Wood Table Building Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource that would present woodworkers with some very remarkable ideas and projects.

The bundle has various qualities which make it the”#1 woodworking Resource” and some of those attributes along with a few petty drawbacks will be assessed in this review.

woodworking workshop

What Type of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who made this innovative package, she’s also an educator and a part of AWI as well. Ted’s woodworking Bundle Includes a diverse selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking whenever they’re following because most of the thoughts and projects Ted’s resource are simple to understand and easy. Ted McGrath spent two years researching so he could collect enough material for an extensive package, and he ended up making a really’complete’ woodworking source.

Many might still seem unsure if they need to be buying Ted’s woodworking Package, regardless of all of the positive traits. The plethora of resources available online make it even more challenging to make the right choice. There are in fact lots of things that set Ted’s woodworking Bundle besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and projects in Ted’s package quite easy. No doubt, complicated carpentry is demanded; nonetheless, they will discover that it’s really simple to follow Ted’s easy step by step instructions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s resource is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also has three very useful bonuses into the woodworkers who buy his bundle, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page resource that will help beginners learn a lot about woodworking. They’ll also be able to advance their woodworking and carpentry skills through the 150 videos.

Excellently Organized

It’s quite surprising that the content’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking thoughts and woodworking projects. Woodworkers will have the ability to find any job of their choice in this package quite readily, though there numerous choices.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it’ll be endorsed by a 60-day guarantee, so if this woodworking bundle fails to meet them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long period to down due to its large size. Yet, with a high-speed online connection it should download in a few minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overrun considering how this package is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is really unmatchable and can’t be compared to all those other woodworking packages that can be found throughout the net. Ted has done his best to direct them in every possible way he could, through easy to comprehend textual instructions, clear images and even movies too.

Thus, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more innovative hand tools and more woodworking power tools here, but the concept is to purchase the essential hand and power tools which beginners will need. You may always add to your toolbox as you get experience!

Wood Table Building Plans Advice for Beginner Woodworking Craftsmen:

At this point you have a fantastic new hobby in woodworking, you’ve bought your woodworking project plan and you are really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you’re not certain about what to do there is help available! There are several places that starting woodworkers can learn about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Each month the authors in woodworking magazines do a story on how best to increase your woodworking craft. When it is showing you how you can apply a finish to a completed project, or how to make a mortise and tenon joint, something new could be learned each month. Next, is purchasing instructional DVD like the ones created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are many educational resources available for the beginning woodworker to find out about the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Table Building Plans

If you’re a beginner and very interested in doing a DIY job for house afterward, woodworking can be interesting. If you don’t have the proper information, education, and skill, you might land up spending more time and money than you originally intended to spend. As a beginner woodworker, you need to have time and the correct tools. Having mentioned, there are a couple of essential aspects that you should keep in mind, before starting with any woodworking project.

1. If you are just beginning, you should first have to be somewhat interested in woodworking. Making something new with your hands is a special sense. Do not start a project if you are not interested, because this might land you at a bad place.

2. Think of the main reason behind making this woodworking project. Decide on the uses of this thing you are making.

3. Consider your abilities and analyze the time you have, until you start with a job.

4. Start jobs that you’re able to complete. If you’re in the midst of some work, then it’s better not to start any project at all.

How to Become a Master Woodworker From Your Own Home Wood Table Building Plans

If you maintain those essential points in your mind before you begin a woodworking project, it will become very simple for you to achieve success. Woodwork requires planning as much because it takes effort. So how can you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it’s essential to choose the woodworking jobs that you want to begin with. As a newcomer, always select a job that has quite a basic construct up or a very simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you get hold of the techniques, you can always proceed to the next level of woodworking jobs, like cabinets, sheds, along with others. Beginning projects should always keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their resources. Once the project is selected, begin selecting your own tools.

Beginners Woodworking Tools, Wood Table Building Plans

Tools are the ways through which you can win the struggle of woodworking. A lot of people believe power tools are needs. But for novices, basic hand tools can be very handy and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for exact cuts and measurements. Even the workbench, when mended with vises, provide ample space to operate. As a primary tool, workbench must be a part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool to get woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you purchase a hammer, always check the equilibrium between the weight and stand. Always select a sturdy, yet lightweight item.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool can help you to cut forests at several sizes. There are various sorts of saws out there on the marketplace. Decide on a size that you can handle.

