Woodcraft Project Plans | Woodworking Tips

Adept woodworker Ted McGrath made the Ted’s Woodworking Package as a valuable resource which would present woodworkers with some quite remarkable thoughts and projects.

The bundle has various qualities that make it the”#1 woodworking Resource” and a few of those attributes alongside a couple petty drawbacks will be evaluated in this review.

woodworking workshop

What Kind of Projects Can Ted’s woodworking Package Contain?

Ted McGrath, the mastermind who created this revolutionary bundle, she’s also an educator and a member of AWI as well. Ted’s woodworking Bundle contains a varied selection of 16,000 easy ideas and projects, including:

  • Arbor Plans
  • Barn Plans
  • Cabinet Plans
  • Dog House Plans
  • Garage Plans
  • Swing Set Plans
  • Windmill Plans
  • Many more

woodworking ideas

Woodworkers will find it quite easy to begin woodworking whenever they are following because most of the ideas and jobs Ted’s source are simple to comprehend and simple. Ted McGrath spent two years exploring so that he could gather enough material for an extensive bundle, and he ended up creating a really’complete’ woodworking resource.

Many might still appear unsure whether they need to be buying Ted’s woodworking Package, regardless of all the positive traits. The myriad of resources available online make it more challenging to make the ideal choice. There are in fact many things that place Ted’s woodworking Package besides others.

Ted’s woodworking Project �” Pros and Cons

The Pros

Ideas Suitable for Woodworkers of All Levels

Woodworkers of all levels will get to benefit out of Ted’s woodworking Package. People who are just getting started will find the ideas and jobs in Ted’s bundle quite simple. Without doubt, intricate carpentry is involved; however, they will find it really simple to follow Ted’s easy step by step directions. Currently, both novice and experienced ones are utilizing Ted’s woodworking Package. The excellent thing about the ideas and projects mentioned in Ted’s resource is that they can be completed in a very short time.

woodworking projects that sell

Useful Bonuses

Ted McGrath also offers three very useful bonuses to the woodworkers who buy his package, namely:

  • Free CAD strategy and drawing viewer
  • The Total woodworking Carpentry Guide
  • 150 premium woodworking movies

Complete woodworking Carpentry Guide is a two hundred page resource that helps beginners learn a lot about woodworking. They will also be able to advance their carpentry and woodworking skills through the 150 videos.

Excellently Organized

It’s fairly surprising that the material’s in Ted’s woodworking Package are so excellently organized even though it comprises around 16,000 simple woodworking ideas and woodworking projects. Woodworkers are going to be able to locate any project of their choice within this bundle quite easily, even though there so many choices.

60-Day Iron Clad Money-back Guarantee

In general, this item is and people who purchase it’ll be backed by a 60-day guarantee, so when this woodworking package fails to satisfy them, they always have the ability to get their money back.

The Cons

Takes Time to Download

Ted’s woodworking Package can take a slightly long time to down because of its large dimensions. Nonetheless, using a high-speed online connection it should download within a couple of minutes.

Slightly Overwhelming

As there are so many ideas, projects and plans at Ted’s woodworking Resource, so a few found it somewhat overpowering and overwhelming. Nevertheless, they did not mind being overrun considering how this bundle is indeed impressively organized.

The Bottom Line

woodworking beginner

The bottom line is that Ted’s woodworking package is so thorough and vast it contains just about every woodworking project a woodworker might be interested in building.

This woodworking bundle made by Ted McGrath is really unmatchable and cannot be compared to all those other woodworking bundles that can be found across the internet. Ted has done his best to guide them in every conceivable way he can, through simple to comprehend textual instructions, clear pictures and even movies as well.

Thus, woodworkers who purchase Ted’s Woodworking Resource won’t be disappointed with all the woodworking ideas and woodworking projects they will find within. So, it’s certainly worth buying!

Here is my Beginners List of Woodworking Safety Equipment:

Safety glasses, clear safety goggles, dust masks, face shield, hearing protectors, Nitrile disposable gloves|}
We can go on and on with listing more woodworking hand tools and much more woodworking power tools , but the concept is to purchase the essential hand and power tools which novices will need. You may always increase your toolbox as you get experience!

Woodcraft Project Plans Guidance for Beginner Woodworking Craftsmen:

You now have a fantastic new hobby in woodworking, you’ve purchased your woodworking project plan and you’re really excited to begin using your new woodworking tools, but how? Your woodworking project plan should supply you step by step directions and methods to finish your project. But if you’re unsure about what to do there is help available! There are several areas that starting woodworkers can find out about the woodworking craft. First, subscribe to one of those many woodworking magazines available. Each month the authors in woodworking magazines do a story about how best to improve your woodworking craft. Whether it’s showing you how you can apply an end to a completed job, or how to make a mortise and tenon joint, something new can be heard each month. Next, is buying educational DVD like those created by Fine Woodworking Magazine. Instructional Woodworking DVD’s cover subjects such as: Assessing your table saw, how to work with a router, how to turn wood projects, turning wooden bowls, and timber finishing basics. As you can see, there are lots of educational resources available for the beginning woodworker to learn the woodworking craft.

|

Woodwork Crafts – The Beginners Guide To Woodworking Woodcraft Project Plans

If you’re just beginning and very interested in doing a DIY project for house then, woodworking could be fun. If you do not have the right information, instruction, and skill, you might land up spending more time and money than you originally intended to spend. As a beginner woodworker, you want to have time and the appropriate tools. Having said, there are a couple of essential factors that you need to remember, before beginning with any woodworking project.

