Wood Workshop Plans Free | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers using some quite remarkable ideas and projects.

The package has various qualities which allow it to be the”#1 woodworking Resource” and some of those attributes along with a couple petty pitfalls will be assessed in this review.

woodworking workshop

What Kind of Projects Does Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this innovative package, she’s also an instructor and a member of AWI as well. Ted’s woodworking Bundle Includes a varied selection of 16,000 simple ideas and projects, such as:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it really simple to begin woodworking when they’re after because all the ideas and projects Ted’s resource are simple to understand and simple. Ted McGrath spent two years exploring so he could gather enough material for an extensive package, and he ended up making a really’complete’ woodworking resource.

Many might still appear unsure whether they should be buying Ted’s woodworking Package, despite all of the positive traits. The myriad of resources available online make it even more difficult to make the ideal option. There are actually many things that place Ted’s woodworking Bundle apart from other people.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Acceptable for Woodworkers of All Levels

Woodworkers of all degrees will be able to profit from Ted’s woodworking Package. Those that are just getting started will discover the thoughts and jobs in Ted’s bundle quite easy. Without doubt, intricate carpentry is involved; nonetheless, they will find it really easy to follow Ted’s easy step by step instructions. Currently, both novice and seasoned ones are utilizing Ted’s woodworking Package. The great thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very valuable bonuses into the woodworkers who purchase his package, namely:

  • Free CAD plan and drawing viewer
  • The Complete woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is two hundred page source which helps beginners learn a whole lot about woodworking. They will also be able to advance their woodworking and carpentry abilities via the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized although it contains around 16,000 easy woodworking ideas and woodworking projects. Woodworkers will have the ability to find any job of their choice in this package quite readily, though there numerous options.

60-Day Iron Clad Money-back Guarantee

In general, this product is and people who purchase it will be backed by a 60-day warranty, so when this woodworking package fails to meet them, they can always get their money back.

The Cons

Requires Time to Download

Ted’s woodworking Package can take a marginally long period to down due to its large size. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

Since there are several ideas, projects and plans at Ted’s woodworking Resource, so some found it a bit overpowering and overwhelming. Nevertheless, they didn’t mind being overwhelmed considering the fact that this bundle is so impressively organized.

The Most Important Thing

woodworking beginner

The most important thing is that Ted’s design bundle is so thorough and vast that it contains just about every woodworking project a woodworker may be interested in constructing.

This woodworking package created by Ted McGrath is truly unmatchable and can’t be compared to all those other woodworking packages that are available across the net. Ted has done his best to guide them in every conceivable way he can, through easy to understand textual directions, clear pictures and even movies too.

Therefore, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking thoughts and woodworking jobs they will find within. So, it is certainly worth buying!

This is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face guard, hearing protectors, Nitrile disposable gloves|}
We can go on and on with list more woodworking hand tools and much more woodworking power tools here, but the concept is to purchase the crucial hand and power tools that beginners will need. You can always increase your arsenal as you gain experience!

Wood Workshop Plans Free Advice for Beginner Woodworking Craftsmen:

At this point you have a great new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to start using your woodworking tools, but how? Your woodworking project plan must provide you step by step directions and techniques to complete your project. But if you are unsure about what to do there is help available! There are lots of areas that starting woodworkers can find out about the woodworking craft. First, subscribe to a few of the many woodworking magazines out there. Every month the writers in woodworking magazines do a story on how best to increase your woodworking craft. Whether it is showing you how you can apply a finish to a completed job, or how to create a mortise and tenon joint, something new can be learned every month. Next, is buying instructional DVD such as the ones made by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover topics such as: Assessing your table saw, how to use a router, how to turn wood projects, turning wooden bowls, and wood finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to find out about the woodworking craft.

|

The Benefits of Woodworking Wood Workshop Plans Free

If you are a beginner and very interested in doing a DIY project for home afterward, woodworking could be interesting. If you do not have the proper information, instruction, and ability, you may wind up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have space, time and the appropriate tools. Having mentioned, there are a few essential aspects you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first have to be somewhat interested in woodworking. Making something new with your own hands is a special feeling. Don’t start a project if you’re not interested, as this may land you at a bad place.

