Wood Working Shop Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some very remarkable thoughts and projects.

The package has various qualities which make it the”#1 woodworking Resource” and some of those qualities alongside a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Package contains a varied selection of 16,000 easy ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Strategies
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to start woodworking whenever they are after because most of the thoughts and jobs Ted’s resource are easy to understand and simple. Ted McGrath spent two years researching so he could gather enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking source.

Many might still seem unsure whether they need to be purchasing Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it even more difficult to make the ideal choice. There are in fact lots of things that place Ted’s woodworking Bundle besides other people.

Ted’s woodworking Project �” Pros and Cons

The Experts

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will get to profit from Ted’s woodworking Package. People that are just getting started will find the ideas and projects in Ted’s package quite simple. No doubt, complicated carpentry is involved; nonetheless, they will discover that it’s really easy to follow Ted’s easy step by step instructions. Currently, both beginner and seasoned ones are utilizing Ted’s woodworking Package. The excellent thing about the thoughts and projects mentioned in Ted’s source is they may be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses into the woodworkers who purchase his package, namely:

  • Free CAD strategy and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking videos

Complete woodworking Carpentry Guide is a two hundred page source which will help beginners learn a whole lot about woodworking. They’ll also be able to advance their carpentry and woodworking abilities via the 150 videos.

Excellently Organized

It is fairly surprising that the content’s in Ted’s woodworking Package are so excellently coordinated although it contains around 16,000 simple woodworking ideas and woodworking projects. Woodworkers will have the ability to find any job of their choice within this bundle quite readily, even though there numerous options.

60-Day Iron Clad Money-back Guarantee

Overall, this item is and those who buy it will be backed by a 60-day guarantee, so when this woodworking bundle fails to satisfy them, they can always get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package may take a slightly long time to down due to its large dimensions. Yet, with a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are several ideas, projects and plans in Ted’s woodworking Resource, so a few found it a bit overpowering and overwhelming. Nonetheless, they did not mind being overrun considering how this package is indeed impressively organized.

The Most Important Thing

woodworking beginner

The bottom line is that Ted’s design bundle is so comprehensive and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking bundle created by Ted McGrath is truly unmatchable and cannot be compared to those other woodworking packages that can be found throughout the net. Ted has done his best to guide them in every conceivable way he can, through simple to understand textual directions, clear images and even movies too.

Therefore, woodworkers who buy Ted’s Woodworking Resource won’t be disappointed with the woodworking ideas and woodworking jobs they will find within. So, it’s definitely worth buying!

Woodwork Crafts – The Beginners Guide To Woodworking Wood Working Shop Plans

Woodworking is 1 hobby that could also be a rewarding career if you like to work with your hands and construct beautiful pieces of furniture from wood. When you learn the woodworking crafts and eventually become a nice woodworking craftsman, you will be able to build all kinds of furniture, (table, beds, and chairs), effortlessly. You can then sell your finished woodworking jobs and make a handsome profit. Wood Working Shop Plans.

It requires time to become skilled in the craft of woodworking. The nice thing about working up to that expert craftsman degree is you’ll be able to build some really wonderful furniture for you and your family to enjoy. Imagine building a custom coffee table or grandfather clock and using it sit in your living space. It’ll be a subject of conversation when you have friends come over to see. They’ll ask: How can you create it? Where did you get the woodworking plans? Just how long can it take to complete the job? What kind of tools did you use? How on earth did you create such a beautiful piece of furniture? As you discuss your job, a feeling of pride will come over you and also do not be surprised if your friends ask you to make one for them too!

The Benefits of Woodworking Wood Working Shop Plans

If you are thinking you are just too old or too young for woodworking, then think again! You’re never too old or too young for such a fun hobby and it is ideal for beginners!

Where to Begin in Woodworking? Wood Working Shop Plans.

Begin with a concept in your mind of what you would like to construct and then get a excellent woodworking project plan that is geared toward beginners. There are numerous little woodworking projects for novices available for purchase from online woodworking merchants. A couple of woodworking program suggestions for you thinking really are a jewelry keyword box, a music box, a clock, a birdhouse, a chessboard or checkerboard, a rocking horse for a kid just to name a few. Of course, you can start out with as expansive a woodworking plan as you pick. However, the odds are if you begin with a little woodworking job at first, you’ll have a better chance of keyword finishing the job.