1. If you’re a beginner, you should first need to be very interested in woodworking. Creating something new with your own hands is a special sense. Do not start a project if you’re not interested, because this might land you at a terrible location.

2. Consider the main reason behind making this woodworking project. Decide on the uses of the item you’re making.

3. Consider your abilities and analyze the time that you have, until you begin with a project.

4. Start jobs which you can finish. If you’re in the midst of a work, then it is wise not to begin any project at all.

Woodwork Crafts – The Beginners Guide To Woodworking Woodcraft Project Plans

If you keep these vital things in your mind before beginning a woodworking project, it will become very easy for you to reach success. Woodwork requires planning as much because it takes effort. So how do you begin?

Getting Started Using Woodworking Projects and Strategies for Beginners

Before starting anything, it is essential to choose the woodworking projects you want to start with. As a newcomer, always select a job which has a very basic build up or a very simple construction. Some simple to start projects comprise, bird feeder, chairs, shelves, etc.. The moment you get hold of these techniques, you could always proceed into the next level of woodworking projects, like cabinets, sheds, along with others. Beginning jobs should keyword be complicated and less bothersome so that you have a better comprehension of working with forests and their resources. When the job is selected, begin selecting your tools.

Beginners Woodworking Tools, Woodcraft Project Plans

Tools would be the ways through which you will win the struggle of woodworking. A lot of people think that power tools are requires. But for novices, basic hand tools can be very convenient and more than useful in completing a job. If woodworking is the hobby, then a few tools that you would require are:

1. Workbench – A workbench is needed for precise cuts and measurements. The workbench, when fixed with vises, offer ample space to work. As a key tool, workbench should be part of your newcomer’s woodworking tools.

2. Hammer – Hammer is an essential tool for woodworks. It can help you to drive nails, pins, staples, etc.. A small and lightweight hammer will make matters considerably simple for you. When you buy a hammer, always check the balance between the weight and stand. Always pick a hardy, yet lightweight product.

3. Saw – A saw is another tool which you cannot live without while woodworking. |} This tool helps you to cut forests at several sizes. There are different types of saws available on the market. Choose a size which you can handle.

4. Screwdriver – Screwdrivers are available in various shapes and sizes. Mostly there are Canadian types and standard flat kind. Having all of them will help you in advance woodworking. You can even buy keyword energy screwdrivers since they make the job much quicker.

5. Measuring tape – It’s another essential tool that you cannot work without. The measuring tape helps you to measure wood before they can be attached together.

6. Wrench – Some woodworking jobs require fixing bolts and fixes. For such projects, you require a wrench. However, this isn’t a tool for novices, but having it might make work easier for you in a later stage.

7. Drill – Drill helps you make holes in wood. Power drills are more useful but they cost more. Low wattage power drills will make the task much easy.

8. Other small and fundamental tools – These include pens, gum, basic chewing, amount, erase, first aid kit and shop vac.

Costing and Budget for Your Project

There’s no fixed cost on woodworking projects. Dependent on the sort of project that you want to complete, pricing could be set. The easy the project, the less cost it involves. However, at the very beginning purchasing the tools will probably be a little hefty. Because of this, it is much better to fix a budget first on the resources, then keyword on the undertaking. Purchasing the fundamental tools will ensure that you don’t have to purchase any more material aside from the wood ply.

Time and Instructions

Directions are one of the primary things that each and every beginner should follow. It’s like the woodworking Bible. Instructions guide is very easy to understand the process, what to do and the way to do it. Time also has a significant role in the construction of woodworking jobs. Woodworking projects demand time and so it is crucial for a novice to have ample amount of time every week.

Tips and Tricks for Beginners

There are no quick tips or suggestions that will make the work easy. Nevertheless, the most indispensable thing keyword which can allow you to achieve success is proper planning. With appropriate planning and a strategy, it is likely to achieve success immediately. If you understand the objective of woodworking, then the item that you want to build, the resources you need in order to possess and the typical time it’s possible to devote every day; then you’re all set to go.

Conclusion, Woodcraft Project Plans

All these strategies and instruction is likely to make the woodworking projects and plans for beginners fast to complete. Always ensure you have all the essential tools, materials, space prepared. Keep the instructions for constructing a product handy. Proper strategy and preparation can help you to earn a great woodworking project for your property.

|

Finding Woodworking Projects and Plans for Beginners Woodcraft Project Plans

Folks if you’re trying to find a way to pass time or want an alternative way to generate money they generally turn to a hobby they enjoy. It is very exciting to do and everyone can begin.