4. Screwdriver – Screwdrivers can be found in various shapes and sizes. Mostly you will find Canadian types and standard flat type. Possessing all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers since they make the work much quicker.

5. Measuring tape – It is another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing repairs and bolts. For such projects, you require a wrench. Nonetheless, this is not a tool for novices, but using it might make work simpler for you at a subsequent stage.

7. Drill – Drill helps you make holes in timber. Low wattage power drills will make the task much simple.

8. Additional small and fundamental tools – These include pens, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There is not any fixed cost on woodworking jobs. Based on the sort of project that you would like to finish, pricing could be set. The simple the project, the less cost it involves. However, at the beginning purchasing the tools will be a little hefty. Therefore, it is much better to fix a budget on the tools, then keyword on the project. Buying the fundamental tools will ensure that you do not have to buy any more material other than the wood ply.

Time and Instructions

Instructions are among the primary things that each and every beginner should follow. Instructions guide is very simple to understand the process, what to do and the way to do it. It keyword is a systematic guide for completing the project. Time also has a significant role in the building of woodworking projects. Woodworking projects require time and therefore it is necessary for a beginner to have ample quantity of time every week.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most indispensable thing keyword that can help you to achieve success is proper preparation. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the purpose of woodworking, the item that you want to construct, the resources you need in order to possess and the average time it’s possible to give daily; then you are all set to go.

Conclusion, Wood Table Building Plans

All these tips and instruction is likely to make the woodworking projects and strategies for novices fast to finish. Always ensure you have all of the vital tools, materials, space prepared. Read the instructions for building a product handy. Appropriate strategy and planning will help you to earn a fantastic woodworking project for your home.

|

How to Become a Master Woodworker From Your Own Home Wood Table Building Plans

Folks when looking for a way to pass time or desire an alternate way to make money they generally turn into a hobby that they enjoy. Woodworking is one of those hobbies people turn to do as a hobby or home based business. It is very exciting to do and anyone can begin.

When doing woodworking in your home there are lots of projects one can think of. When starting out you need to be very cautious when choosing which job to start out with because you will find projects which can be too tough for a newbie. But do not worry about that since we are going to give you tips on the right means to start woodworking as a beginner.

Just like any other hobby woodworking requires some working gear, therefore before you choose your project you have to be aware of whether you have the available resources to work on that job. Try not to spend a lot of cash on buying equipment when starting out, purchase more gear as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there will be no difference between the hand and the normal hands.

The Benefits of Woodworking Wood Table Building Plans

To keep yourself updated you have to disseminate with various brands tools and forests. Woodworking in your home will provide you time to explore unique projects and find out a lot of things. That’s why it’s important to invest less money when starting out so you can afford to make mistakes and at some time learning about different jobs.
It is extremely important that you know more about the different types of wood available for making projects. Anticipate carpenters utilize several kinds of wood quality for decorating pieces, learning what kind of wood they use can allow you to prepare the wood you will need for specific projects you may choose to pursue.
As soon as you understand the basics of wood choice and the usage of different tools now you can employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to satisfy your needs.

Wood Table Building Plans practice makes perfect so be sure you practice your work daily if possible. Try out lots of designs utilizing a variety of tools so that you may get the hang of using the tools. When starting out you can make a number of errors but with time you will find out how to properly use them and create quality projects.

|

Starting Your First Woodworking Shop Wood Table Building Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can begin on a shoestring with a minimal number of tools and equipment. A little home workshop may generate a wide variety of simple projects that will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products that you are able to appreciate and even give away to family and friends.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let’s discuss where you’ll do your woodworking, Depending on the dimensions of your house, you might have the ability to produce a dedicated space to your woodworking tasks. This might be a reserved place on your garage or in your basement. Sometimes, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house offers one distinct advantage: better dust control. Without complex dust control methods, basement assignments will inevitably create dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air yields found in the cellar draw up dust into the top levels of the home. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the family. A good compromise could be the garage of your property.

This can help decrease the problems of dust and sound, however depending on where you reside, a keyword garage workshop might not be practical during extremes of cold or hot weather.