Your woodworking project plan must include some lists! Length of: woodworking hardware, the amount and type of wood needed, and the required hand tools and power tools to complete the project. Note: A word of caution about buying woodworking tools. Just buy what you want to finish your immediate or upcoming project. This is important especially if you are a beginner and just beginning. Tools aren’t cheap. The newcomer needs good woodworking tools, but you can easily break the bank purchasing a great deal of tools you may not use all that often. If you do buy gear, buy quality. Do a little research and compare goods. Buy the best that you could afford at the time.

Here is my Beginners List of Woodworking Hand Tools:

A claw hammer, wood paneled place, a hand saw, a miter box with a saw (for cutting angles), a coping saw, complete punches, horizontal and straight tip screwdrivers, a rubber mallet (for tapping bits together while not damaging the wood), woodworking straps, a wood vise, a bench plane, a rasp, a tape measure, a 12″ steel ruler, a 6″ steel square, and don’t forget that the wood glue and a brush to spread the wood glue! Obviously, you will need a dry place to work and may need a set of horses to work on.

This is my Beginners List of Woodworking Power Tools:

Circular saw a jigsaw, a table saw, a belt sander (to remove larger quantities of material and level out larger surfaces), an orbital end sander, a 3/8″ electric drill, a 12v or 18v cordless drill.
This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We could go on and on with listing more innovative hand tools and much more woodworking power tools here, but the concept is to buy the essential hand and power tools which beginners will need. You may always increase your arsenal as you gain experience!

Wood Working Shop Plans Advice for Beginner Woodworking Craftsmen:

You now have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you are really excited to begin using your new woodworking tools, but how? Your woodworking project plan must provide you step by step directions and methods to finish your project. However, if you’re not certain about what to do there is help available! There are several places that starting woodworkers can find out about the woodworking craft. First, subscribe to one of the several woodworking magazines available. Every month the authors in woodworking publications do a story about the best way to increase your woodworking craft. When it is showing you how to apply a finish to a completed job, or how to make a mortise and tenon joint, something new can be learned every month. Next, is purchasing instructional DVD such as those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to use a router, how to turn wood jobs, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out the woodworking craft.

|

The Benefits of Woodworking Wood Working Shop Plans

If you’re just beginning and very interested in doing a DIY project for home then, woodworking could be interesting. If you do not have the proper information, education, and skill, you may wind up spending more money and time than you initially meant to spend. As a novice woodworker, you need to have time and the correct tools. Having said, there are a couple of essential aspects you need to remember, before beginning with any woodworking project.

1. If you’re just beginning, you must first need to be very interested in woodworking. Making something new with your own hands is a particular feeling. Don’t begin a job if you are not interested, because this might land you in a terrible place.

2. Consider the main reason behind creating this woodworking project. Choose the uses of this item you’re making.

3. Consider your skills and analyze the time that you have, until you start with a job.

4. Start projects which you can complete. If you’re in the midst of some work, then it’s wise to not start any project at all.

Finding Woodworking Projects and Plans for Beginners Wood Working Shop Plans

If you maintain those essential points in mind before you begin a woodworking project, it is going to become very easy for you to reach success. Woodwork requires preparation as much as it takes effort. So how do you begin?

Getting Started With Woodworking Projects and Strategies for Beginners

Before starting anything, it is very important to opt for the woodworking projects that you want to start with. As a newcomer, always pick a project that has quite a basic construct up or a very simple construction. Some easy to start projects include, bird feeder, benches, shelves, etc.. The moment you find the techniques, you could always move into the next level of woodworking projects, such as cupboards, sheds, and others. Beginning projects should keyword be complicated and less bothersome so that you have a better comprehension of working with woods and their tools. Once the job is selected, start selecting your tools.

Beginners Woodworking Tools, Wood Working Shop Plans

Tools are the means whereby you will win the battle of woodworking. A lot of people believe power tools are requires. However, for novices, basic hand tools can be quite convenient and more than useful in completing a project. If woodworking is your hobby, then some tools that you would demand would be:

1. Workbench – A workbench is required for precise cuts and dimensions. The workbench, when fixed with vises, offer ample space to work. As a primary tool, workbench must be a part of your beginner’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive pins, nails, staples, etc.. A small and lightweight hammer will make matters considerably easy for you. When you buy a hammer, always check the balance between the weight and stand. Always select a hardy, yet lightweight product.

3. Saw – A saw is just another tool that you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws out there on the marketplace. Decide on a size which you could handle.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian kinds and standard flat type. Possessing all of them will help you in advance woodworking. You can also purchase keyword energy screwdrivers since they make the job much faster.