2. Consider the main reason behind making this woodworking project. Decide on the uses of the thing you’re making.

3. Consider your skills and examine the time you have, before you start with a job.

4. Start projects that you can complete. If you are in the middle of a work, then it’s wise not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Wood Workshop Plans Free

If you keep those essential things in mind before beginning a woodworking project, it is going to become very simple for you to reach success. Woodwork requires preparation as much as it requires effort. So how can you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to opt for the woodworking jobs you want to begin with. As a newcomer, always select a project that has a very basic build up or a very simple construction. Some easy to start projects comprise, bird feeder, chairs, shelves, etc.. As soon as you find the techniques, you could always proceed to the next level of woodworking jobs, such as cabinets, sheds, along with others. Beginning projects should always keyword be less complicated and less frustrating so that you have a better comprehension of working with forests and their resources. Once the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Wood Workshop Plans Free

Tools are the means whereby you will win the battle of woodworking. Many people think that power tools are requires. But for beginners, basic hand tools can be very handy and more than useful in completing a project. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is required for exact cuts and measurements. The workbench, when fixed with vises, provide ample space to operate. As a key tool, workbench must be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is a vital tool for woodworks. It helps you to drive pins, nails, staples, etc.. Even a small and lightweight hammer will make matters much easy for you. When you buy a hammer, constantly check the balance between the weight and endure. Always pick a sturdy, yet lightweight product.

3. Saw – A saw is another tool that you can’t live without while woodworking. |} This tool can help you to cut woods at different sizes. There are different types of saws available on the marketplace. Choose a size which you can deal with.

4. Screwdriver – Screwdrivers can be found in different shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you ahead of time woodworking. You might also purchase keyword energy screwdrivers as they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to quantify wood until they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For these projects, you demand a wrench. Nonetheless, this isn’t a tool for novices, but having it would make work simpler for you in a later stage.

7. Drill – Drill makes it possible to make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and basic tools – These include pencils, gum, staple gum, level, erase, first aid kit and shop vac.

Costing and Budget for the Project

There’s not any fixed cost on woodworking jobs. Dependent on the sort of project you would like to finish, pricing could be set. The easy the job, the less price it involves. But at the beginning purchasing the tools will be a little hefty. Therefore, it is better to resolve a budget first on the resources, then keyword on the undertaking. Buying the fundamental tools will ensure that you do not need to purchase any more material aside from the wood ply.

Time and Instructions

Directions are one of the primary things which every newcomer should follow. Instructions guide is quite simple to comprehend the procedure, what to do and how to get it done. It keyword is a systematic guide for completing the job. Time also has a significant role in the building of woodworking jobs. Woodworking projects require time and so it’s crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most essential thing keyword that can help you to reach success is proper planning. With appropriate planning and a strategy, it is possible to achieve success immediately. If you know the purpose of woodworking, then the item you need to build, the resources you require to possess and the typical time you can devote daily; then you are ready to go.

Conclusion, Wood Workshop Plans Free

All these strategies and instruction will make the woodworking projects and plans for beginners quickly to finish. Always ensure that you have all the vital tools, materials, space ready. Read the instructions for building a product handy. Proper strategy and planning will help you to earn a fantastic woodworking job for your property.

|

Finding Woodworking Projects and Plans for Beginners Wood Workshop Plans Free

Folks when looking for a way to pass time or want an alternate way to make money they generally turn into a hobby they enjoy. It’s very exciting to do and anyone can begin.

When doing woodworking at home there are lots of jobs one can consider. When starting out you need to be very careful when choosing which job to begin with since there are jobs which can be too difficult for a newbie. But do not worry about that because we are going to provide you guidelines on the ideal way to start woodworking as a newcomer.

Just like any other hobby woodworking requires some working equipment, therefore before you pick your project you have to be aware of if you’ve got the available tools to work on that job. Try not to invest a lot of cash on purchasing equipment when starting out, buy more gear as you gain more experience and become a professional carpenter. If you enjoy your hobby then there will not be any gap between the hand and the hands.

How to Become a Master Woodworker From Your Own Home Wood Workshop Plans Free

To keep yourself updated you must disseminate with various brands tools and forests. Woodworking at home will provide you time to explore different projects and learn a lot of things. That is why it’s important to spend less money when starting out so that you can afford to make errors and at any time learning about different projects.
It is very important you know about the different kinds of wood available for creating jobs. Expect carpenters use several types of wood quality for decorating pieces, learning what kind of wood they use will help you prepare the wood you will need for certain jobs you may choose to pursue.
As soon as you know the fundamentals of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and placing wood together. Knowing what to do will help you in building good jobs to satisfy your needs.