The Benefits of Woodworking Wood Table Building Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your evolution, everyone from beginner to expert all wishes that they add more space to function in. Wood Table Building Plans if you’re able to have a dedicated place for a marathon all the greater. Floor gear and bench top gear can stay in place from project to project. If this setup isn’t impossible, at least try to make a chair area where equipment can be saved and pulled out as needed. If possible plan for inevitable expansion as you get more tools and equipment. In the start, establish a bench area where you can store and use the majority of your equipment, using a temporary expansion of your actions onto the garage or basement floor.

A rudimentary workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The seat needs to be about waist height. Add a sturdy shelf below the bench to house your hands power tools along with a pegboard over the seat to hang other equipment. Install a woodworking vice at one end of your seat on the front to hold tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Table Building Plans

The reach of your startup equipment will be largely based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring consistently purchase quality gear. If you can afford it, then buy your quality tools in the local construction and hardware centre. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional advertisements. There are an abundance of quality gently used tools out there that belong to individuals who stumbled on that one molding project around the home or obtained tools as gifts which they will never use. You can usually purchase tools for these sellers for under half of the original price and save even more money should you create a bundle deal for all their unused equipment. Of course, getting tools from private people will require extra time and perhaps travel expenses. Weigh out the benefits of traveling around town to save a few added dollars on a cheap piece of gear. The excess expense of travel and time in these situations is usually justified when buying large ticket items like table saws, bandsaws or high ended tools such as surface planers later on.
For smaller acquisitions, a trip to your building center could possibly be the ideal approach.

START-UP EQUIPMENT

In earlier times proficient workers worked with a minimum amount of hand equipment yet produced sophisticated and complex bits. Focus on developing your skills with your start-up set of resources and prevent lamenting about the gear you wished you had.
Here’s a listing of the more useful tools You Will Need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a nice pair of safety glasses which also offer some side protection for your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually impair your vision and influence safety. Avoid wearing gloves in a workshop. Most impair vision and dust up fast. You may avoid wearing all of them together in the event that you find them uneasy.

The next piece of crucial safety equipment that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker however is nearly as critical as eye protection. Woodworking can be long-term and noisy exposure to these noise levels may affect hearing and lead to tinnitus and other hearing losses. I’m keeping the dust out of my hair. I’m all set!

Power Hand Saw: Frequently referred to as a skill saw following the popular name, this may prove to be the most flexible tool in a startup workshop. In fact, in the hands of a professional, a power hand saw could be used to build an whole house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a funding enables him to perform cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent manufacturer saw. Avoid cheap unknown brands. These are inclined to cut back and will burn out before you even start your second job. After selecting the proper saw install an excellent blade. Most saws come with a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a copy and put in an excellent blade with carbide teeth. Begin with a hybrid blade.

Power Jig Saw: A jigsaw will add great flexibility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut corners. It’s ideal for cutting holes in wood also like manage slots. Eventually, you’re going to want to obtain a band saw. Bandsaws are even more flexible but a quality floor unit could be costly. A jigsaw may be a fantastic stop gap for the novice woodworker.

Purchase an assortment of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: buy a quality drill which runs at least 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch chuck over the conventional 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have discovered that purchasing quality, in this case, is more crucial than ever. Cheaper drills have a tendency to have very short run times and have to be recharged frequently. Their long-term battery life will be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Create a habit of returning every drill bit to its potential slot at the holder after each use. Last, get a set of hard steel driver bits. Your drill may also be a flexible screwdriver, especially if you picked an 18-volt version.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents occur. Although the most ordinary, hammer injuries are often of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a fantastic solid joint between the handle and mind. The fantastic hammer is balanced, does not rust and comes with a comfortable handle. Many hammers in the high tech range provide ceramic or metal handles. Cheaper hammers generally have wood handles with inferior joints between the head and handle. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce range for overall work and a smaller finishing hammer for more intricate work. Avoid using large framing hammers in the workshop and any with dimpled head tips. These kinds of hammers are more appropriate for rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This tiny power tool can manage pretty much any sanding requirements you’ve got as a beginner woodworker. As your woodworking abilities evolve, you’ll probably update to a floor model disc and belt sander. But for the time being, the ever-versatile palm sander can clean up borders, cross cuts and perhaps even limited quantities of surface space. As you embark on the first few projects you’ll find your palm sander using just a bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough planks using 100 grit paper and after finish your work with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an extra source of 100 grit paper. You’ll get this grade of paper the most versatile in your store.