5. Measuring tape – It’s another essential tool which you cannot work without. The measuring tape helps you to measure wood until they may be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work easier for you in a later stage.

7. Drill – Drill helps you create holes in timber. Low wattage power drills will make the task much simple.

8. Other small and basic tools – These include pencils, gum, staple chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Job

There is not any fixed cost on woodworking projects. Dependent on the sort of project that you would like to complete, pricing can be determined. The easy the project, the less price it involves. But at the very beginning purchasing the tools will probably be somewhat hefty. Because of this, it is much better to resolve a budget first on the tools, then keyword on the project. Purchasing the basic tools will ensure that you do not have to buy any more material aside from the wood ply.

Time and Instructions

Instructions are among the principal things that each and every beginner should follow. It is like the woodworking Bible. Instructions guide is quite easy to understand the process, what to do and the way to do it. It keyword is a systematic guide for finishing the project. Time also has an important part in the building of woodworking projects. Woodworking projects demand time and so it’s crucial for a beginner to have ample quantity of time weekly.

Tips and Tricks for Beginners

There aren’t any quick tips or tricks that will make the work easy. Nevertheless, the most essential thing keyword which will help you to achieve success is proper planning. With proper planning and a strategy, it’s likely to achieve success quickly. If you know the purpose of woodworking, the item that you need to construct, the resources you require in order to possess and the average time it’s possible to devote every day; then you’re ready to go.

Conclusion, Wood Working Shop Plans

All these strategies and instruction is likely to make the woodworking projects and strategies for novices quickly to finish. Always ensure you have all of the vital tools, materials, area ready. Read the instructions for constructing a product handy. Proper strategy and preparation can help you to make a great woodworking job for your property.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Working Shop Plans

Folks if you’re trying to find a way to pass time or desire an alternate way to generate money they usually turn to a hobby that they enjoy. It is very exciting to do and anyone can get started.

When doing woodworking in your home there are a lot of jobs one can think of. When starting out you have to be quite cautious when choosing which project to start out with because there are projects which may be too difficult for a newbie. But do not be concerned about that because we are going to give you tips on the right means to begin woodworking as a beginner.

The same as any other hobby woodworking requires some working gear, therefore before you choose your job you have to be aware of whether you have the available resources to work on that job. Try not to invest a lot of cash on purchasing equipment when starting out, buy more equipment as you get more experience and become an expert carpenter. If you enjoy your hobby then there’ll not be any gap between the hand as well as the normal hands.

Starting Your First Woodworking Shop Wood Working Shop Plans

Woodworking at home will provide you time to research unique projects and find out so many things. That’s why it’s very important to invest less money when starting out so that you can manage to make mistakes and at any time learning about various projects.
It is extremely important you know about different types of wood available for making jobs. Expect carpenters use different kinds of wood quality for decorating bits, learning which kind of wood that they use can allow you to prepare the wood you’ll need for specific jobs you might want to pursue.
As soon as you understand the basics of wood choice and the use of different tools you can now employ them in cutting out well wood pieces and placing wood together. Knowing what to do will assist you in creating good projects to satisfy your wants.

Wood Working Shop Plans practice makes perfect so be sure that you practice your work every day if at all possible. Try out a lot of layouts utilizing various tools so that you can get the hang of using the tools. When starting out you may earn a number of errors but with time you will find out how to correctly utilize them and produce quality projects.

|

How to Become a Master Woodworker From Your Own Home Wood Working Shop Plans

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You may begin on a shoestring with a minimum number of gear and equipment. A small home workshop may produce a broad variety of simple projects which will allow you to develop your creative and building skills while rewarding you with artistic and practical wood products that you can appreciate and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to start with, let us talk about where you will do your woodworking, based on the size of your house, you might have the ability to produce a dedicated space into your woodworking activities. This may be a reserved spot on your garage or on your basement. In some cases, a detached shed or outbuilding may be perfect to prepare your first shop. A heated store detached from your house provides one distinct advantage: better dust control. Without sophisticated dust control systems, basement assignments will inevitably produce dust that travels to the living area of your house. This is particularly true in homes with forced air heating systems in which cold air returns found in the basement draw dust up into the upper levels of the house. Another benefit of detached workshops would be, clearly, the sound level. It’s possible to work without disturbing the remainder of the household. A good compromise could be the garage of your home.

This might help minimize the problems of dust and noise, however depending on where you live, a keyword garage layout may not be sensible during extremes of cold or hot weather.