When doing woodworking at home there are lots of projects one can consider. When starting out you need to be very cautious when choosing which project to begin with since there are jobs which may be too difficult for a newbie. But do not be concerned about that because we are going to give you tips on the ideal means to begin woodworking as a newcomer.

Just like any other hobby woodworking demands some working equipment, so before you choose your project you have to know if you’ve got the available tools to work on such a job. Try not to spend a good deal of money on purchasing gear when starting out, buy more equipment as you gain more experience and become a professional carpenter. Should you enjoy your hobby then there’ll not be any gap between the hand as well as the hands.

Woodwork Crafts – The Beginners Guide To Woodworking Woodcraft Project Plans

Woodworking in your home will give you time to explore unique jobs and find out so many things. That’s why it’s very important to spend less money when starting out so you can afford to make errors and at some time learning about various jobs.
It is very important you know more about different types of wood available for creating jobs. Anticipate carpenters utilize different kinds of wood quality for decorating pieces, learning what kind of wood they use can help you prepare the wood you will need for certain projects you might want to pursue.
Once you know the basics of wood choice and the usage of different tools you can now implement them in cutting well wood pieces and putting wood together. Knowing what to do can assist you in creating good projects to fulfill your needs.

Woodcraft Project Plans practice makes perfect so make sure that you practice your work daily if at all possible. Try out a lot of layouts using a variety of tools so you may get the hang of working with the tools. When starting out you may earn a range of mistakes but with time you will find out how to correctly utilize them and produce quality projects.

|

Finding Woodworking Projects and Plans for Beginners Woodcraft Project Plans

Woodworking as a hobby can be among the most rewarding experiences you will ever appreciate. You can get started on a shoestring with a minimal amount of tools and equipment. A small home workshop can generate a wide array of simple projects that will allow you to develop your creative and building skills while rewarding you with practical and artistic wood products which you can enjoy and even give away to friends and family.

WHERE TO DO YOUR WOODWORKING

Before we get into the equipment you ought to start with, let us talk about where you will do your woodworking, based on the dimensions of your house, you might have the ability to produce a dedicated space to your woodworking activities. This may be a reserved place in your garage or on your cellar. In some cases, a detached shed or outbuilding may be perfect to set up your first store. A heated store detached from your home provides one distinct advantage: better dust control. Without sophisticated dust control methods, basement assignments will inevitably produce dust which travels to the living area of your home. This is particularly true in homes with forced air heating systems in which cold air yields located in the cellar draw dust up into the top levels of the house. Another advantage of detached workshops is, clearly, the sound level. You can work without disturbing the rest of the household. A good compromise could be the garage of your property.

This can help minimize the difficulties of dust and sound, however depending on where you reside, a keyword garage layout might not be practical during extremes of hot or cold weather.

Starting Your First Woodworking Shop Woodcraft Project Plans

YOUR WOODWORKING SETUP

Space is always a struggle for the woodworker. Irrespective of where you are in your development, everyone from beginner to expert all wishes that they include more space to function in. Woodcraft Project Plans if you can have a dedicated spot for a workshop all the better. Floor tools and bench top equipment can remain in place from project to project. If this setup is not hopeless, at least attempt to create a bench area where equipment can be stored and pulled out as needed. If at all possible plan for inevitable growth as you acquire more tools and gear. At the start, establish a seat area where you are able to store and use the majority of your gear, using a temporary expansion of your actions onto the basement or garage floor.

A basic workbench could be constructed from inexpensive spruce lumber ideally at least 48 to 54 inches wide and 32 inches deep. |} The bench needs to be about waist height. Add a sturdy shelf beneath the seat to house your hand power tools and a pegboard over the bench to hang other equipment. Install a woodworking vice at one end of the seat on front to maintain tiny workpieces.

ACQUIRING YOUR EQUIPMENT, Woodcraft Project Plans

The scope of your startup equipment will be largely based on your financial plan. Whether you have got big financial resources or you’re starting on a shoestring consistently buy quality equipment. If you can afford it, then buy your quality tools at the local building and hardware centre. If your budget is tight buy quality used tools from others through Kijiji or other regional advertisements. You will find an abundance of quality gently used programs out there which belong to people who embarked on that 1 molding project around the house or received tools as presents that they will never utilize. You can usually purchase tools for these sellers for less than half of the initial cost and save even more money should you make a package deal for all their unused equipment. Obviously, acquiring tools from private individuals will take additional time and possibly travel expenditures. Weigh out the advantages of traveling across town to save a few extra dollars on a cheap piece of gear. The extra expense of travel and time in these scenarios is usually justified when purchasing large ticket items like table saws, bandsaws or large finished tools such as surface planers in the future.
For smaller acquisitions, a visit to your construction center may be the ideal approach.