Wood Workshop Plans Free practice makes perfect so be sure you practice your work daily if at all possible. Try out lots of layouts using various tools so you can get the hang of working with the tools. When starting out you can make a range of mistakes but with time you will learn how to correctly use them and create quality projects.

|

Woodwork Crafts – The Beginners Guide To Woodworking Wood Workshop Plans Free

Woodworking as a hobby can be among the most rewarding experiences you’ll ever enjoy. You can begin on a shoestring with a minimum amount of gear and equipment. A little home workshop can produce a wide array of simple projects that will allow you to develop your creative and construction skills while rewarding you with practical and artistic wood products which you are able to enjoy and also give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the gear you ought to begin with, let’s talk about where you’ll perform your woodworking, based on the size of your house, you might be able to produce a dedicated space into your woodworking activities. This may be a reserved spot in your garage or in your basement. In some cases, a detached shed or outbuilding might be ideal to prepare your first store. A heated store detached from your home provides one distinct advantage: better pest management. Without complex dust control systems, basement assignments will inevitably produce dust that travels into the living area of your home. This is very true in homes with forced air heating systems in which cold air returns found in the cellar draw dust up into the top levels of the home. Another advantage of detached workshops would be, of course, the sound level. It’s possible to work without disturbing the rest of the family. A good compromise could be the garage of your home.

This can help minimize the problems of dust and sound, however based on where you reside, a keyword garage workshop might not be sensible during extremes of hot or cold weather.

How to Become a Master Woodworker From Your Own Home Wood Workshop Plans Free

YOUR WOODWORKING SETUP

Space is always a challenge for the woodworker. Regardless of where you are in your evolution, everybody from beginner to expert all wishes that they include more space to work in. Wood Workshop Plans Free if you’re able to have a dedicated spot for a marathon all the better. Floor gear and bench top equipment can remain in position from project to project. If this installation isn’t hopeless, at least attempt to make a chair area where equipment can be saved and pulled out as needed. If at all possible plan for inevitable expansion as you acquire more tools and gear. At the start, establish a bench area where you are able to store and use most of your equipment, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench can be constructed from inexpensive laminated timber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench should be around waist height. This will let you work comfortably while standing. Add a sturdy shelf beneath the bench to house your hand power tools along with a pegboard over the bench to hang other equipment. Put in a woodworking at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Wood Workshop Plans Free

The reach of your startup equipment will be mostly based on your financial plan. Whether you have got big financial resources or you are starting on a shoestring always buy quality equipment. If you can afford it, then buy your quality tools at the local construction and hardware center. If your budget is tight buy quality used tools from others through Kijiji or alternative regional ads. There are plenty of quality gently used tools out there which belong to people who stumbled on that one molding job around the home or obtained tools as presents which they won’t ever utilize. You can usually buy tools for all these sellers for under half the initial cost and save even more money if you make a bundle deal for all their unused equipment. Of course, getting tools from private individuals will require additional time and possibly travel expenditures. Weigh out the advantages of traveling around town to save a few extra dollars on a inexpensive piece of gear. The extra expense of travel and time in these scenarios is usually justified when buying large ticket items such as table saws, bandsaws or high ended tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked with a minimum amount of hand equipment yet generated sophisticated and intricate pieces. Focus on developing your abilities with your startup set of resources and avoid lamenting about the gear you wished you had.
Here is a checklist of the more useful tools You Will Need to get started:
Safety Gear: Start as expected with eye protection. Get a nice pair of safety glasses which also offer you some side protection for your eyes. Buy a quality acrylic collection that’ll be scratch resistant. Progressive scratching of cheaper vinyl pairs will eventually impair your vision and affect security. Avoid wearing gloves at a workshop. Most impair vision and dust up fast. You may avoid wearing them all together if you find them uncomfortable.

The next bit of critical safety equipment that you’ll need involves ear protection. Ear protection is often overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking may be noisy and long-term exposure to those noise levels can affect hearing and lead to tinnitus and other hearing losses. Also, I find that wearing hearing protection combats fatigue.

Most employees tire quicker when exposed to high noise levels. Select powerful hearing protection which you find comfortable and effective. Last, put on a cap to keep the dust out of your hair. I prefer a simple ball cap along with my ear muffs and eye protection. I’m keeping the dust out of my hair. I am good to go!