The Benefits of Woodworking Wood Working Shop Plans

YOUR WOODWORKING SETUP

Space is obviously a struggle for the woodworker. Irrespective of where you are in your evolution, everybody from beginner to expert all wishes that they add more space to work in. Wood Working Shop Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top gear can remain in position from project to project. If this setup isn’t impossible, at least attempt to create a bench area where equipment could be saved and pulled out as necessary. If possible plan for inevitable expansion as you get more tools and equipment. At the beginning, set up a seat area where you can shop and use most of your equipment, using a temporary expansion of your activities onto the basement or garage floor.

A rudimentary workbench could be constructed from cheap spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be around waist height. This will enable you to work comfortably while standing. Insert a sturdy shelf beneath the bench to house your hand power tools and a pegboard over the bench to hang other gear. Put in a woodworking at one end of your bench on front to hold small workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Working Shop Plans

The scope of your start-up equipment will be mostly based on your budget. Whether you’ve got large financial resources or you’re starting on a shoestring always buy quality gear. If you can afford it, purchase your quality tools at the local construction and hardware center. If your budget is tight purchase quality used tools from others through Kijiji or alternative regional ads. There are an abundance of quality lightly used programs out there which belong to people who embarked on that one molding project around the home or obtained tools as presents which they won’t ever utilize. You can usually purchase tools for these sellers for less than half of the original cost and save even more money if you create a bundle deal for all their unused equipment. Obviously, acquiring tools from private individuals will take additional time and possibly travel expenses. Weigh the benefits of traveling around town to save a few added dollars on a cheap piece of gear. The excess cost of travel and time in these situations is generally justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers later on.
For smaller acquisitions, a visit to your building center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled workers worked using a minimal amount of hand gear yet produced sophisticated and intricate pieces. Concentrate on developing your abilities with your start-up set of resources and avoid lamenting about the equipment you wished you’d.
Here’s a checklist of the useful tools You Will Need to get started:
Safety Gear: Start as expected by eye protection. Get a decent pair of safety glasses which also offer you some side protection to your eyes. Purchase a quality acrylic set that’ll be scratch resistant. Progressive scratching of cheaper plastic pairs will eventually hamper your vision and affect security. Avoid wearing goggles at a workshop. Most impair eyesight and dust up quickly. You can avoid wearing all of them together if you find them uneasy.

The next piece of critical safety gear that you’ll need entails ear protection. Ear protection is often overlooked by the novice woodworker yet is almost as critical as eye protection. Woodworking can be long-term and noisy exposure to those sound levels may affect hearing and lead to tinnitus and other hearing losses. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am all set!

Power Hand Saw: Often known as a skill saw after the popular name, this can prove to be the most flexible instrument in a start-up workshop. In reality, at the hands of a professional, a power hand saw can be employed to construct an whole property. Eventually, you’ll want to purchase a table saw, but for now, a power hand saw for the woodworker on a budget enables him to perform cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Stay away from cheap unknown brands. All these are inclined to cut back and will burn out before you start your next project. After selecting the right saw put in an excellent blade. Most saws include a starter blade of lesser quality even if they are a good saw. Keep this blade as a backup and put in a quality blade with carbide teeth. Begin with a hybrid blade. All these possess a balanced tooth count that works well with both crosscuts and ripping.

Power Jig Saw: A jigsaw will include great flexibility to a woodworking. |} Curved cutting is where the jigsaw excels. This versatile instrument can’t just cut corners. It’s perfect for cutting holes in wood also like manage slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more flexible but a quality floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an range of blades for your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill that runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss within the conventional 3/8 inch version. Down the road, the 1/2 inch version will prove to be more versatile. Through tough lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills tend to get very short run times and need to be recharged often. Their long-term battery life tends to be bad and to make matters worse keyless chucks come loose and slip often. This is one annoyance you don’t want on your workshop. Buy an assortment of quality carbide tipped drill bits that are kept in a holder tagging each drill bit size. Make a habit of returning each drill piece to its potential slot in the holder after every use. Last, get a set of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you picked an 18-volt version.

Hammer: The hammer remains as the most flexible tool in the store, and frequently the most misunderstood one. |} By the way, the hammer is the one instrument where most workshop accidents happen. Although the most frequent, hammer accidents are usually of a minor nature, varying from bruised fingers to the temporary loss of a fingernail. Hammers greatly vary in price and quality. So what is the difference between a inexpensive hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The good hammer is balanced, doesn’t rust and comes with a comfortable handle. Most hammers in the high-quality range offer ceramic or metal handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The head usually comes loose and the tool becomes useless. Select a title brand quality hammer at the 16-ounce scope for overall work and also a smaller finishing hammer for more intricate work. Avoid using big framing hammers in the workshop and any with dimpled mind tips. These kinds of hammers are more suited to rough framing tasks and are unsuitable from the workshop.