Hand Planes and Chisels: These traditional tools are essential in every workshop. |} Although low tech in theory, these tools enable you to taper edges, sew high stains and correct any imperfections in wood bits. {Begin with a standard amount 4 plane and an assortment of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and just to hold off your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually takes the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a set of extended”pipe” clamps. Now the pipe was replaced with extended steel shafts, but the structure remains the same. Receive a pair of the longest clamps that you can afford. You may contact them for smaller glue jobs and enlarge them to their entire length for bigger jobs.

Shop Vice: A shop vice installed in the end of your bench is ideal for holding smaller tasks for trimming, filing, and hole cutting with your jigsaw. Buy a woodworking with replaceable wooden clamping surfaces and avoid metal working vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. A number of the better vices offer rapid release mechanisms that enable the user to quickly open and close the limbs with no tedious handle turning. The timber beamed surfaces on your vice will occasionally require replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage lots of the different woods that I utilize. Whether I’m working in walnut or hard walnut, softwood clamping surfaces work the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step will be among the most often used tools. Purchase a good quality name brand tape measure with a broad tape usually from the 25-foot range. Although in your store you may not be using the tape in these lengths, the bigger tape steps provide more rigid tapes that won’t flop around and slide off the end of planks. Measuring when you’re by yourself will be a lot simpler, and naturally, quality tape steps can last for many years.

When marking projects, I prefer a sharp great old-fashioned HB pencil. An HB pen will generate a wonderful mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will need extra sanding. Avoid oversize carpenter’s pencils. Their big flat leads are just too coarse for precise measurement in the workshop.

Other Tool and Materials: Here are a couple other handy tools to round out your starter workshop: Buy a T-square, set square and rate square. These inexpensive tools can help you in marking the ideal angles in addition to compound angles. Get the number two and three Robertson set. I discover that the Robertson format works great for most woodworking jobs and will be the most compatible with a drill powered pieces. Last, get a set of 12-inch wood documents. The expense of glue through all of your jobs is a little cost consideration. Therefore, it makes sense to go with the very best. I also have discovered over the years that I get the best results with both indoor and outdoor projects when I use quality outdoor grade glue. These resin-based compounds unlike conventional water-based wood adhesive, will not break down and fail with moisture.

CONCLUSION, Wood Table Building Plans

The peaceful gratification of woodworking is a wonderful experience in this era of rushed lives, smart phones, and time-starved careers. With a minimum investment at the most rudimentary tools and equipment, everyone can learn the profitable abilities of his time-tested avocation and revel in job after project!

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

List of tallest buildings and structures in London

The Greater London metropolitan area contains the most skyscrapers in the European Union. As of 2018, there are 30 skyscrapers in London that reach a roof height of at least 150 metres (492 ft),[2] with 18 in the Paris Metropolitan Area, 15 in Frankfurt, eleven in Warsaw and five each in Madrid and Milan.

The history of tall structures in London began with the completion of the 27-metre (89 ft) White Tower, a part of the Tower of London, in 1098.[3][4] The first structure to surpass a height of 100 metres (328 ft) was the Old St Paul's Cathedral. Completed in 1310, it stood at a height of 150 metres (492 ft).[5] St Paul's was the world's tallest structure until 1311, when its height was surpassed by Lincoln Cathedral in Lincoln.[5] It regained the title when the spire of Lincoln Cathedral fell in 1549.[6] Although the spire of the Old St Paul's was destroyed by lightning in 1561, it still stood as the tallest structure in London,[6] while the world's tallest structure became Strasbourg Cathedral in Strasbourg, France.[6] St Paul's was severely damaged by the Great Fire of London in 1666.[5] The title of the tallest structure in London passed to Southwark Cathedral, which stands at a height of 50 metres (164 ft)[7] and no structure in London again rose above 100 metres until 1710, when the current St Paul's Cathedral was completed.[8] At 111 metres (364 ft), the cathedral remained London's tallest building until it was overtaken in 1962 by the BT Tower, which was topped out in 1964 at 177 metres (581 ft) and officially opened in 1965.

Few skyscrapers were built in London before the late 20th century, owing to restrictions on building heights originally imposed by the London Building Act of 1894, which followed the construction of the 14-storey Queen Anne's Mansions.[9] Though restrictions have long since been eased, strict regulations remain to preserve protected views, especially those of St Paul's, the Tower of London and Palace of Westminster, as well as to comply with the requirements of the Civil Aviation Authority.[10][11]

Video: Woodworking Tools