Power Hand Saw: Often referred to as a skill saw after the popular name, this may end up being the most flexible instrument in a startup workshop. In fact, at the hands of an expert, a power hand saw could be used to build an whole property. Eventually, you are going to want to buy a table saw, but for the time being, a power hand saw for the woodworker on a budget enables him to do cross cuts, tear cuts and even intricate angle cuts. As mentioned before get a quality brand saw. Avoid cheap unknown brands. All these are inclined to cut inaccurately and will burn out before you start your next project. After choosing the right saw put in an excellent blade. Most saws come with a starter blade of lower quality even if they are a fantastic saw. Keep this blade as a copy and install an excellent blade with carbide teeth. Start with a hybrid blade.

Power Jig Saw: A jigsaw will add great versatility to your woodworking. |} Curved cutting is the point where the jigsaw excels. This versatile instrument can’t only cut curves. It’s ideal for cutting holes in timber also like handle slots. Eventually, you’re going to want to get a ring saw. Bandsaws are much more versatile but a excellent floor unit can be expensive. A jigsaw may be a good stop gap for the novice woodworker.

Purchase an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase an excellent drill which runs on at 12 volts, nevertheless, 18 volts is better. |} Get one with a keyless chuck and if it’s in your budget consider a 1/2 inch toss over the standard 3/8 inch version. Down the road, the 1/2 inch version will end up being versatile. Through hard lessons learned, I have found that purchasing quality, in this case, is much more critical than ever. Cheaper drills have a tendency to get very short run times and need to be recharged frequently. Their battery life will be poor and to make matters worse keyless chucks come loose and slip often. This is 1 annoyance you don’t want on your workshop. Purchase an range of quality carbide tipped drill bits that are kept in a holder labeling each drill bit size. Make a habit of returning every drill piece to its potential slot in the holder after every use. Lastly, get a set of tough steel driver bits. Your drill may also be a versatile screwdriver, especially if you picked an 18-volt model.

Hammer: The hammer stays as the most flexible tool in the store, and often the most misunderstood one. |} Incidentally, the hammer is the one tool where most workshop injuries occur. Although the most frequent, hammer accidents are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers greatly vary in quality and price. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, does not rust and features a comfortable grip. Many hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers generally have wood grips with poor joints between the handle and head. The mind typically comes loose and the tool becomes useless. Select a name brand quality hammer in the 16-ounce range for general work and also a smaller completing hammer for more complex work. Avoid using large framing hammers at the workshop and any with dimpled mind tips. These types of hammers are more appropriate to rough framing tasks and therefore are unsuitable from the workshop.

Palm Sander: Buy a 1/4 sheet . This little power tool can handle just about any sanding requirements you have as a novice woodworker. As your woodworking skills evolve, you’ll likely update to a floor version disk and belt sander. But for now, the ever-versatile palm sander may clean up edges, cross cuts and even limited amounts of surface area. As you embark on your first few projects you might find your palm sander using just a little bit of effort can transform rough looking inventions into virtual works of art! You can use your palm sander to sand and shape rough boards using 100 grit paper and after finish your work with 200 or even 300 grit paper. Purchase an assortment of sandpaper sheets using an excess supply of 100 grit paper. You’ll get this caliber of paper the most versatile in your store.

Hand Planes and Chisels: These classic tools are essential in each workshop. |} Though low tech in theory, these tools enable you to taper borders, flatten high spots and correct any imperfections in wood pieces. {Begin with a standard amount 4 airplane and an range of quality chisels varying in width from 1/4 inch to 1 inch.

Clamps: Sooner or later you will want pliers for glue-ups and simply to hold down your wood bits as you operate on them. Unfortunately, superior clamps are costly and it usually requires the novice woodworker a couple of years to collect a comprehensive set of wood clamps. Begin with a pair of extended”pipe” clamps. Today the pipe has been replaced with extended steel shafts, but the structure is still the same. Receive a pair of the maximum clamps that you can afford. You can get in touch with them for smaller adhesive jobs and enlarge them to their entire length for larger projects.

Shop Vice: A store vice installed in the end of the bench is ideal for holding smaller tasks for trimming, filing, and gap cutting with your jigsaw. Buy a woodworking vice with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices with their wood clamping surfaces may securely hold wood bits without marring or damaging them. Many of the greater vices offer you rapid release mechanisms that enable the consumer to rapidly open and close the limbs with no tedious handle turning. The timber clamping surfaces on your vice will periodically require replacement. I would rather utilize soft walnut in my vices that will not crush or damage many of the various forests that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces function the best.