Palm Sander: Purchase a 1/4 sheet . This tiny power tool can handle pretty much any sanding requirements you’ve got as a novice woodworker. As your woodworking abilities evolve, you will probably update to a floor model disc and belt sander. However, for the time being, the ever-versatile palm sander may clean up edges, cross cuts and perhaps even limited quantities of surface area. As you embark on your first few projects you’ll find that your palm sander using just a bit of effort can transform rough looking inventions into virtual functions of art! You can use your palm sander to sand and form rough boards using 100 grit paper and later finish your job with 200 or 300 grit paper. Purchase an range of sandpaper sheets with an excess supply of 100 grit paper. You’ll get that this grade of paper that the most versatile on your store.

Hand Planes and Chisels: These classic tools are a must in every workshop. |} Although low tech in theory, these tools allow you to taper edges, sew high stains and correct any imperfections in wood pieces. {Start with a standard number 4 airplane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you will need clamps for glue-ups and simply to hold off your wood pieces as you work on them. Unfortunately, superior clamps are costly and it normally takes the beginner woodworker a few years to accumulate a detailed set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe was replaced with long steel shafts, however, the structure is still the same. Get a set of the longest clamps that you can spend. You can get in touch with them for smaller glue jobs and expand them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of your seat is ideal for holding smaller jobs for sanding, filing, and gap cutting with your jigsaw. Buy a woodworking vice with replaceable wooden clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces can securely hold wood pieces without marring or damaging them. Many of the greater vices offer you quick release mechanisms that enable the user to rapidly open and close the limbs without tedious handle turning. The wood clamping surfaces in your vice will occasionally need replacement. I prefer to utilize soft walnut in my vices which won’t crush or damage many of the various woods that I utilize. Whether I am working in soft pine or hard walnut, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape measure is going to be one of the most often used tools. Buy a fantastic quality name brand tape measure with a broad tape usually in the 25-foot selection. Although in your store you might not use the tape at these lengths, the larger tape steps offer more rigid tapes which will not flop around and slip off the ending of boards. Assessing when you’re on your own will be a lot simpler, and naturally, quality tape measures can last for several decades.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the timber. Harder pens like 2B’s can scratch softwoods and will require additional sanding. Avoid oversized carpenter’s pencils. Their big flat leads are just too coarse for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other handy tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools will help you in marking the ideal angles as well as chemical angles. Get the number three and two Robertson set. I discover the Robertson format works best for many woodworking projects and is the most compatible with a drill powered bits. Last, get a set of 12-inch wood documents. Get a horizontal one and a round-edged one. You’ll find them perfect for rough shaping and fixing small mistakes along the way.

Adhesives: Not all glues are made equal. Stay away from cheap home brands marketed as carpenter’s glue. The cost of adhesive through all of your projects is a little cost consideration. For that reason, it makes sense to decide on the very best. I also have discovered over time that I get the best results with both indoor and outdoor projects once I use quality outside grade glue. All these resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Wood Working Shop Plans

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of hurried lives, smartphones, and time-starved livelihood. With a minimum investment in the most rudimentary equipment and tools, anyone can learn the rewarding skills of his time-tested avocation and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Woodworking

Along with stone, clay and animal parts, wood was one of the first materials worked by early humans. Microwear analysis of the Mousterian stone tools used by the Neanderthals show that many were used to work wood. The development of civilization was closely tied to the development of increasingly greater degrees of skill in working these materials.

Among early finds of wooden tools are the worked sticks from Kalambo Falls, Clacton-on-Sea and Lehringen. The spears from Schöningen (Germany) provide some of the first examples of wooden hunting gear. Flint tools were used for carving. Since Neolithic times, carved wooden vessels are known, for example, from the Linear Pottery culture wells at Kückhofen and Eythra.

Examples of Bronze Age wood-carving include tree trunks worked into coffins from northern Germany and Denmark and wooden folding-chairs. The site of Fellbach-Schmieden in Germany has provided fine examples of wooden animal statues from the Iron Age. Wooden idols from the La Tène period are known from a sanctuary at the source of the Seine in France.

Video: Woodworking Tools