START-UP EQUIPMENT

In earlier times skilled employees worked using a minimal quantity of hand equipment yet generated sophisticated and complex bits. Focus on developing your abilities with your start-up set of tools and prevent lamenting about the equipment you wished you had.
Here is a checklist of the useful tools you’ll need to get started:
Safety Equipment: Start as anticipated with eye protection. Get a decent pair of safety glasses that also offer you some side protection to your eyes. Buy a quality acrylic set that’ll be scratch resistant. Progressive scratching of thinner vinyl pairs will gradually impair your vision and affect safety. Avoid wearing gloves in a workshop. Most impair eyesight and dust up fast. You can avoid wearing them all together if you find them uncomfortable.

The next piece of crucial safety gear you’ll need entails ear protection. Ear protection can be overlooked by the novice woodworker yet is nearly as critical as eye protection. Woodworking can be noisy and long-term exposure to those sound levels can affect hearing and result in tinnitus and other hearing losses. Also, I find that wearing hearing protection combats exhaustion.

Most workers tire quicker when exposed to high sound levels. Select effective hearing protection that you find comfortable and effective. Last, wear a cap to keep the dust out of your hair. I’m keeping the dust from my hair. I am all set!

Power Hand Saw: Often known as a skill saw following the favorite brand name, this may end up being the most versatile instrument in a start-up workshop. In fact, in the hands of a professional, a power hand saw could be employed to construct an entire house. Eventually, you’ll want to purchase a table saw, but for the time being, a power hand saw for the woodworker on a budget empowers him to do cross cuts, rip cuts and even elaborate angle cuts. As mentioned earlier get an excellent brand saw. Stay away from cheap unknown brands. All these tend to cut inaccurately and will burn out before you start your second project. After selecting the proper saw put in a quality blade. Most saws include a starter blade of lesser quality even if they are a fantastic saw. Keep this blade as a backup and install a quality blade with carbide teeth. Begin with a hybrid .

Power Jig Saw: A jigsaw will add great versatility to a woodworking. |} Curved cutting is the point where the jigsaw excels. This flexible instrument cannot only cut corners. It’s ideal for cutting holes in wood too like handle slots. Eventually, you’ll want to get a ring saw. Bandsaws are even more flexible but a excellent floor unit could be costly. A jigsaw may be a good stop gap to the novice woodworker.

Buy an range of blades to your jigsaw that includes various lengths and teeth per inch.

Battery Powered Drill: Purchase a quality drill that runs on at 12 volts, however, 18 volts is better. |} Get one with a keyless chuck and if it is in your budget contemplate a 1/2 inch chuck within the conventional 3/8 inch model. Through hard lessons learned, I have found that buying quality, in this case, is more crucial than ever. Cheaper drills tend to have very short run times and need to be recharged often. Their long-term battery life tends to be poor and to make things worse keyless chucks come loose and slip often. This is 1 annoyance you do not want on your workshop. Purchase an assortment of quality carbide tipped drill bits that are stored in a holder labeling each drill bit size. Create a habit of returning every drill piece to its potential slot in the holder after each use. Lastly, get a pair of hard steel driver bits. Your drill may also be a versatile screwdriver, particularly if you selected an 18-volt model.

Hammer: The hammer stays as the most versatile tool in the store, and often the most misunderstood one. |} By the way, the hammer is the 1 tool where most workshop injuries occur. Although the most ordinary, hammer injuries are often of a minor character, varying from bruised palms into the temporary loss of a fingernail. Hammers significantly vary in price and quality. So what’s the difference between a cheap hammer and an expensive hammer? Quality hammers are just machined with a good solid joint between the handle and head. The fantastic hammer is balanced, doesn’t rust and features a comfortable grip. Most hammers in the high-quality range offer metal or fiberglass handles. Cheaper hammers usually have wood handles with poor joints between the head and handle. The mind typically comes loose and the instrument becomes useless. Select a title brand quality hammer at the 16-ounce scope for general work and also a smaller finishing hammer for more intricate work. Avoid using large framing hammers at the workshop and some other with dimpled head tips. These kinds of hammers are more suited for rough framing jobs and therefore are unsuitable in the workshop.

Palm Sander: Buy a 1/4 sheet palm sander. This tiny power tool can handle pretty much any sanding requirements you have as a beginner woodworker. As your woodworking skills evolve, you’ll likely update to a floor model disc and belt sander. However, for now, the ever-versatile palm sander can clean up borders, cross cuts and even limited quantities of surface space. As you embark on the first few projects you might discover your palm sander with just a little bit of effort can change rough looking creations into virtual functions of art! It is possible to use your palm sander to sand and shape rough boards with 100 grit paper and after finish your work with 200 or even 300 grit paper. Buy an range of sandpaper sheets using an excess supply of 100 grit paper. You’ll find this grade of paper the most versatile in your shop.

Hand Planes and Chisels: These classic tools are essential in every workshop. |} Though low tech in concept, these tools enable you to taper edges, flatten high spots and correct any imperfections in timber bits. {Begin with a standard number 4 plane and an range of quality chisels varying in diameter from 1/4 inch to 1 inch.