Tape Measure and Marking Device: On your workshop, the ever-humble tape step is going to be among your most frequently used tools. Purchase a fantastic excellent name brand tape measure with a wide tape typically from the 25-foot range. Even though in your shop you might not use the tape in these spans, the bigger tape steps provide more rigid tapes that will not flop around and slip off the end of planks. Assessing when you are on your own will be a great deal easier, and naturally, quality tape measures can endure for many years.

When marking jobs, I prefer a sharp great old-fashioned HB pencil. An HB pencil will produce a wonderful mark without scratching the timber. Avoid oversize carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Additional Tool and Materials: Here are a few other useful tools to round out your starter workshop: Purchase a T-square, place square and rate square. These inexpensive tools can assist you in marking the ideal angles in addition to chemical angles. Get the number three and two Robertson set. I discover that the Robertson format works great for most woodworking projects and is the most compatible with a drill powered pieces. Last, get a set of 12-inch wood files. The cost of adhesive through all your jobs is a minor cost consideration. Therefore, it makes sense to go with the best. I have also found over time that I receive the best results with both indoor and outdoor projects once I use quality outdoor grade adhesive. All these resin-based compounds unlike conventional water-based wood glue, won’t break down and neglect with moisture.

CONCLUSION, Wood Workshop Plans Free

The peaceful satisfaction of woodworking is a wonderful adventure in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment in the most rudimentary equipment and tools, anyone can learn the profitable skills of his time-tested hobby and enjoy project after project!

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

  • Bespoke founder, Keith Morgan, kicks off Leadership Forum at IWF

    ATLANTA, GA -- Keith Morgan knows a thing or two about design.   He also has a knack for employing, training and retaining a talented staff.   His company, Bespoke, caters to an elite international clientele base, emphasizing elegant custom design and spectacular craftsmanship. Not only has Bespoke won multiple Craftsman’s Challenge awards, but also Morgan has earned a reputation for his marketing prowess in the highly competitive world of catering to luxury consumers.   Morgan will be the keynote presenter to kick off the Woodworking Network Leadership Forum on August 21 (the day before IWF opens) at the Georgia World Congress Center. 

    In his keynote titled, Leadership by design, Morgan will discuss the importance of professional design in all aspects of your business including design, manufacturing, and marketing.   According to Morgan, it is essential to integrate a solid design professional or professionals within your front office operations. The organization must have individuals who have experience in the interior design industry but also be able to take on and understand construction techniques at the shop floor level.

    Bespoke has one multiple Craftsman's Challenge Awards.

    His presentation at the 2018 Cabinets & Closets Conference & Expo in Pasadena, Selling directly to the luxury consumer, received outstanding feedback from the audience.  Morgan stresses that it is critical to employ professionals that understand market-viable design and long-term design trend history.   Morgan will also discuss the importance of hiring talented craftspeople and what Bespoke does to retain them indefinitely. 

    He will also address how Bespoke has successfully linked itself to other luxury brands and how you can link your product with other luxury brands to “ride on the coattails of their recognized luxury brand status."
     
    Woodworking Network Leadership Forum at a glance
    Target Audience: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors
    Sponsor:  JB Cutting, Inc.
     
     
    9:00 AM  – 10:00 AM - Keynote -- Leadership by Design (presented by Keith Morgan)
     
    10:00 AM - 11:00 AM - Building Bigger, Taller and Stronger with Wood: How Mass Timber is Rolling out in the U.S.
    Products such as cross laminated timber, popular in Europe for more than 20 years, are now making their way into North America in a serious way, with manufacturers in Oregon, Washington, Montana and Alabama coming onstream and innovative new timber buildings appearing in many of our cities. In this presentation, Iain Macdonald, Associate Director of the TallWood Design Institute, will describe mass timber and how it is changing the way America builds. He will cover manufacturing, technical barriers and how they are being overcome, expectations for market growth, and what it means for providers of non-structural wood products.
     
    11:00 AM - Noon - A Unique Technology, in a Unique Part, for a Unique Industry
    Each item is unique, and in woodworking, this is even truer than any other industry. But how could we identify the unique history of each unique part? And how can we use that information to help measure quality, control process flows, and improve inventory accuracy? Using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  Henry Nisiobincki will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.
     
    Noon - 1:00 PM - Networking Lunch
     
    1:00 PM - 2:00 PM - Nanotechnology: Small to the World, Big to the Industry
    There's an unprecedented multidisciplinary convergence of scientists dedicated to the study of a world so small, we can't see it - even with a light microscope. Mike Hetherman, president, owner and CEO of Willis - a North American distributor of globally branded building materials and a prominent voice in the design community, will address the field of nanotechnology, the realm of atoms and nanostructures. Nanotechnology is so new, no one is really sure what will come of it. What we do know is that nanotechnology is making its way into the world of building materials. Join us for an intriguing session which will outline the basics of nanotechnology and how it’s being used to revolutionize our industry.
     
