerful hearing protection that you find comfortable and effective. These may contain earplugs or full ear keyword muff protectors. I find that a quality set of ear muff guards is perfect for hearing protection.

Lastly, wear a cap to keep the dust out of your hair. I prefer a simple ball cap with my ear muffs and eye protection. I am keeping the dust from my hair. I’m all set!

Power Hand Saw: Often referred to as a skill saw after the favorite name, this may end up being the most versatile tool in a startup workshop. In reality, at the hands of an expert, a power hand saw could be used to construct an whole property. As mentioned before get a quality manufacturer saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After choosing the right saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they’re a good saw. Keep this blade as a copy and put in a quality blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will include great flexibility to your woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument cannot just cut corners. It is ideal for cutting holes in timber also like manage slots. Eventually, you’ll want to obtain a band saw. Bandsaws are much more flexible but a quality floor unit could be expensive. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an range of blades for your own jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the standard 3/8 inch version. Through hard lessons learned, I have discovered that buying quality, in this scenario, is more critical than ever. Cheaper drills tend to get very short run times and need to be recharged frequently. Their battery life tends to be poor and to make things worse keyless chucks come loose and slip frequently. This is one annoyance you do not need in your workshop. Purchase an assortment of superior carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning each drill bit to its potential slot in the holder after every use. Last, get a pair of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you selected an 18-volt model.

Hammer: The hammer remains as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Even though the most ordinary, hammer injuries are often of a minor character, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are precisely machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, doesn’t rust and comes with a comfortable grip. Many hammers in the high-quality range provide metal or fiberglass handles. Cheaper hammers usually have wood grips with poor joints between the handle and head. The head typically comes loose and the tool becomes useless. Pick a name brand quality hammer in the 16-ounce range for general work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This little power tool can manage pretty much any trimming requirements that you have as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disk and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on your first few projects you’ll discover your palm sander using a bit of effort can change rough looking creations into virtual functions of art! You can use your palm sander to sand and form rough planks with 100 grit paper and later finish your work with 200 or 300 grit paper. Buy an assortment of sandpaper sheets using an excess source of 100 grit paper. You’ll find that this caliber of paper the most versatile on your shop.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in concept, these tools enable you to taper edges, sew high stains and correct any imperfections in timber pieces. {Start with a typical amount 4 airplane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll want pliers for glue-ups and just to hold down your wood pieces as you work on them. Unfortunately, superior clamps are expensive and it normally takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Now the pipe has been replaced with long steel shafts, but the structure is still the same. Receive a set of the maximum clamps that you can afford. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger projects.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for sanding, filing, and gap cutting with your jigsaw. Purchase a woodworking vice with stainless steel clamping surfaces and avoid metal functioning vices with steel jaws. Woodworking vices with their timber clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer you quick release mechanisms that enable the user to rapidly open and close the jaws with no dull handle turning. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to use soft walnut in my vices that won’t crush or damage many of the various woods that I work with. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape step will be one of the most frequently used tools. Buy a fantastic excellent name brand tape measure with a wide tape usually from the 25-foot range. Even though in your shop you might not be using the tape in these spans, the bigger tape steps offer more rigid tapes which won’t flop around and slide off the ending of boards. Assessing when you’re by yourself will be a great deal simpler, and naturally, quality tape steps can last for many decades.

When marking jobs, I favor a sharp good old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the wood. Avoid oversized carpenter’s pencils. Their large flat leads are just too rough for precise measurement in the workshop.

Other Tool and Materials: Listed below are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles as well as compound angles. Get the number three and two Robertson set. I discover the Robertson format works great for most woodworking projects and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of adhesive through all of your projects is a minor cost consideration. Therefore, it is sensible to decide on the very best. I have also found over the years that I receive the best results with both indoor and outdoor jobs when I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood adhesive, won’t break down and fail with moisture.

CONCLUSION, Wood Store Plans

The peaceful satisfaction of woodworking is an excellent adventure in this day and age of hurried lives, smart phones, and time-starved careers. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the rewarding abilities of his time-tested avocation and enjoy project after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

Wawa (company)

Wawa, Inc. (/wɑːwɑː/ WAH-WAH) is an American chain of convenience stores and gas stations located along the East Coast of the United States, operating in Pennsylvania, New Jersey, Delaware, Maryland, Virginia, Washington, D.C., and Florida.[5] The company's corporate headquarters is located in the Wawa area of Chester Heights, Pennsylvania in Greater Philadelphia. As of 2008[update], Wawa was the largest convenience store chain in Greater Philadelphia, and it is also the third-largest retailer of food in Greater Philadelphia, after ACME Markets and ShopRite.[6][7]

The Wawa business began in 1803 as an iron foundry.[5] In 1890, George Wood, an entrepreneur from New Jersey,[8] moved to Delaware County, Pennsylvania; it was here that he began the Wawa Dairy Farm.[8] Wood imported cows from the British Crown dependency island of Guernsey, and bought 1,000 acres (400 ha) of land in the Chester Heights area;[8] the corporate headquarters would later be renamed Wawa. Since pasteurization was not yet available, many children faced sickness from consuming raw milk. Wood arranged for doctors to certify his milk was sanitary and safe for consumption, which convinced many consumers to buy the product.[8] The strategy worked, and allowed the Wawa dairy to grow. Demand for dairy products grew rapidly during the 1920s, and so did the company. Wawa began using the slogan "Buy Health by the Bottle"; they served customers in Pennsylvania and New Jersey, delivering milk to customers' homes.

In the 1960s, however, many consumers began buying milk in stores instead of using home delivery. Wawa started to open its own stores to adjust to these market changes.[5][8] On April 16, 1964, Grahame Wood, George Wood's grandson, opened the first Wawa Food Market at 1212 MacDade Boulevard in Folsom, Pennsylvania,[9] which remained in operation until June 17, 2016, when it closed in favor of a new "Super Wawa" down the street. A parade was held from the original location to the new store on opening day.[7][10][11]

Video: Woodworking Tools