Clamps: Sooner or later you’ll need clamps for glue-ups and simply to hold down your wood pieces as you operate on them. Unfortunately, good clamps are costly and it normally takes the beginner woodworker a few years to accumulate a comprehensive set of timber clamps. Start with a set of long”pipe” clamps. Today the pipe was replaced with extended steel shafts, however, the structure remains the same. Get a set of the longest clamps which you could spend. You may get in touch with them for smaller adhesive jobs and expand them to their entire length for larger jobs.

Shop Vice: A store vice installed at the end of the bench is perfect for holding smaller jobs for trimming, filing, and hole cutting with your jigsaw. Purchase a woodworking with stainless steel clamping surfaces and prevent metal functioning vices with steel jaws. Woodworking vices using their wood clamping surfaces may securely hold wood pieces without marring or damaging them. A number of the greater vices offer rapid release mechanisms that enable the user to quickly open and close the jaws with no dull handle turning. The timber clamping surfaces in your vice will periodically need replacement. I prefer to utilize soft pine in my vices that will not crush or damage many of the different woods that I utilize. Whether I’m working in soft pine or hard oak, softwood clamping surfaces work the best.

Tape Measure and Marking Device: In your workshop, the ever-humble tape measure is going to be one of your most frequently used tools. Purchase a fantastic quality name brand tape measure with a wide tape typically from the 25-foot range. Although in your shop you might not be using the tape in these spans, the bigger tape measures provide more rigid tapes that won’t flop around and slip off the ending of planks. Measuring when you are on your own will be a lot simpler, and naturally, quality tape steps can endure for many years.

When marking projects, I prefer a sharp good old-fashioned HB pencil. An HB pencil will produce a nice mark without scratching the wood. Avoid oversized carpenter’s pencils. Their big flat leads are simply too rough for accurate measurement in the workshop.

Other Tool and Materials: Listed below are a couple other useful tools to round out your starter workshop: Purchase a T-square, set square and speed square. These inexpensive tools can assist you in marking the right angles as well as compound angles. Also, get an range of apartment, Robertson and Philips screwdrivers. Get the number two and three Robertson set. I find that the Robertson format works best for most woodworking projects and is the most compatible with a drill powered pieces. Lastly, get a pair of 12-inch wood files. The expense of glue through all your projects is a little cost consideration. Therefore, it makes sense to decide on the very best. I have also found over the years that I receive the best results with both indoor and outdoor projects when I use quality outside grade adhesive. These resin-based compounds unlike traditional water-based wood glue, will not break down and neglect with moisture.

CONCLUSION, Woodcraft Project Plans

The peaceful gratification of woodworking is a wonderful experience in this day and age of rushed lives, smartphones, and time-starved livelihood. With a minimal investment at the most rudimentary equipment and tools, everyone can learn the rewarding abilities of his time-tested hobby and revel in job after project!

  • Storage tips for wine collectors

    PASO ROBLES, Calif. - Allegretto Wines, a single vineyard winemaker in Paso Robles, California,  released the report ‘Storage Tips for Wine Collectors,’ providing tips on storage space, storage methods, the best temperatures for storing and serving, and creative ideas for building a wine cellar on a budget.
     
     “One of the conversation topics in our tasting room is the best storage methods for wine,” said Quin Cody, Director of Hospitality, “the tips in this report are going to help answer some of those questions.”
     
    Following are four tips on the best methods of storing wine:

    Figuring out storage space

    The storage space needed depends on the number of bottles you on hand, or already have but don’t have adequate space. Buying a wine refrigerator is a common solution to storing wine, but sometimes the wine refrigerator may cost more than the family budget allows.
     
    There are options for adding or increasing wine cellar space that include re-purposing a closet or cabinet or even adding a “wine room” in the garage. But before getting into remodeling ideas, you still need to know how many bottles you want to have available. Here is a quick estimate (based on ceilings that are nine feet high): 
     
    500 bottles or less needs about 25 square feet of space
    1,000 bottles would use 50 square feet
     
    It might seem that 500 bottles are a lot of wine, but a single person enjoying a bottle with dinner three or four nights a week adds up to more than 200 bottles a year. Figure in what is shared with dinner guests and gifted to friends and family. If you entertain frequently you can reach 500 bottles a year easily.
     
    The space calculations need to include wines that are being allowed to age, those you are keeping for special occasions and those you will be drinking soon. Once the storage space is figured out, decide on the best affordable storage method that is going to meet the temperature and humidity needs of your special wines.

    Temperature, UV light, and humidity

    Wine is typically stored at one temperature and served at a different temperature. The ideal storage temperature for most reds and whites is 55 degrees. Serving temperatures vary by the wine:
     
    Traditionally, red wines were served at room temperature, but the modern-day thermostat means homes are kept at a variety of temperatures for personal comfort. The ideal serving temperature for red wine is from 60 - 65 degrees F.
     
    White wines are best served slightly chilled between 50 - 60 degrees.
     
    Sparkling wines and champagne usually taste best chilled to around 40 degrees.
     