    2:00 PM - 3:00 PM - The Business Case for Diversity
    Diversity is quite possibly the best source of innovation and creativity in our industry, according to Whitney Pyle who is also a Woodworking Network Class of 2017 40 under 40 winner. Whitney will discuss her career path through the industry as a female. "The construction and woodworking industries as a whole lack diversity," said Pyle.She said many times when she attended industry events people would presume she was just somebody's spouse. "Together, we will unpack the reasons why, we’ll discuss why it’s important to change it, what we can do to change it," said Pyle. "We’ll also discuss what steps to take to ensure all people become integrated and engaged in our organizations and our industry."
     
    3:00 PM - 4:00 PM - Understand the New Consumer
    This presentation lead by Mike Hetherman, will unearth two very distinct types of consumers – the NEO and the Traditional – and how they are powering our economy.  Discover why targeting one versus the other will drastically change your sales, marketing and pricing strategies forever. You’ll learn who spends the most, most frequently, and find out more about their values, attitudes and, ultimately, buying behavior and communication preference.  Most importantly, you’ll learn how to quickly connect with your customer, close jobs faster, work less and maximize your profits.
     
    4:00 PM - 5:00 PM - 40 under 40 leadership panel:
    Woodworking Network’s 40 under 40 award recognizes those individuals that have made a difference in their careers, their companies, their communities and to the industry.  Benchmarks include productivity, profitability, social good, innovation, peer inspiration, product development and organizational leadership. 
     
    This illustrious panel, made up of members of the Class of 2018 and alumni, will address their leadership journey and offer insights into the future of the industry.
     
    The Leadership Forum is followed at 5:30 PM by a Leadership reception to recognize the 40 under 40 Class of 2018. 
     
    All registrants for the Leadership Forum are invited to attend. Registration to attend IWF is included in the cost of admission.  Click HERE to register for the Leadership Forum
     

     

  • Contrat historique pour Conception R.P.

    Conception R.P. commence la conception puis la fabrication d’un projet d’envergure aux États-Unis pour un fabriquant de bois lamellé-croisé ou sous l’acronyme CLT (Cross Laminated Timber). Le projet se réalisera sur une période d’un peu plus d’un an et créera près de 10 à 15 emplois à temps plein dans la ville de Québec.
     
    « Nous sommes fiers de travailler avec un tel joueur dans l’industrie. L’aboutage de bois leur permettra d’utiliser des planches de bois plus courtes pour leur besoin et ainsi leur donner une plus grande flexibilité sur le plan des achats et de la production » Louis-André Levesque, Responsable du développement des affaires chez Conception R.P.
     
    L’usine comprendra un système de dépilage des bois, un système de vision pour analyser les défauts, des scies automatiques à haute vitesse pour couper les défauts, le système d’aboutage à haute vitesse CRP-3000, un grand convoyeur de séchage des bois, des ébouteuses de précisions, un empileur de paquets automatique puis un système de sanglage des paquets.
     

Games Workshop

Games Workshop Group PLC (often abbreviated as GW) is a British miniature wargaming manufacturing company based in Nottingham, England. Games Workshop is best known as developer and publisher of the tabletop wargames Warhammer Age of Sigmar (previously Warhammer Fantasy Battle), Warhammer 40,000, The Lord of the Rings Strategy Battle Game and The Hobbit Strategy Battle Game (now sold as The Middle Earth Strategy Battle Game). It is listed on the London Stock Exchange and is a constituent of the FTSE 250 Index.

Founded in 1975 at 15 Bolingbroke Road, London by John Peake, Ian Livingstone, and Steve Jackson (not to be confused with U.S. game designer Steve Jackson), Games Workshop was originally a manufacturer of wooden boards for games including backgammon, mancala, Nine Men's Morris, and Go.[3] It later became an importer of the U.S. role-playing game Dungeons & Dragons, and then a publisher of wargames and role-playing games in its own right, expanding from a bedroom mail-order company in the process.[4]

In order to promote their business and postal games, create a games club, and provide an alternative source for games news, the newsletter Owl and Weasel[5] was founded in February 1975. This was superseded in June 1977 by White Dwarf.[6]

Video: Woodworking Projects