    The kitchen refrigerator temperature is usually at around 40 degrees F. Too cold to store wine but a good temperature to chill a sparkling wine. Not sure when the wine has reached the appropriate serving temperature? Use an inexpensive wine bottle thermometer to know when the bottle is ready to pour.

    UV rays and humidity

    UV rays cause chemical reactions that can change a wine’s flavor and color in unfavorable ways. Keep your wine collection out of the sunlight.
     
    Wines with cork closures need sufficient humidity at around 70-percent to keep the corks moist and expanded so some kind of humidity control is important. Store corked wines on their sides to help keep the cork moist. Screw top bottles don’t require the same kind of humidity control, but since most people collect both corked and screw-topped wines these days, humidity control is the best way to go.

    Building a ‘cellar’

    Wine coolers, or refrigerators, start at around $200 for 20 or so bottles of wine and price upwards from there. When space is an option, some wine refrigerators can be stored in closets or in the garage and this works perfectly for many people. Some collectors want a more formal “cellar.” Remodeling closets, under stair spaces, kitchens, and garages are becoming popular ways to create dedicated wine storage. There are several good do-it-yourself sources on the Internet or give your local construction company a call for an estimate.
     
    If you are collecting as an investment, leasing commercial wine storage is a safe way to protect your investment.
     
    For more information, visit www.allegrettowines.com.
     

  • Cabinets To Go’s new Texas location first to sell custom closets

    Photo: Kim Giannetti, Community Impact Newspaper
    HOUSTON, Texas - Cabinets To Go, a retailer of solid wood kitchen cabinetry, bathroom vanities and flooring, recently opened a location in Houston, Texas, which is the first in the company to sell custom closets, according to Community Impact Newspaper. 
     
    The store manager told the paper that custom closets would have “55 color options available for different storage needs.”
     
    Cabinets To Go, founded in 2008 by Tom Sullivan, the founder and former leader of Lumber Liquidators, is headquartered in Lawrenceburg, Tennessee, with a 400,000-square-foot distribution facility and more than 60 showrooms nationwide. 
     
    For more information, visit www.cabinetstogo.com.
     

  • California Closets adds Baltimore and New Jersey locations to company-owned operations

    TORONTO - FirstService Corporation, the parent company of California Closets, expanded its company-owned operations with the acquisitions of Baltimore and South New Jersey franchises. 
     
    “These two acquisitions provide key market footholds in the attractive and growing Mid-Atlantic region,” said Charlie Chase, President & CEO of FirstService Brands. “Both operations will benefit from the migration of production into our eastern centralized manufacturing facility in Grand Rapids, Michigan and ongoing investments to increase capacity,” he added.
     
    Following both transactions, California Closets now has 19 company-owned operations among its 80 total franchised territories. Terms of the transactions were not disclosed.
     
    For more information, visit firstservice.com.
     

  • Recession coming? Find out from EBC keynote Alan Beaulieu

    San Jose -- Alan Beaulieu, president and a principal of ITR Economics, will discuss the economic outlook for 2019 in a webinar on Tuesday, January 29 at 3 p.m. Eastern.  His presentation, "Shifting Gears and Looking Ahead," will discuss how the U.S. and global economies are not what they were last year and what to expect in 2019.  The changes that he will discuss include:

    • Policy pressures/benefits on business
    • Consumer behavior
    • Business spending
    • Labor market
    • Commodity prices
    • Interest Rates
    • Impact on our markets

    Attendees will be prepared for the rest of 2019 and will have the confidence to effect tactical changes that will enhance profitability through 2020.  Since 1990, Beaulieu has consulted across North America, Europe, and Asia, optimizing companies’ forecasts and planning to increase profits through his mastery of business-cycle trend analysis. Alan also serves as Senior Economic Advisor to numerous U.S. and international trade associations.  The webinar will be moderated by FDMC editor, Will Sampson.  Register for the webinar.

    Beaulieu has been a frequent keynote at the Executive Briefing Conference, which will be held April 14-16 at the San Jose Marriott. View the full agenda.   The 2019 EBC provides strategic and practical information that addresses manufacturing challenges, and a forum for discovery. EBC helps executives anticipate business opportunities and beat the challenges that lie ahead and will ignite and inspire business leaders to create change when they return home.

  • 2020 holiday design contest winners announced

    LAVAL, Canada - 2020 recently announced the winners of its 2018 Holiday Design Fest Contest. Interior designers submitted their "jolliest and cheeriest" designs using 2020 Design and 2020 Fusion. 
     
    “All the designs that were submitted are both beautiful and very festive,” says Santiago Morales, 2020 Design product manager. “I’m glad designers are using the new 2020 Cloud Decorative Items to decorate their designs, and we will continue to add new items to give users a chance to be even more creative with their designs.”
     
    2020 recently added an array of festive items to its 2020 Cloud that designers can use to create holiday-themed designs. The 2020 Decorative Items catalog is compatible with recent versions of 2020 Design and 2020 Fusion.
     
    The winners of the 2020 Holiday Design Fest Contest are:
    2020 Design: Jessica McLeland from Cabinets.com
    2020 Design: Amy Anderson from Cabinets.com
    2020 Fusion: Paul Abdy from Building & Plumbing Supplies LTD
     
    To learn more about the 2020 holiday design gest contest winners, please visit the 2020spaces.com/2020products/2020-holiday-design-fest/contest/2018-gallery.
     

  • Sustainability challenges to be discussed at Decorative Surfaces Conference

    MIAMI -- All economic activities that occur in the natural world require resources such as energy, materials and land, while generating waste and polluting emissions as unwanted byproduct. Today the demand for natural resources and the production of pollution exceed the regenerative capacity of the Earth and put us face to face with one of the biggest challenges of our time: moving towards a sustainable economy. But what does sustainability mean? Despite its simplicity, sustainability is a concept people have a hard time wrapping their minds around: Is it all about recycling? Are “green” or “natural” synonyms for “sustainable”? And last but not least: how can sustainability be addressed in the laminates industry? Does durability play a role there? Let's dig into those questions and debunk some myths.  Dr. Alessandra Fusi, Sustainability specialist with Trespa and Arpa will address all of these questons in her presentation, "Facing the Sustainability Challenge: What Cards Can Our Industry Play?"
     

    The Decorative Surfaces Conference is produced by TCM North America.
    See the FULL PROGRAM HERE.

    REGISTER

    The meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.

     

  • WMS 2019 reports brisk exhibit sale activity

    Mississauga – CCI Canada, the organization that runs the 2019 Woodworking Machinery & Supply Conference and Expo, reports that exhibit sales are running well ahead of last year’s event a year out from the show.  WMS, to be held October 31 to November 2, 2019,  is more than 30% ahead of the 2017 event's pace in terms of exhibitors and exhibit space.  “Our 2017 event created a lot of positive momentum and exhibit space sales have continued on a roll since then,” said Tim Fixmer, CEO of CCI Canada, Inc.  WMS 2017 featured more than 270 companies and brands.  “We’ve seen a great uptick in new exhibitors and also exhibitors returning after missing a few show cycles,” said Fixmer.
    Planning is underway for an expanded conference agenda that includes an opening morning keynote that will be free for all attendees.  “We plan to have a marquee presenter to kick the show off in a big way,” said Harry Urban, WMS show manager.
    The education portion of WMS will feature two learning tracks and keynote luncheons.   “Our education program will be devoted to best business practices and technology and design trends,” said Urban.   Also new this year will be learning on the show floor.
    According to Urban, a post event survey from WMS 2017, revealed 87% of the show’s 4,500 attendees plan to return to next year’s show.  "This is the show that brings our industry together and makes it stronger," said Trevor Chaulk, president of Chaulk Woodworking in Minden, ON. "With a vast array of topics in the seminars,supplier networking and machinery advancements it provides the tools for a great future in the wood industry," he said

    Registration for WMS 2019 will open in Spring.  Go to wmscanada.ca for updates.

    About CCI Media
    CCI Canada is owned by CCI Media, a business-to-business media company focused exclusively on industrial wood products manufacturing markets in North America. CCI Media’s flagship publication, FDMC magazine, circulates monthly in print and digital formats. CCI Media also publishes the bi-monthly Closets & Organized Storage Magazine. Woodworking Network is the umbrella brand for the combined portfolio of wood manufacturing print, digital, and web products and industry events operated by CCI Media.   
     
    In addition to WMS 2019, CCI Media produces Wood Pro Expo Charlotte and the Cabinets & Closets Conference & Expo, both of which will be co-located March 6-8, 2019 at the Charlotte Convention Center.  
    The company also produces Wood Pro Expo Lancaster 2019, to be held October 17-18, at Warehouse at the Nook, Manheim, PA and the Executive Briefing Conference, April 14-16 in San Jose, CA.
     

  • Next month's Decorative Surfaces Conference offers a glimpse of the future

    MIAMI -- Get a glimpse of the future at the Decorative Surfaces Conference 2018, 4-6 December in Miami, organized by TCM North America.

    Conference topics include:

    •    The latest on lightweight decorative surfaces: Not just for RTA anymore! The incredible realism of these materials have put architectural surfaces in play. We’ll be analyzing these opportunities.

    •    3D Laminates :  The new design leader? Flexible surfaces offer design options no other material can, and specifiers are taking notice.

    •    Digital scanning and printing of decorative surfaces come of age: Technology that scans and print not just visuals, but textures as well, is about to revolutionize the surfacing industry.

    •    Are composite-wood decorative panels the most sustainable option on the planet? New ways of defining “sustainability” put our materials solidly at the top of the green column.

    •    Formaldehyde:   Addressing “The F-word” with a dose of common sense. There’s a broader context in which we should be talking about this basic organic building block used in thousands of everyday products.

    VIEW FULL PROGRAM.

    The  meeting will be held at the beautiful Miami Biltmore Hotel for two days of presentations from the global leaders in design and surfacing technology. Ample time for networking, and even a little golf, make this the industry’s top event for users of decorative surfaces. Don’t miss it!

    REGISTER before November 9 and save $100.

    Preferred hotel rates end in 9 November, or until our reserved block of rooms is gone, so don’t delay!

    Contact Kenn Busch – [email protected] – with questions about attending and sponsoring.
     

  • Closets industry study findings to be revealed in Charlotte

    CHARLOTTE -- The results of a state of the industry study conducted by Closets & Organized Storage Magazine will be presented exclusively to attendees of the Cabinets & Closets Conference & Expo, March 6-8 at the Charlotte Convention Center.  "We're excited to conduct this study to see where the industry stands and where it's headed, " said Laurel Didier, publisher of Closets & Organized Storage. CCCE 2019 attendees will be the first to receive the results by participating in our conference on March 6." View full conference agenda.

    The main focal points of the study include:

    • The size of the industry.
    • The average sales price for a  master bedroom walk-in closet, laundry room, mudroom, multi-use room with a wall bed and built-ins and garage cabinets and storage
    • The most commonly requested accessories for a master bedroom closet and garage makeover.
    • The average sales volume for closet companies, independent vs dealers, franchisees.
    • Colors and materials are trending in closet and garage cabinets
    • How are designers compensated?
    • Designers average closing ratio.
    • What percentage of  closets companies ' products do they make vs buy?
    • What is the craziest thing a customer asked a designer to include in the design plans?
    • What keeps closet industry executives up at night?

    The Cabinets & Closets Conference & Expo is an annual event featuring a full-day conference, plant tour, and exposition, and is dedicated to home remodeling professionals specializing in building kitchen cabinets, closets, and other home storage designs. Scheduled for March 6-8, 2019 at the Charlotte Convention Center, the Cabinets & Closets Conference and Expo will co-locate with Wood Pro Expo, which is held annually in Charlotte.
    The Wood Pro Expo brand comprises a series of strategic regional events, located in key areas throughout the United States where professional woodworkers congregate. Wood Pro Expo features a full day of education and tours followed by two expo days oriented to equipment and supplies focused on the small-to-medium size shops. The educational offering includes CNC basics, employee recruitment, finishing, lean manufacturing, business management, software, and shop safety. For information on Wood Pro Expo Charlotte, visit WoodProExpoCharlotte.com.

     

  • Learn about American Woodmark's foray into RFID

    ATLANTA, GA -- According to Henry Nisiobincki, the idea that each item is unique in woodworking holds true more than in any other industry. Nisiobincki, RFID Program Manager at American Woodwork Corporation, faced this challenge as he guided the company to benefit from RFID (Radio-Frequency Identification) technology.

    "The questions we asked were, how could we identify the unique history of each unique part?  And how can we use that information to help measure quality, control process flows, and improve inventory accuracy?"

    Nisiobincki said that by using integrated RFID technology to create a unique identity for each piece, American Woodmark Corporation has seen continuous benefit and value.  He will show how a simple low-cost addition to each piece can be the solution for endless cost-savings, as well as the platform for future innovation.  He will discuss American Woodmark's RFID integration  in his presentation at IWF on August 21, titled,  A Unique Technology, in a Unique Part, for a Unique Industry. His session is part of the all-day Woodworking Network Leadership Forum.  The Leadership Forum is sponsored by J B Cutting.

    At American Woodmark Corporation, Nisiobincki manages the RFID Program from a corporate level. He works closely with  the organization's manufacturing plants to understand processes, identify key issues, and develop unique and innovative RFID technology solutions to relieve those issues. His career at American Woodmark started in IT Development and IT Project Management before transitioning into RFID. He said  is excited to share the unique and extensive application of RFID at IWF.


    The targeted audience for this session includes: C-Level management, rising stars and innovators from across the wood products industry including CEO’s, owners, team managers and entrepreneurs and investors.  Registration for the Woodworking Network Leadership Forum is $395 until August 1 and $450 thereafter.  Lunch and admission to the Leadership Reception following the symposia are included.

     

Woodcraft Supply

Woodcraft Supply, LLC operates woodworking specialty retail stores across the United States (including 34 of 50 U.S. states). It also publishes a woodworking industry magazine, distributes consumer catalogs (in all 50 U.S. states and 117 countries)[1] and operates an ecommerce website.[2] The stores, catalogs and website combined sell about 20,000 products covering wood working tools, raw materials, instructional media and project kits.[3][4][5][6]

In the 1960s, Roger Wells bought Woodcraft and moved the headquarters to Woburn, Massachusetts. Woodcraft moved into a warehouse and corporate office after the success of its initial printed ads which led to creation of its catalog. Sam Ross, founder of SBR Inc., bought Woodcraft in 1972 and used his retail experience to build new stores and grow the company. In 1992, Sam Ross moved Woodcraft headquarters to Parkersburg, West Virginia.[8][9]

Woodcraft opened a new Boston area corporate location in Walpole, Massachusetts in 2013. That same year, Woodcraft and the Swiss toolmaker Pfeil celebrated 50 years as international business partners.[12]

Video: Woodworking Tools